BS EN 60335-2-51-2003+A1-2008 Household and similar electrical appliances – nSafety nPart 2-51 Particular requirements for stationary circulation pumps nfor heating and service wat.pdf

1、BRITISH STANDARD BS EN 60335-2-51:2003 +A1:2008 Household and similar electrical appliances Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations ICS 23.080; 91.140.10 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/03/2009 0

2、2:47, Uncontrolled Copy, (c) BSIBS EN 60335-2-51:2003+A1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 24 July 2003 BSI 2008 ISBN 978 0 580 59164 8 National foreword This British Standard is the UK implementation of EN 60335-2-51:2003+

3、A1:2008. It is identical with IEC 60335-2-51:2002, incorporating amendment 1:2008. It supersedes BS EN 60335-2-51:2003, which will be withdrawn on 1 May 2013. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry t

4、he number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. A list of organizations represented on this subcommittee can be obtained on This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

5、application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication Date Comments Implementation of IEC amendment 1:2008 with The UK participation in its preparation was entrusted by Technical Committee request to its secretar

6、y. CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/01, Motorized appliance group. 30 November 2008 CENELEC endorsement A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/03/2009 02:47, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EU

7、ROPISCHE NORM June 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form an

8、d by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-51:2003 E ICS 23.080; 91.140.10 Supersedes EN 60335-2-51:1997English version Household and similar electrical appliances Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water

9、 installations (IEC 60335-2-51:2002) Appareils lectrodomestiques et analogues Scurit Partie 2-51: Rgles particulires pour les pompes de circulation fixes pour installations de chauffage et de distribution deau (CEI 60335-2-51:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke

10、 Teil 2-51: Besondere Anforderungen fr ortsfeste Umwlzpumpen fr Heizungs- und Brauchwasseranlagen (IEC 60335-2-51:2002) This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givin

11、g this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official ve

12、rsions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees

13、of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EN 60335-2-51:2003+A1 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04

14、/03/2009 02:47, Uncontrolled Copy, (c) BSIForeword The text of the International Standard IEC 60335-2-51:2002 (61/2220/FDIS), prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the Unique Acceptance Procedure and was approved by CENELE

15、C as EN 60335-2-51 on 2003-05-01. This European Standard replaces EN 60335-2-51:1997. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-05-01 - date on which national

16、 standards conflicting with the EN have to be withdrawn (dow) 2006-05-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and re

17、visions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety r

18、equirements for electric stationary circulation pumps for heating and service water installations. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevan

19、t text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101,

20、 including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specif

21、ications: in italic type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other

22、than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ Page 2 BS EN 60335-2-51:2003+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/03/2009 02:47, Uncontrolled Copy, (c) BSIFore

23、word to amendment A1 The text of document 61/3556/FDIS, future amendment 1 to IEC 60335-2-51:2002, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-5

24、1:2003 on 2008-05-01. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-02-01 - date on which national standards conflicting with the amendment have to be with

25、drawn (dow) 2013-05-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-51:2003. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2008 to

26、the International Standard IEC 60335-2-51:2002 was approved by CENELEC as an amendment to the European Standard without any modification. _ Page 3 BS EN 60335-2-51:2003+A1:2008 Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are

27、 fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the releva

28、nt essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-51:2002 was approved by CENELEC as a European Standard without any mod

29、ification. _ In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/03/2009 02:47, Uncontrolled Copy, (c) BSI Page 4 BS EN 60335-2-51:2003+A1:2008 Licensed Cop

30、y: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/03/2009 02:47, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION.61 Scope.7 2 Normative references.7 3 Definitions7 4 General requirement.8 5 General conditions for the tests 8 6 Classification8 7 Marking and instructions.8 8 Protection against access to

31、live parts9 9 Starting of motor-operated appliances 9 10 Power input and current .9 11 Heating9 12 Void .10 13 Leakage current and electric strength at operating temperature10 14 Transient overvoltages .10 15 Moisture resistance10 16 Leakage current and electric strength.10 17 Overload protection of

32、 transformers and associated circuits .10 18 Endurance10 19 Abnormal operation10 20 Stability and mechanical hazards .11 21 Mechanical strength .11 22 Construction.11 23 Internal wiring.11 24 Components.11 25 Supply connection and external flexible cords 12 26 Terminals for external conductors.12 27

33、 Provision for earthing .12 28 Screws and connections.12 29 Clearances, creepage distances and solid insulation12 30 Resistance to heat and fire.12 31 Resistance to rusting12 32 Radiation, toxicity and similar hazards12 Annexes .13 Bibliography13 Table 101 Temperature classification of circulation p

34、umps.8 Page 5 BS EN 60335-2-51:2003+A1:2008 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/03/2009 02:47, Uncontrolled Copy, (c) BSIINTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified

35、and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situ

36、ations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appli

37、ance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered far as is reasonable. If applicable, the influence of one function on the other is taken into account. An appliance that co

38、mplies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having for

39、ms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. in Part 1, Part 1 applies. NOTE 1 not necessary to

40、 specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic

41、 standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such a

42、s Page 6 BS EN 60335-2-51:2003+A1:2008 by another Part 2 of IEC 60335, the relevant Part 2 is applied to each function separately, as When a Part 2 standard does not include additional requirements to cover hazards dealt with This means that the technical committees responsible for the Part 2 standa

43、rds have determined that it is ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or Part 2 standards. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/03/2009 02:47, Uncontrolled Copy, (c) BSI HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-51: Particular requ

44、irements for stationary circulation pumps for heating and service water installations 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric stationary circulation pumps intended for use in heating systems or in service water systems

45、, having a rated power input not exceeding 300 W, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 The hydraulic and electrical parts of the pump may be in the same enclosure, so that the water flows through the motor and serves as a

46、coolant, or they may be separated. Appliances not intended for normal household use, but that nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. As far as is practicab

47、le, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account NOTE 102 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or airc

48、raft, additional requirements may be necessary; in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 103 This standard does not apply to pumps for circulating liquid

49、s other than water; pumps, other than circulation pumps (IEC 60335-2-41); circulation pumps intended exclusively for industrial purposes; circulation pumps intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour, or gas). 2 Normative references This clause of Part 1 is applicable. 3 Definitions This clause of Part 1 is applicable e