1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Household and similar electricalappliances Safety Part 2-68: Particular requirements for spray extractionmachines
2、 for commercial useBS EN 60335-2-68:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 07:37, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60335-2-68:2009. It was derived by CENELEC from IEC 60335-2-68:2002, incorporating amendmen
3、ts 1:2005 and 2:2007. It supersedes BS EN60335-2-68:2003 which is withdrawn.The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by tags (e.g. ).The start and finish of text introduced or altered by amendment is indicated in the text by tags.
4、 Tags indicating changes to IEC text carry the numbers of the IEC amendment. For example text altered by IEC amendment 1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/
5、61/10, Floor treatment machines (industrial).A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2009 ISBN 978
6、 0 580 65817 4 ICS 97.020; 97.080 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2009Amendments issued since publicationAmd. No. Date Text affectedB
7、RITISH STANDARDBS EN 60335-2-68:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 07:37, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60335-2-68 NORME EUROPENNE EUROPISCHE NORM September 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Norma
8、lisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-68:2009 E ICS 97.020 Supersedes EN 60
9、335-2-68:2003 + A1:2006 + corr. Dec.2006 + A2:2007English version Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines for commercial use (IEC 60335-2-68:2002 + A1:2005 + A2:2007, modified) Appareils lectrodomestiques et analogues -
10、Scurit - Partie 2-68: Rgles particulires pour les machines de nettoyage par pulvrisation et aspiration usage commercial (CEI 60335-2-68:2002 + A1:2005 + A2:2007, modifis) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-68: Besondere Anforderungen fr Sprhextraktionsmasch
11、inen fr den gewerblichen Gebrauch (IEC 60335-2-68:2002 + A1:2005 + A2:2007, modifiziert) This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the st
12、atus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German
13、). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria,
14、Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin,
15、ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 07:37, Uncontrolled Copy, (c) BSIEN 60335-2-68:2009 2 Foreword In the light of the necessity to adapt EN 60335-2-68 with regard to the requirements of the Machinery Directive 2006/42/EC, a draft was prepared by CENELEC TC61/WG6/J in co-operation with the MD C
16、onsultant, taking also into account the results of CENELEC TC61/WG6 work on EN 60335-1. The approach to amend EN 60335-2-68:2003 aiming toward listing the standard under the MD was discussed and approved during the Kista meeting of CENELEC TC 61 in June 2008 (see CLC/TC 61/SEC/1649), when it was dec
17、ided to submit a draft for an amendment to the Unique Acceptance Procedure. The draft was circulated as FprAB in December 2008 and was approved by CENELEC as a new edition of EN 60335-2-68 on 2009-09-01. This European Standard supersedes EN 60335-2-68:2003 + A1:2006 + corrigendum December 2006 + A2:
18、2007. In this European Standard the common modifications to the International Standard IEC 60335-2-68:2002 + A1:2005 + A2:2007 are indicated by a vertical line in the left margin of the text. The following dates are applicable: latest date by which the EN has to be implemented at national level by p
19、ublication of an identical national standard or by endorsement (dop) 2009-12-29 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-12-29 This Part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part
20、 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This Part 2 suppleme
21、nts or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for spray extraction machines for commercial use. When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies. When this standard states “add
22、ition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 2006/42/EC
23、. See Annex ZZ. NOTE 1 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clau
24、se or subclause; additional annexes are lettered AA, BB, etc.; subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 07:37, Uncontrolled Copy, (c) BSI 3 EN 60335-2-68:2009 NOTE
25、2 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. Special national con
26、ditions causing a deviation from this European Standard are listed in Annex ZA and are in addition to those in EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2
27、010 07:37, Uncontrolled Copy, (c) BSIEN 60335-2-68:2009 4 Contents Introduction .6 1 Scope 7 2 Normative references 7 3 Definitions 8 4 General requirement 10 5 General conditions for the tests . 10 6 Classification 11 7 Marking and instructions 11 8 Protection against access to live parts . 13 9 St
28、arting of motor-operated appliances . 14 10 Power input and current . 14 11 Heating . 14 12 Void 14 13 Leakage current and dielectric strength at operating temperature 14 14 Transient overvoltages . 14 15 Moisture resistance 14 16 Leakage current and electric strength 16 17 Overload protection of tr
29、ansformers and associated circuits . 16 18 Endurance 16 19 Abnormal operation 16 20 Stability and mechanical hazards . 17 21 Mechanical strength . 18 22 Construction . 21 23 Internal wiring . 22 24 Components . 22 25 Supply connection and external flexible cords . 23 26 Terminals for external conduc
30、tors 24 27 Provision for earthing . 24 28 Screws and connections 24 29 Clearances, creepage distances and solid insulation 24 30 Resistance to heat and fire . 24 31 Resistance to rusting 25 32 Radiation, toxicity and similar hazards . 25 Annex ZA (normative) Special national conditions . 29 Annex ZC
31、 (normative) Normative references to international publications with their corresponding European publications 29 Annex ZE (informative) Specific additional requirements for appliances and machines intended for commercial use 30 Annex ZZ (informative) Coverage of Essential Requirements of Directive
32、2006/42/EC 30 Bibliography . 31 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 07:37, Uncontrolled Copy, (c) BSI 5 EN 60335-2-68:2009 Figure 101 Impact test apparatus . 26 Figure 102 Apparatus for testing the abrasion resistance of current-carrying hoses 27 Figure 103 Apparatus fo
33、r testing the resistance to flexing of current-carrying hoses 27 Figure 104 Configuration of the hose for the freezing treatment . 28 Figure 105 Flexing positions for the hose after removal from the freezing cabinet 28 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 07:37, Uncontro
34、lled Copy, (c) BSIEN 60335-2-68:2009 6 Introduction It has been assumed in the drafting of this European Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against ha
35、zards such as electrical, mechanical, thermal, fire and radiation of machines when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can a
36、ffect the safe operation of machines. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the machine is connected to the supply mains. However, national wiring rules may differ. If a machine within the scope of
37、this standard also incorporates functions that are covered by another Part 2 of EN 60335, the relevant Part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. This standard is a product family standard d
38、ealing with the safety of machines and takes precedence over horizontal and generic standards covering the same subject. A machine that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is
39、found to have other features that impair the level of safety covered by these requirements. A machine employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if
40、found to be substantially equivalent, may be considered to comply with the standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 07:37, Uncontrolled Copy, (c) BSI 7 EN 60335-2-68:2009 Household and similar electrical appliances Safety Part 2-68: Particular requirements for spra
41、y extraction machines for commercial use 1 Scope This clause of Part 1 is replaced by the following. This European Standard deals with the safety of electrical portable, non self-propelled motor-operated spray extraction machines with or without attachments and with or without electrical heating ele
42、ments, intended for commercial indoor use. NOTE Z101 Commercial use of spray extraction machines is for example their use in hotels, schools, hospitals, factories, shops and offices for other than normal housekeeping purposes and rental services for those machines. The following power systems are co
43、vered: mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, battery powered motors. This standard applies to machines in which the pressure of the employed cleaning agent does not exceed 2,5 MPa, and in which the product of the pressure (in
44、MPa) and the flow of cleaning agent (in litres per minute) does not exceed 100, and in which the temperature of the cleaning agent at the spray nozzle outlet does not exceed 85 C. NOTE Z102 Attention is drawn to the fact that in many countries additional requirements on the safe use of the equipment
45、 covered may be specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. This standard does not apply to machines designed to be part of a production process; wet and dry vacuum cle
46、aners as covered by IEC 60335-2-69; machines designed for picking up hazardous dusts, inflammable substances, or aflame particles; floor treatment machines for commercial use; NOTE Z103 IEC 60335-2-67 covers floor cleaning and floor treatment machines for industrial and commercial use. IEC 60335-2-7
47、2 covers automatic floor treatment machines for industrial and commercial use. machines designed for use in corrosive or explosive environments (dust, vapour or gas); hand-held appliances; hand-held and transportable motor-operated electric tools. NOTE Z104 The IEC 60745 series covers hand-held moto
48、r-operated electric tools; the IEC 61029 series covers transportable motor-operated electric tools. 2 Normative references This clause of Part 1 is applicable except as follows. Addition: IEC 60312, Vacuum cleaners for household use Methods of measuring the performance Licensed Copy: Wang Bin, ISO/E
49、XCHANGE CHINA STANDARDS, 13/05/2010 07:37, Uncontrolled Copy, (c) BSIEN 60335-2-68:2009 8 IEC 60335-2-69, Household and similar electrical appliances Safety Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use IEC 60704-2-1, Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-1: Particular requirements for vacu
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1