BS EN 60371-3-8-1996 Insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables《云母基绝缘材料 单项材料规范 耐燃烧安全电缆用云母纸带.pdf

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Part 3: Specifications for individual materials Sheet 8: Mica paper tapes for flame-resistant secur

2、ity cablesThe European Standard EN 60371-3-8:1995, incorporating amendment A1:2007, has the status of a British StandardICS 29.040.20Specification forInsulating materials based on mica BRITISH STANDARDBS EN 60371-3-8:1996Incorporating amendment no. 1BS EN 60371-3-8:1996This British Standard was publ

3、ished under the authority of the Standards Board and comes into effect on 15 March 1996 BSI 2007ISBN 978 0 580 59336 9Amendments issued since publicationAmd. No. Date Comments17204 31 July 2007 See national forewordThe UK participation in its preparation was entrusted to Technical Committee GEL/15,

4、Insulating materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot

5、confer immunity from legal obligations.National forewordThis British Standard is the UK implementation of EN 60371-3-8:1995, incorporating amendment A1:2007. It is identical with IEC 371-3-8:1995, incorporating corrigendum August 1995 and amendment 1:2007.The start and finish of text introduced or a

6、ltered by amendment is indicated in the text by tags !“. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.EUROPISCHE NORMICS 29.040.20Descriptors: Electrical insulating material ducts, glass cloth, electric cab

7、les, fire resistanpackingSheetMatriaux isolants baPartie 3: SpcificaparticuliersFeuille 8: Ruban cbles de sttee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueektrotechniStassart 3Europisches Komitee fr ElCentral Secretariat: rue de 1995 Copyright reserved to CENE

8、LEC membersRef. No. EN 60371-3-8:1995 Esche Normung5, B-1050 BrusselsEuropean Commistandards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by

9、translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ir

10、eland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENELEC(CEI 60371-3-8:1995 + corrigendum 1995) (IEC 60371-3-8:1995 + Corrigendum 1995)This European Standard was approved by CENELEC on 1995-07-04. CENELEC members are bound to comply with the CEN/

11、CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national English versionInsulating materials based on micaPart 3: Specifications for

12、individual materials8: Mica paper tapes for flame-resistant security cables(IEC 60371-3-8:1995 + corrigendum 1995)se de mications pour matriaux base de papier de mica pour curit rsistant la flammeGlimmererzeugnisse fr elektrotechnische ZweckeTeil 3: Bestimmungen fr einzelne MaterialienBlatt 8: Glimm

13、erbnder fr flammwidrigeSicherheitskabelSeptember 1995+A1May 2007s, solid electrical insulating materials, electrical insulating paper, micaceous proce, designation, specifications, composition, compositional tolerances, tensile strength, EUROPEAN STANDARDNORME EUROPENNEEN 60371-3-8EN 60371-3-8:1995F

14、orewordThe text of document 15C/475/DIS, future edition 1 of IEC 60371-3-8, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC with its corrigendum August 1995 as EN 60371-3-8 on 1995-07-04.The following

15、dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given for information only. In this standard, Annex ZA is normative and Annex A informative. Annex ZA has been added by CENELEC.Foreword to amendment A1The text of document 15/

16、361/FDIS, future amendment 1 to IEC 60371-3-8, prepared by IEC TC 15, Solid electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60371-3-8:1995 on 2007-05-01.The following dates were fixed: Annex ZA has been added by CENELE

17、C.Endorsement noticeThe text of amendment 1:2007 to the International Standard IEC 60371-3-8:1995 was approved by CENELEC as an amendment to the European Standard without any modification. latest date by which the EN has to be implemented at national level by publication of an identical national sta

18、ndard or by endorsement (dop) 1996-08-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 1996-08-01 latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-

19、02-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2010-05-01 BSI 20072EN 60371-3-8:1995 Introduction!This part of IEC 60371 forms part of a series which deals with insulating materials built up from mica splittings or mica paper, with or with

20、out reinforcement, and with mica paper in its pure state for use in electrical equipment.IEC 60371 consists of three parts under the main title Insulating materials based on mica:Part 1: Definitions and general requirementsPart 2: Methods of testPart 3: Specifications for individual materialsThis st

21、andard contains one of the sheets comprising Part 3: Sheet 8: Mica paper tapes for flame-resistant security cables.“1 ScopeThis International Standard specifies the requirements for an electrical insulating material containing mica paper with glass fabric or plastic film and impregnated with a suita

22、ble resin. The material is supplied in a flexible state. It may be supplied in the form of sheets or rolls. The product is designed for use in cables capable of operating after a fire.This specification covers material having a nominal thickness from 0,05 mm to 0,15 mm.Materials which conform to thi

23、s specification meet established levels of performance. However, the selection of a material for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.!Safety warning It is the responsibility

24、 of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.“2 Normative references!The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated ref

25、erences, the latest edition of the referenced document (including any amendments) applies. IEC 60371-2:2004, Specification for insulating 3 DesignationWhen ordering material to this specification, only the specification and type numbers need be quoted (see Table 1, Table 2, Table 3 and Table 4).Exam

26、ple: !IEC 60371-3-8:“ type 8.1.01The type number is derived from: The descriptive code quoted in Table 1, i.e. G23/M50/R20 for type 8.1.01, Table 1, is derived from: glass content (G) 23 g/m2 muscovite mica content (M) 50 g/m2 resin content (R) 20 g/m2The descriptive code quoted in Table 2, i.e. G23

27、/P60/R16 for type 8.2.01, Table 2, is derived from: glass content (G) 23 g/m2 phlogopite mica content (P) 60 g/m2 resin content (R) 16 g/m2The descriptive code quoted in Table 3, i.e. F23/M50/R14 for type 8.3.01, Table 3, is derived from: thickness of the film (F) 23 4m muscovite mica content (M) 50

28、 g/m2 resin content (R) 14 g/m2NOTE If film is used instead of glass, the thickness of the film (in 4m) is used in the descriptive code, see !IEC 60371-3-7“, clause 3.4 Requirements: raw materials4.1 Mica paperMica paper referred to in this specification shall comply with the requirements of !IEC 60

29、371-3-2“.4.2 Glass fabricNormally the glass fabric shall be in the loom state and shall have a size content not greater than 3 % by weight. By agreement between purchaser and seller, it may be treated.4.3 FilmAs an alternative to glass fabric, films may be used as the backing material. The type of f

30、ilm should be subject to the purchase contract. the specification sheet number 8 plus the sheet table number 8.1 plus the number of the product in the sheet table 8.1.01. BSI 2007 3materials based on mica Part 2: Methods of test.IEC 60371-3-2:2005, Insulating materials based on mica Part 3: Specific

31、ations for individual materials Sheet 2: Mica paper.“EN 60371-3-8:1995Table 1 Composition for glass fabric and calcined muscovite mica paper(!IEC 60371-3-2“, classes 1 and 2) Table 2 Composition for glass fabric and uncalcined muscovite and phlogopitemica paper (!IEC 60371-3-2“, classes 3 and 4) Tab

32、le 3 Composition for film and calcined muscovite mica paper(!IEC 60371-3-2“, classes 1 and 2) Type Descriptive codeGlass contentMica contentResin contentMass/unit areaPermissible thickness rangeVolatile contentg/m2g/m2g/m2g/m2mmNom. Tol.Nom. Tol.Nom. Tol.Nom. Tol.Mean Individual Max. %8.1.018.1.028.

33、1.038.1.048.1.05G23/M50/R20G23/M60/R21G23/M75/R32G23/M90/R34G23/M120/R4023232323232222250607590120456810202132344055789931041301471839111315180,070,090,070,090,100,120,100,120,120,150,060,100,060,100,090,130,090,130,110,161,01,01,01,01,0NOTE Combinations with other glass fabrics are possible.Type De

34、scriptive codeGlass contentMica contentResin contentMass/unit areaPermissible thickness rangeVolatile contentg/m2g/m2g/m2g/m2mmNom. Tol.Nom. Tol.Nom. Tol.Nom. Tol.Mean Individual Max. %8.2.018.2.028.2.038.2.048.2.058.2.068.2.078.2.088.2.098.2.10G23/P60/R16G23/P75/R18G23/P80/R18G23/M80/R18G23/P90/R21

35、G23/M90/R21G32/P120/R23G32/M120/R23G32/P160/R30G32/M160/R302323232323233232323222222233336075808090901201201601605677881010141416181818212123233030444455667799116121121134134175175222222101212121313181822220,070,090,100,120,100,120,100,120,100,120,100,120,120,140,120,140,130,160,130,160,060,100,090,

36、130,090,130,090,130,090,130,090,130,110,160,110,160,120,170,120,171,01,01,01,01,01,01,01,01,01,0NOTE Combinations with other glass fabrics are possible.Type Descriptive codeFilm contentMica contentResin contentMass/unit areaPermissible thickness rangeVolatile contentg/m2g/m2g/m2g/m2mmNom. Tol.Nom. T

37、ol.Nom. Tol.Nom. Tol.Mean Individual Max. %8.3.018.3.028.3.038.3.048.3.05F23/M50/R14F23/M60/R14F23/M75/R16F23/M90/R18F23/M120/R20343434343455555506075901204568101414161820555669810812514217410111314170,050,080,050,080,060,090,060,090,100,120,040,090,040,090,050,100,050,100,090,131,01,01,01,01,0NOTE

38、Combinations with other film thicknesses are possible. BSI 20074EN 60371-3-8:1995Table 4 Composition for film and uncalcined muscovite and phlogopite mica paper(!IEC 60371-3-2“, classes 3 and 4)4.4 ResinAny resin system may be used which enables the material to meet the requirements of this specific

39、ation and particularly the flame resistance characteristics.5 Requirements: composition and tolerances!When tested by the method of Clause 7 of IEC 60371-2, the composition of the products shall lie within the limits of Table 1 to Table 4 for the appropriate grade of mica paper.“6 Requirements of ma

40、terial (as received)6.1 GeneralAll materials in any one consignment shall have the same properties, within the limits of this specification, throughout the length of each roll.The surfaces shall be uniform and free from defects such as bubbles, pin-holes, creases and flaws.Material supplied in rolls

41、 shall be capable of being unrolled continuously without damage, and the force required to unroll the material shall be substantially uniform.Unless otherwise specified in the purchase contract, the material shall be rolled with the mica surface on the outside.6.2 WidthThe maximum trimmed width of f

42、ull width material and sheet normally available is 1 000 mm.The tolerance on the width of the material shall be as in Table 5. Table 5 Tolerance on width6.3 Thickness!Measure the thickness in accordance with Clause 4 of IEC 60371-2, using the appropriate apparatus given in 4.1.1 of that standard, ma

43、king 10 measurements uniformly distributed on one thickness of material.“The measured values shall be in accordance with the requirements given in Table 1 to Table 4.6.4 LengthThere are no requirements in this specification for roll length, and these should therefore be subject to the purchase contr

44、act.Preferred lengths are 250 m, 500 m and 750 m.6.5 CoresThe tape shall be supplied compactly wound on cores of 76 mm interior diameter which shall be free from sharp edges.The width of the cores in relation to that of the tape Type Descriptive codeFilm contentMica contentResin contentMass/unit are

45、aPermissible thickness rangeVolatile contentg/m2g/m2g/m2g/m2mmNom. Tol.Nom. Tol.Nom. Tol.Nom. Tol.Mean Individual Max. %8.4.018.4.028.4.038.4.048.4.058.4.068.4.078.4.088.4.098.4.10F23/P60/R11F23/P75/R15F23/P80/R15F23/M80/R15F23/P90/R16F23/M90/R16F23/P120/R22F23/M120/R22F23/P160/R32F23/M160/R32343434

46、34343434343434555555555560758080909012012016016056778810101414111515151616222232324555666699105124129129140140176176226226111213131515181823230,050,080,060,090,060,090,060,090,060,090,060,090,100,120,100,120,110,130,110,130,040,090,050,100,050,100,050,100,050,100,050,100,090,130,090,130,100,140,100,

47、141,01,01,01,01,01,01,01,01,01,0NOTE Combinations with other film thicknesses are possible.Nominal widthmmTolerancemmk20 20 k500 500 0,5 1,0 5,0 BSI 2007 5This specification contains no requirements for widths of tape. However, the following widths are preferred: 6 mm, 8 mm, 10 mm, 12 mm, 15 mm, 20

48、mm, 25 mm, 30 mm, 40 mm and 50 mm.should be subject to the purchase contract.Full width material and material wider than 100 mm shall be supplied on 55 mm or 76 mm cores.EN 60371-3-8:19956.6 JoinsThe number of rolls with joins shall be limited to 25 % of any one consignment. Joined rolls of length l

49、ess than or equal to 300 m shall contain no more than one join.The number of joins in rolls of length greater than 300 m and the method of making the join should be subject to the purchase contract.6.7 Tensile strength!When tested by the method of Clause 8 of IEC 60371-2, the tensile strength in the warp and weft directions shall be as shown in Table 6.“Table 6 Tensile strength6.8 Stiffness!The stiffness of the ma