BS EN 60371-3-9-1996 Insulating materials based on mica - Specifications for individual materials - Moulding micanite《云母基绝缘材料 单项材料规范 模压成形的人造云母》.pdf

1、BRITISH STANDARDBS EN 60371-3-9:1996Incorporating amendment no. 1Specification forbased on mica g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Part

2、 3: Specifications for individual materials Sheet 9: Moulding micaniteThe European Standard EN 60371-3-9:1995, incorporating amendment A1:2007, has the status of a British StandardICS 29.040.20Insulating materials BS EN 60371-3-9:1996This British Standard was published under the authority of the Sta

3、ndards Board and comes into effect on 15 April 1996 BSI 2007 ISBN 978 0 580 59337 6The UK participation in its preparation was entrusted to Technical Committee GEL/15, Insulating materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publicat

4、ion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date Comments17203 31 July 2007 See national fore

5、wordNational forewordThis British Standard is the UK implementation of EN 60371-3-9:1995, incorporating amendment A1:2007. It is identical with IEC 371-3-9:1995, incorporating corrigendum August 1995 and amendment 1:2007. The start and finish of text introduced or altered by amendment is indicated i

6、n the text by tags !“. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.EUROPISCHE NORMICS 29.040.20Desc micaceous prod gEnglish versionMatriaux isolants baPartie 3: SpcificaparticuliersFeuille 9: Micanite moul

7、able5)ttee for Electrotechnical StanComit Europen de Normalisation ElectrotechniqueektrotechniStassart 3Europisches Komitee fr ElCentral Secretariat: rue de 1995 Copyright reserved to CENELEC membersRef. No. EN 60371-3-9:1995 Esche Normung5, B-1050 BrusselsEuropean Commi dardizationThis European Sta

8、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the natio

9、nal electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENELECThis European Standard was approved by CENELEC on 1995-07-04. CENELEC members are b

10、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the

11、Central Secretariat or to any CENELEC member.Insulating materials based on micaPart 3: Specifications for individual materialsSheet 9: Moulding micanite(IEC 371-3-9:1995 + corrigendum 1995)se de mica tions pour matriaux (CEI 371-3-9:1995 + corrigendum 199Glimmererzeugnisse fr elektrotechnische Zweck

12、e Teil 3: Bestimmungen fr einzelne Materialien Blatt 9: Formmikanit(IEC 371-3-9:1995 + Corrigendum 1995)September 1995 +A1 May 2007riptors: Electrical insulating materials, solid electrical insulating materials, electrical insulating paper,ucts, designation, specifications, composition, compositiona

13、l tolerances, dimensions, dielectric strength, packinEUROPEAN STANDARDNORME EUROPENNEEN 60371-3-9 EN 60371-3-9:1995ForewordThe text of document 15C/476/DIS, future edition 1 of IEC 371-3-9, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC paral

14、lel vote and was approved by CENELEC with its corrigendum August 1995 as EN 60371-3-9 on 1995-07-04.The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC.Foreword to amendment A

15、1The text of document 15/362/FDIS, future amendment 1 to IEC 60371-3-9:1995, prepared by IEC TC 15, Solid electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60371-3-9:1995 on 2007-05-01.The following dates were fixed: End

16、orsement noticeThe text of amendment 1:2007 to the International Standard IEC 60371-3-9:1995 was approved by CENELEC as an amendment to the European Standard without any modification. latest date by which the EN has to be implemented at national level by publication of an identical national standard

17、 or by endorsement (dop) 1996-08-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 1996-08-01 latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-02-01

18、 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2010-05-012 BSI 2007EN 60371-3-9:1995Introduction!This part of IEC 60371 forms part of a series which deals with insulating materials built up from mica splittings or mica paper, with or without re

19、inforcement, and with mica paper in its pure state for use in electrical equipment.IEC 60371 consists of three parts under the main title Insulating materials based on mica:Part 1: Definitions and general requirements Part 2: Methods of test Part 3: Specifications for individual materialsThis standa

20、rd contains one of the sheets comprising Part 3:Sheet 9: Moulding micanite.“1 ScopeThis International Standard specifies the requirements for different types of moulding micanite. They are composed of mica splittings or mica paper, with or without reinforcement, bonded with a suitable binder and may

21、 be supplied as sheets or rolls.Moulding micanites with B-stage resins are of a consistency ranging from rigid to soft. All types are mouldable when heated.This specification covers material having a nominal thickness from 0,10 mm to 7 mm.Materials which conform to this specification meet establishe

22、d levels of performance. However, the selection of a material for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.!Safety warning It is the responsibility of the user of the methods con

23、tained or referred to in this document to ensure that they are used in a safe manner.“2 Normative references!The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of

24、the referenced document (including any amendments) applies. IEC 60243-1:1998, Electrical strength of insulating materials Test methods Part 1: Tests at power IEC 60371-3-2:2005, Insulating materials based on mica Part 3: Specifications for individual materials Sheet 2: Mica paper. IEC 60554-3-2:1983

25、, Specification for cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 2: Capacitor paper. IEC 60674-3-2:1992, Specification for plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 2: Requirements for balanced biaxi

26、ally oriented polyethylene terephthalate (PET) films used for electrical insulation. “3 DesignationMaterial shall be designated as shown in Table 1.4 Requirements: raw materials4.1 Mica splittings!Mica splittings referred to in this specification shall comply with the requirements of IEC 60371-2.“4.

27、2 Mica paperMica paper referred to in this specification shall comply with the requirements of !IEC 60371-3-2.“4.3 Glass fabricThe glass yarn shall be continuous filament glass made from E-glass. The glass fabric shall be in the loom state and have a size content not greater than 3 %.4.4 Polyester f

28、ilmPlastic film used as backing material shall be made from PET and shall comply with the requirements of !IEC 60674-3-2.“4.5 Capacitor paperThe capacitor paper shall comply with the requirements of !IEC 60554-3-2.“4.6 ResinsAny shellac, alkyd, epoxy or silicone resin system may be used which enable

29、s the material to meet the requirements of this specification; other binders may be used, subject to the purchase contract.The resin content shall be subject to purchase contract and the limits of Table 1.5 Requirements: composition and tolerances BSI 2007 3frequencies. IEC 60371-2:2004, Specificati

30、on for insulating materials based on mica Part 2: Methods of test. !When tested by the method of Clause 7 of IEC 60371-2, the composition of the products shall lie within the limits given in Table 1.“EN 60371-3-9:1995Table 1 Designation, composition and tolerances6 Requirements of materials (as rece

31、ived)6.1 GeneralAll materials in any one consignment shall have the same properties, within the limits of this specification, throughout the length of each roll or number of sheets.The surfaces shall be uniform and free from defects such as bubbles, pin-holes, creases and flaws.Material supplied in

32、rolls shall be capable of being unrolled continuously without damage, and the force required to unroll the material shall be substantially uniform.Where interleaving is necessary or required by the purchaser, it shall not have any deleterious effects.6.2 Width, lengthTable 2 Tolerances on width and

33、length6.3 Thickness!The thickness when measured in accordance with 4.1.1 of IEC 60371-2 shall be within the appropriate limits given in Table 3.“For material of nominal thickness greater than 1 mm, the permissible tolerance should be subject to the purchase contract. Type Mica raw materialBinderSurf

34、acing materialNominal thickness rangemmThickness toleranceTypeContent % max.MS1MS2MS3MS4MS5MS6MS7Mica splittings, clear, muscoviteMica splittings, clear, muscoviteMica splittings, spotted, muscoviteMica splittings, clear, muscoviteMica splittings, clear, muscoviteMica splittings, clear, muscoviteMic

35、a splittings, clear, muscoviteShellacShellacShellacShellacShellacAlkydSilicone15252520303030Capacitor paper on both sides0,20 to 2,000,10 to 1,000,10 to 7,000,20 to 2,000,20 to 2,000,20 to 2,000,20 to 2,00According to Table 2MP1MP2MP3MP4MP5Mica paper, muscoviteMica paper, muscoviteMica paper, muscov

36、iteMica paper, muscoviteMica paper, phlogopiteEpoxyEpoxyEpoxySiliconeSilicone2540253030Glass fabric on both sidesPolyester film on both sides0,20 to 1,000,13 to 2,000,20 to 1,000,13 to 1,000,13 to 1,00According to Table 2Width LengthMaster sheetMaster rollCut piece (U 50 mm) 5 % 5 %+50 mm+50 mm+50 m

37、m+0,30 m BSI 20074The width and the length of the material shall not differ by more than the amount shown in Table 2. EN 60371-3-9:1995Table 3 Permissible thickness ranges and tolerances7 Requirements (after curing)When required by the purchase contract, the supplier shall provide evidence that the

38、material meets the requirements of this clause. Curing conditions shall be according to the data given by the manufacturer (curing time, temperature and pressure).7.1 Thermal endurance!This should be carried out in accordance with Clause 21 of IEC 60371-2.“ Both the choice of end-point criterion and

39、 the required temperature index should be subject to purchase contract.NOTE This determination need not be repeated unless the manufacturer has made a significant change in the composition or method of manufacture of the material.7.2 Electrical strength!When tested by the method of Clause 16 of IEC

40、60371-2 with electrodes according to 4.1.1.1 (25/75 mm diameter) of IEC 60243-1, the electrical strength shall meet the requirements of Table 4.“ Table 4 Electric strength8 PackingThe materials should be packaged to ensure adequate protection during transport, handling and storage. Any necessary pac

41、king requirements should be the subject of purchase contract.Each package containing a number of unit packs shall have the following information, clearly and indelibly marked on it:a) description of the material and the number of this specification;b) for material delivered in rolls, the width of th

42、e material and the length per roll;c) for material delivered in sheets, the dimensions of the sheet;d) the number of sheets/rolls in each package;e) the date of manufacture;f) shelf-life and storage conditions.The manufacturers reference number and batch number shall be identified on each package or

43、 roll.TypeNominal thickness rangemmPermissible thicknessPermissible tolerancemmIndividual measurementsmmMS1 to MS70,10,3 0,30,5 0,50,8 0,81,0 0,08 0,12 0,14 0,15 0,12 0,17 0,25 0,35MP1 to MP50,10,3 0,30,5 0,50,8 0,81,0 0,07 0,08 0,10 0,10 0,10 0,12 0,15 0,15Type Electric strengthkV/mm minimumMS1MS2M

44、S3MS4MS5MS6MS781088888MP1MP2MP3MP4MP51010121010 BSI 2007 5EN 60371-3-9:1995Annex ZA (normative) Normative references to international publications with their corresponding European publicationsThe following referenced documents are indispensable for the application of this document. For dated refere

45、nces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.Publication Year Title EN/HD

46、 YearIEC 60243-1 1998 Electrical strength of insulating materials Test methods Part 1: Tests at power frequencies EN 60243-1 1998IEC 60371-2 2004 Specification for insulating materials based on mica Part 2: Methods of test EN 60371-2 2004IEC 60371-3-2 2005 Insulating materials based on mica Part 3:

47、Specifications for individual materials Sheet 2: Mica paper EN 60371-3-2 + corr. November2006 2006IEC 60554-3-2 1983 Specification for cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 2: Capacitor paper IEC 60674-3-2 1992 Specification for plastic films

48、 for electrical purposes - Part 3: Specifications for individual materials Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation EN 60674-3-2 19986 BSI 2007EN 60371-3-9:1996List of referencesSee national foreword. BSI 2007BS EN BS

49、I389 Chiswick High RoadLondonW4 4AL60371-3-9:1996 BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve