BS EN 60401-3-2016 Terms and nomenclature for cores made of magnetically soft ferrites Guidelines on the format of data appearing in manufacturers catalogues of transformer and ind.pdf

1、BSI Standards PublicationTerms and nomenclature for cores made of magneticallysoft ferritesPart 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor coresBS EN 60401-3:2016National forewordThis British Standard is the UK implementation of EN 60401-3:2

2、016. It isidentical to IEC 60401-3:2015. It supersedes BS EN 60401-3:2003 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of organizations represented on this committee can

3、 be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 82415 9ICS 29.100.10Complian

4、ce with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60401-3:2016EUROPEAN S

5、TANDARD NORME EUROPENNE EUROPISCHE NORM EN 60401-3 March 2016 ICS 29.100.10 Supersedes EN 60401-3:2003 English Version Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor core

6、s (IEC 60401-3:2015) Termes et nomenclature pour noyaux en matriaux ferrites magntiquement doux - Partie 3: Lignes directrices relatives aux formats des donnes figurant dans les catalogues des fabricants de noyaux pour transformateurs et inductances (IEC 60401-3:2015) Begriffe und Bezeichnungssystem

7、 fr Kerne aus weichmagnetischen Ferriten - Teil 3: Leitfaden fr das Datenformat fr bertrager- und Spulenkerne in Herstellerkatalogen (IEC 60401-3:2015) This European Standard was approved by CENELEC on 2016-01-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which st

8、ipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Eur

9、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC m

10、embers are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,

11、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Av

12、enue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60401-3:2016 E BS EN 60401-3:2016EN 60401-3:2016 2 European foreword The text of document 51/1106/FDIS, future edition 2 of IEC 60401-3, prepared b

13、y IEC/TC 51 “Magnetic components and ferrite materials“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60401-3:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard

14、 or by endorsement (dop) 2016-10-08 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-01-08 This document supersedes EN 60401-3:2003. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

15、rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60401-3:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the f

16、ollowing notes have to be added for the standards indicated: IEC 60424 Series NOTE Harmonized as EN 60424 Series. IEC 60424-1 NOTE Harmonized as EN 60424-1. IEC 60424-2 NOTE Harmonized as EN 60424-2. IEC 60424-3 NOTE Harmonized as EN 60424-3. IEC 60424-4 NOTE Harmonized as EN 60424-4. IEC 60424-5 NO

17、TE Harmonized as EN 60424-5. IEC 61631 NOTE Harmonized as EN 61631. IEC 62044-1 NOTE Harmonized as EN 62044-1. IEC 62211 NOTE Harmonized as EN 62211. BS EN 60401-3:2016EN 60401-3:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publicat

18、ions The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NO

19、TE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IE

20、C 61332 2005 Soft ferrite material classification EN 61332 2005 IEC 62044-2 - Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level EN 62044-2 - IEC 62044-3 - Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic proper

21、ties at high excitation level EN 62044-3 - BS EN 60401-3:2016 2 IEC 60401-3:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Measuring methods . 6 4 Table of material properties and measuring conditions 6 5 Integrity of value 7 6 Reliability 9 Annex A (inform

22、ative) Breakdown voltage test for insulated ring cores Measurement techniques 11 A.1 Method A 11 A.2 Method B 11 A.2.1 General 11 A.2.2 Method B 1 11 A.2.3 Method B 2 12 A.2.4 Method B 3 12 A.3 Notes on voltage breakdown testing 13 Bibliography 14 Figure A.1 Method A: measurement principle . 11 Figu

23、re A.2 Method B 1: Measurement principle 12 Figure A.3 Method B 2: Measurement principle 12 Figure A.4 Method B 3: Measurement principle 13 Table 1 Rules for property values given in Table 2 . 7 Table 2 Property values and measuring conditions (1 of 2) 8 BS EN 60401-3:2016IEC 60401-3:2015 IEC 2015 3

24、 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ TERMS AND NOMENCLATURE FOR CORES MADE OF MAGNETICALLY SOFT FERRITES Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores FOREWORD 1) The International Electrotechnical Commission (IEC) is a world

25、wide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other ac

26、tivities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subje

27、ct dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions dete

28、rmined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Commi

29、ttees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which

30、 they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publicati

31、on and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not

32、responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technica

33、l committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Pub

34、lications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject o

35、f patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60401-3 has been prepared IEC technical committee 51: Magnetic components and ferrite materials. This second edition cancels and replaces the first edition published in 2003.

36、This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of reliability in Clause 6. BS EN 60401-3:2016 4 IEC 60401-3:2015 IEC 2015 The text of this standard is based on the following documents:

37、 FDIS Report on voting 51/1106/FDIS 51/1121/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 6040

38、1 series, published under the general title Terms and nomenclature for cores made of magnetically soft ferrites, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/w

39、ebstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended.BS EN 60401-3:2016IEC 60401-3:2015 IEC 2015 5 INTRODUCTION For various reasons, a manufacturer may wish to publish in its catalogue

40、 typical data for material parameters as measured on test pieces. It is the object of this part of IEC 60401 to promote the comparability of such information in the area of soft ferrite materials. Except for several specific property limits that should be given separately for each particular core, t

41、he properties described in this standard are material characteristics, intended to facilitate meaningful evaluation of ferrite materials. It should be recognized, however, that there is no direct relation between material characteristics as measured on test pieces and the corresponding parameters me

42、asured on other cores, made of the same material, because of differences in geometry and variation in production processes. Also, the extrapolation of material characteristics to other flux densities and other frequencies will not permit valid comparison of cores of different materials under these n

43、ew conditions of operation. It is therefore emphasized that it is impossible to design and specify a core on the basis of material properties published by a manufacturer in its catalogue, without due contact with that manufacturer. Also, the publication of material characteristics should not be cons

44、idered as a guarantee for core properties; for this purpose, only the specification of that core should be used. It is strongly recommended that, together with the material characteristics, manufacturers publish a note covering the two statements above on the limitations of this kind of information.

45、 This standard further addresses the comparability of various grades of ferrite from different manufacturers by defining the baseline reliability and temperature performance that is inherent for all MnZn ferrite materials, and the limitations that exist when specifying related performance characteri

46、stics in ferrite cores. BS EN 60401-3:2016 6 IEC 60401-3:2015 IEC 2015 TERMS AND NOMENCLATURE FOR CORES MADE OF MAGNETICALLY SOFT FERRITES Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores 1 Scope This part of IEC 60401 gives guidelines

47、for a uniform method of presentation for the properties of magnetically soft ferrite materials and measuring conditions under which they should be determined. It is intended for use in manufacturers catalogues of transformer and inductor cores, in order to aid the comparability of such data. Additio

48、nal guidance is given for users and manufacturers concerning testing and specification of reliability for ferrite cores and for devices using ferrite cores. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its

49、application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61332:2005, Soft ferrite material classification IEC 62044-2, Cores made of soft magnetic materials Measuring methods Part 2: Magnetic properties at low excitation level IEC 62044-3, Cores made of soft magnetic materials Measuring methods Part 3: Magnetic properties at high excitation level 3 Measuring methods The m