BS EN 60454-3-19-2003 Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Tapes made from various backing materd.pdf

1、BRITISH STANDARD BS EN 60454-3-19: 2003 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides The European Standard EN 60454-3-19:2003 has the status

2、 of a British Standard ICS 29.035.20 BS EN 60454-3-19:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 15 August 2003 BSI 15 August 2003 ISBN 0 580 42443 X National foreword This British Standard is the official English language version o

3、f EN 60454-3-19:2003. It is identical with IEC 60454-3-19:2003. The UK participation in its preparation was entrusted by Technical Committee GEL/15, Insulating material, to Subcommittee GEL/15/3, Material specifications, which has the responsibility to: A list of organizations represented on this su

4、bcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using

5、the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from

6、 legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the U

7、K. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDA

8、RD EN 60454-3-19 NORME EUROPENNE EUROPISCHE NORM July 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All ri

9、ghts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60454-3-19:2003 E ICS 29.035.20 English version Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes made from various backing ma

10、terials with pressure-sensitive adhesive on both sides (IEC 60454-3-19:2003) Rubans adhsifs sensibles la pression usages lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 19: Rubans fabriqus partir de diffrents matriaux supports avec un adhsif sensible la pression sur les deux fa

11、ces (CEI 60454-3-19:2003) Selbstklebende Bnder fr elektrotechnische Anwendungen Teil 3: Bestimmungen fr einzelne Materialien Blatt 19: Selbstklebende Bnder aus verschiedenen Trgermaterialien mit beidseitigem Klebstoffauftrag (IEC 60454-3-19:2003) This European Standard was approved by CENELEC on 200

12、3-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

13、obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the

14、Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal

15、, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 15C/1475/FDIS, future edition 1 of IEC 60454-3-19, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60454-3

16、-19 on 2003-07-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 20

17、06-07-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60454-3-19:2003 was approved by CENELEC as a European Standard without any modifi

18、cation. _ Page2 EN60454319:2003 CONTENTS INTRODUCTION.4 1 Scope.5 2 Normative references5 3 Terms and definitions .5 4 Classification and designation.5 5 Requirements.6 6 Test methods6 7 Marking, labelling and packaging 6 Annex ZA (normative) Normative references to international publications with t

19、heir corresponding European publications9 Table 1 Requirements for all types .7 Table 2 Requirements for various types8 Page3 EN60454319:2003 INTRODUCTION This International Standard is one of a series which deals with pressure-sensitive adhesive tapes intended primarily for electrical purposes. The

20、 series consists of three parts: Part 1: General requirements (IEC 60454-1); Part 2: Methods of test (IEC 60454-2); Part 3: Specifications for individual materials (IEC 60454-3). This standard contains one of the sheets comprising Part 3 as follows: Sheet 19: Tapes made from various backing material

21、s with pressure-sensitive adhesive on both sides. Page4 EN60454319:2003 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES Part 3: Specifications for individual materials Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides 1 Scope This standard c

22、ontains the requirements for pressure-sensitive adhesive tapes made with various backing materials with both sides covered with a pressure-sensitive adhesive. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a sp

23、ecific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, onl

24、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60426:1973, Test methods for determining electrolytic corrosion with insulating materials IEC 60454-1:1992, Specifications for pressure-sensitive adhesive tapes

25、for electrical purposes Part 1: General requirements IEC 60454-2:1994, Specification for pressure-sensitive adhesive tapes for electrical purposes Part 2: Methods of test 3 Terms and definitions For the purposes of this document, refer to the definitions applicable to these materials in IEC 60454-1.

26、 4 Classification and designation 4.1 The products supplied according to this standard shall be classified as follows: type 1: products having properties characteristic of a polyester film of nominal thickness (0,20 - 0,30) mm with a temperature index of 130 C and with a rubber thermosetting adhesiv

27、e covering both sides; type 2: products having properties characteristic of a polyester film of nominal thickness (0,10 0,20) mm with a temperature index of 130C and with an acrylic crosslinked adhesive covering both sides; Page5 EN60454319:2003 type 3: products having properties characteristic of a

28、 web made from cotton, regenerated cellulose or a cotton/regenerated cellulose mixture of nominal thickness (0,20 - 0,35) mm with a temperature index of 105 C and with a rubber thermoplastic adhesive covering both sides; type 4: products having properties characteristic of a polyester film of nomina

29、l thickness (0,10 - 0,20) mm with a temperature index of 130 C and with an acrylic thermoplastic adhesive covering both sides. 4.2 The products shall be designated as follows: Type 1: IEC 60454-3-19-1/F-PET/130/R-Tc/2 Type 2: IEC 60454-3-19-2/F-PET/130/A-Tx/2 Type 3: IEC 60454-3-19-3/C-C/105/R-Tp/2

30、Type 4: IEC 60454-3-19-4/F-PET/130/A-Tp/2 5 Requirements 5.1 All applicable requirements of IEC 60454-1 shall apply to material furnished under this specification. 5.2 The physical and electrical properties of products supplied according to this specification shall be within the limits listed in Tab

31、les 1 and 2 when tested in accordance with the test methods listed therein. 5.3 Thermal endurance When required by the purchaser, the manufacturer shall provide evidence that when tested in accordance with Clause 21 of IEC 60454-2 the product has a temperature index of not less than 130 C for types

32、1, 2 and 4; and 105 C for type 3. The exposure temperatures are 150 C, 160 C and 180 C for types 1, 2 and 4; and 120 C, 130 C, and 140 C for type 3. The end-point criteria used shall be as follows: breakdown voltage: 2,2 kV (metal foil electrode) for type 1; breakdown voltage: 2,0 kV (metal foil ele

33、ctrode) for type 2; breakdown voltage: 1,5 kV (metal foil electrode) for type 3; breakdown voltage: 1,8 kV (metal foil electrode) for type 4. 6 Test methods All tests shall be conducted without release liner, in accordance with the appropriate clauses and subclauses of IEC 60454-2. 7 Marking, labell

34、ing and packaging Unless otherwise specified, all marking, labelling and packaging shall be in accordance with the requirements of IEC 60454-1. Page6 EN60454319:2003 Table 1 Requirements for all types Properties IEC 60454-2 Clause or subclause Units Requirements Thickness (without release liner) 4 m

35、m Nominal value per manufacturer, 0,02 mm or 15 %, whichever is greater Width 5 mm 7.2.1 of IEC 60454-1 Length 6 m 7.3 of IEC 60454-1 Electrolytic corrosion - insulation resistance after 24 h at (232) C and (932) % relative humidity; or -visual 7.5 7.6 /25 mm widthNone 1 10 11minimum Grade shall not

36、 be worse than A 1,4 (see Table 1 of IEC 60426) Thermal endurance 21 See 5.3 Page7 EN60454319:2003 Table 2 Requirements for various types Properties Clause or subclause of IEC 60454-2 Units Type 1 Type 2 Type 3 Type 4 Elongation at break 8 % 40 min. 45 min. 8 min. 45 min. Tensile strength 8 N/10 mm

37、width 35 min. 20 min. 45 min. 20 min. Adhesion to steel 11 N/10 mm width 2,0 min. each side 2,0 min. each side 1,5 min. each side 1,8 min. each side Bond separation during thermal treatment 14.1 except use 1 000 g mass, temperature 23 C and bond separation requirement of greater than 1 000 min - - 3

38、 passes - Breakdown voltage - at room temperature - after humid conditioning 17 18 kV kV 4,0 min. 4,0 min. 2,5 min. 2,5 min. 2,0 min. 2,0 min. 3,5 min. 3,0 min. Page8 EN60454319:2003 Annex ZA (normative) Normative references to international publications with their corresponding European publication

39、s This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these p

40、ublications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (

41、mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60426 1973 Test methods for determining electrolytic corrosion with insulating materials - - IEC 60454-1 1992 Specifications for pressure-sensitive adhesive tapes for electrical purposes Part 1: General requirements EN 60454-1 1

42、994 IEC 60454-2 1994 Part 2: Methods of test EN 60454-2 1995 Page9 EN60454319:2003BS EN 60454-3-19:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in

43、 Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our

44、products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 74

45、00. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996

46、 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise reque

47、sted. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and service

48、s. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bs