BS EN 60512-11-1-1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Climatic tests - Test 11a - Climatic sequence《电气设备的机电.pdf

1、BRITISH STANDARD BS EN 60512-11-1: 1999 IEC 60512-11-1: 1995 Electromechanical components for electronic equipment Basic testing procedures and measuring methods Part 11: Climatic tests Section 1: Test 11a Climatic sequence The European Standard EN60512-11-1:1999has the status of a British Standard

2、ICS 31.220.01BSEN60512-11-1:1999 This British Standard, having been prepared under the directionof the Electrotechnical Sector Committee, was publishedunder the authority ofthe Standards Committee andcomes into effect on 15April1999 BSI 02-2000 ISBN 0 580 32149 5 National foreword This British Stand

3、ard is the English language version of EN60512-11-1:1999. It is identical with IEC60512-11-1:1995. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment

4、, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgat

5、e them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number60000added to the old number. For instance, IEC27-1has been renumbered as IEC60027-1. For a period of time during the chang

6、e over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their corresponding Euro

7、pean publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A Br

8、itish Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fr

9、ont cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments i

10、ssued since publication Amd. No. Date CommentsBSEN60512-11-1:1999 BSI 02-2000 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 60512-11-1 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60512-11-1 January 1999 ICS 31.220.01 Descriptors: Electromechanical compo

11、nents, electronic equipment, measuring methods, climatic tests, climatic sequence English version Electromechanical components for electronic equipment Basic testing procedures and measuring methods Part 11: Climatic tests Section 1: Test 11a Climatic sequence (IEC 60512-11-1:1995) Composants lectro

12、mcaniques pour quipements lectroniques Procdures dessai de base et mthodes de mesure Partie11: Essais climatiques Section 1: Essai 11a Squence climatique (CEI 60512-11-1:1995) Elektrisch-mechanishe Bauelemente fr elektronische Einrichtungen Me- und Prfverfahren Teil 11: Klimatische Prfungen Hauptabs

13、chnitt 1: Prfung 11a Klimafolge (IEC 60512-11-1:1995) This European Standard was approved by CENELEC on 1999-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without

14、 any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language

15、made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germ

16、any, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secr

17、etariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-11-1:1999 EEN60512-11-1:1999 BSI 02-2000 2 Foreword The text of the International Standard IEC60512-11-1:1995, prepared by SC48B

18、, Connectors, of IEC TC48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the formalvote and was approved by CENELEC as EN60512-11-1 on1999-01-01 without any modification. The following dates were fixed: This standard is to be used in conjunction wi

19、th EN60512-1:1994. Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC60512-11-1:1995was approved by CENELEC as a European Standard without any

20、modification. Contents Page Foreword 2 1 Scope and object 3 2 Normative references 3 3 Preparation of the specimen 3 4 Test method 3 5 Details to be specified 4 Annex ZA (normative) Normative references to international publicationswiththeir corresponding European publications Inside back cover late

21、st date by which the EN has to be implementedat national level by publication of an identical national standard or by endorsement (dop) 2000-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2000-01-01EN60512-11-1:1999 BSI 02-2000 3 1 Scope and obje

22、ct This section of IEC512-11defines a standard test method to assess the ability of a component to function in a specified manner, in a specified environment which might be encountered during normal use, including storage. NOTEThis series of documents is in the process of being revised; the future n

23、umbering is given in brackets. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this section of IEC512-11. At the time of publication, the editions indicated were valid. All normative documents are subject to

24、revision, and parties to agreements based on this section of IEC512-11are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 68-2-61:1991,

25、 Environmental testing Part 2: Tests Test Z/ABDM: Climatic sequence. IEC 512-2:1985, Electromechanical components for electronic equipment; basic testing procedures and measuring methods Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage str

26、ess tests. IEC 512-7:1993, Electromechanical components for electronic equipment; basic testing procedures and measuring methods Part 7: Mechanical operating tests and sealing tests. IEC 512-9:1992, Electromechanical components for electronic equipment; basic testing procedures and measuring methods

27、 Part 9: Miscellaneous tests. 3 Preparation of the specimen 3.1 Mechanical preparation The specimen, equipped with any accessories normally supplied with the component, shall be mounted and wired in accordance with the detail specification (if appropriate). When required by the detail specification,

28、 the specimen shall be operated the number of times specified prior to test. For each test carried out, the detail specification shall specify the condition of the component, for example operated or non-operated, mated or unmated. 3.2 Preconditioning The duration of the preconditioning shall be at l

29、east1h. 4 Test method 4.1 Initial measurements Initial measurements shall be carried out in accordance with the detail specification. 4.2 Conditioning The test sequence shall be carried out according to IEC68-2-61, Test Z/ABDM: Climatic sequence, Method1. Severity and intermediate measurements for t

30、he different steps shall be carried out as specified by the detail specification. Dry heat The upper climate category temperature shall be applied. If specified in the detail specification, at the end of this step and while still at high temperature, the insulation resistance shall be measured using

31、 test3a of IEC512-2. Cold The lower climate category temperature shall be applied. Low air pressure (optional) When prescribed by the detail specification, the following severity shall be applied. The low pressure shall be defined in the detail specification. The duration of the test shall be5min. A

32、t the end of this test, and while still under low pressure, a voltage proof test shall be applied using test4a of IEC512-2. Damp heat, remaining cycle(s) Remaining cycle(s) shall be specified in the detail specification. 4.3 Final measurements The specimen shall then be subjected to the following te

33、sts as described in the different parts of IEC512and shall meet the requirements specified by the detail specification: a) insulation resistance (test 3a) future standard IEC 512-3-1; b) voltage proof (test 4a) future standard IEC512-4-1;EN60512-11-1:1999 4 BSI 02-2000 c) contact resistance test, as

34、 specified in the detailspecification (test 2) future standard IEC512-2-1 or IEC 512-2-2; d) mechanical operating tests (test 13), as applicable future standard IEC 512-13-1 or IEC512-13-2; e) cable clamping test (test 17), as applicable future standard IEC 512-17-1 or IEC 512-17-4; f) visual examin

35、ation (test 1a), as applicable future standard IEC 512-1-1. 5 Details to be specified When this test is required by the detail specification, the following details shall be specified: a) method of mounting and wiring the specimen, and operated condition of the component(s), if applicable; b) initial

36、 measurements; c) severity of each step of the climatic sequence; d) minimum value of insulation resistance at high temperature; e) when low air pressure test is applicable, the test voltage; f) when contact resistance test is applicable, test to be used; g) requirements for final measurements; h) a

37、ny deviation from the standard test method.EN60512-11-1:1999 BSI 02-2000 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These

38、 normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated

39、 references the latest edition of the publication referred to applies (including amendments). NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-61 1991 Environmental testing P

40、art 2: Test methods Test Z/ABDM: Climaticsequence EN 60068-2-61 1993 IEC 60512-2 1985 Electromechanical components for electronicequipment Basic testing proceduresand measuring methods Part 2: General examination, electrical continuityand contact resistance tests, insulationtests and voltage stress

41、tests IEC 60512-7 1993 Part 7: Mechanical operating tests and sealingtests IEC 60512-9 1992 Part 9:Miscellaneous tests BS EN 60512-11-1: 1999 IEC 60512-11-1: 1995 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing Br

42、itishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is t

43、he constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cov

44、er. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Cust

45、omer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information o

46、n national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subs

47、cribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publicatio

48、ns. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photoc

49、opying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from