BS EN 60512-11-7-2003 Connectors for electronic equipment - Tests and measurements - Flowing mixed gas corrosion test《电子设备用连接器 试验和测量 流动混合气体腐蚀试验》.pdf

1、BRITISH STANDARD BS EN 60512-11-7: 2003 Connectors for electronic equipment Tests and measurements Part 11-7: Climatic tests Test 11g: Flowing mixed gas corrosion test The European Standard EN 60512-11-7:2003 has the status of a British Standard ICS 31.220.10 BS EN 60512-11-7:2003 This British Stand

2、ard was published under the authority of the Standards Policy and Strategy Committee on 25 September 2003 BSI 25 September 2003 ISBN 0 580 42670 X National foreword This British Standard is the official English language version of EN 60512-11-7:2003. It is identical with IEC 60512-11-7:2003. It supe

3、rsedes BS EN 60512-11-7:1997 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment, to Subcommittee EPL/48/2, Connectors, which has the responsibility to: A list of orga

4、nizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Cor

5、respondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does no

6、t of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developme

7、nts and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued

8、 since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60512-11-7 NORME EUROPENNE EUROPISCHE NORM September 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat

9、: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-11-7:2003 E ICS 31.220.10 Supersedes EN 60512-11-7:1996English version Connectors for electronic equipment - Tests and measurements

10、 Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003) Connecteurs pour quipements lectroniques - Essais et mesures Partie 11-7: Essais climatiques - Essai 11g: Essai de corrosion dans un flux de mlange de gaz (CEI 60512-11-7:2003) Steckverbinder fr elektronis

11、che Einrichtungen - Mess- und Prfverfahren Teil 11-7: Klimatische Prfungen - Prfung 11g: Korrosionsprfung mit strmendendem Mischgas (IEC 60512-11-7:2003) This European Standard was approved by CENELEC on 2003-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

12、stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European St

13、andard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the nat

14、ional electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EN 61502-11-72:300 - - 2 Foreword

15、The text of document 48B/1326/FDIS, future edition 2 of IEC 60512-11-7, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-11-7 on 2003-0

16、9-01. This standard is to be used in conjunction with EN 60512-1:2001. This European Standard supersedes EN 60512-11-7:1996. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 20

17、04-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-09-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the In

18、ternational Standard IEC 60512-11-7:2003 was approved by CENELEC as a European Standard without any modification. _ Page2 EN60512117:2003065-2111-7 I EC:2003 3 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 11-7: Climatic tests Test 11g: Flowing mixed gas corrosion test 1 Scope and

19、object This part of IEC 60512 defines a standard test method, Test 11g, to assess the effects of a controlled atmosphere polluted by gases at very low concentration on electrical contacts or connections. 2 Normative references The following referenced documents are indispensable for the application

20、of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-60:1995, Environmental testing Part 2: Tests Test Ke: Flowing mixed gas corrosion test IEC 60512-1-1:2002, Con

21、nectors for electronic equipment Tests and measurements Part 1-1: General examination Test 1a: Visual examination IEC 60512-2-1:2002, Connectors for electronic equipment Tests and measurements Part 2-1: Electrical continuity and contact resistance tests Test 2a: Contact resistance Millivolt level me

22、thod IEC 60512-2-2, Connectors for electronic equipment Tests and measurements Part 2-2: Electrical continuity and contact resistance tests Test 2b: Contact resistance Specified test current method IEC 60512-13-1:1996, Electromechanical components for electronic equipment Basic testing procedures an

23、d measuring methods Part 13: Mechanical operating tests Section 1: Test 13a: Engaging and separating forces 3 Preparation 3.1 Preparation of specimen The specimen, equipped with normal accessories, shall be mounted and wired in accordance with the detail specification. When required by the detail sp

24、ecification, the specimen shall be operated the number of times specified, prior to test. For each test carried out, the detail specification shall specify the condition of the component, for example, mated or unmated. 3.2 Conditioning Conditioning prior to the test shall be carried out in accordanc

25、e with the requirements of the detail specification. Page3 EN60512117:2003065-2111-7 I EC:2003 4 4 Method 4.1 Initial measurement When required by the detail specification, the specified initial measurements shall be made under standard atmospheric conditions, immediately after conditioning. 4.2 Pro

26、cedure The Test 11g method and duration shall be specified in the detail specification. The test severity is defined by the test method, chosen from Table 1, this table is in accordance with Test Ke of IEC 60068-2-60; the test duration, preferred values are 4, 7, 10, 14 and 21 days. Guides for the s

27、election of test methods and test duration, and descriptions of test apparatus are given in IEC 60068-2-60. During the test, specimens are not electrically loaded. Table 1 Test severities Parameters Method 1 Method 2 Method 3 Method 4 H 2 S (10 9vol/vol) 100 20 10 5 100 20 10 5 NO 2(10 9vol/vol) 200

28、 50 200 50 200 50 Cl 2(10 9vol/vol) 10 5 20 5 10 5 SO 2(10 9vol/vol) 500 100 200 20 Temperature C 25 1 30 1 30 1 25 1 Relative humidity % 75 3 70 3 75 3 75 3 Volume changes per hour 3-10 3-10 3-10 3-10 Weight increase of copper coupons mg/dm 2 /day 1,0-2,0 0,3-1,0 1,2-2,2 1,2-2,4 Care should be take

29、n on any possible poisonous effect of gases used. 4.3 Final measurement The specimen shall then be subjected to the following tests and shall meet the requirements specified by the detail specification: a) contact resistance tests according to IEC 60512-2-1 or IEC 60512-2-2, as applicable; b) mechan

30、ical operating tests according to IEC 60512-13-1 as applicable; c) visual examination according to IEC 60512-1-1. Page4 EN60512117:2003065-2111-7 I EC:2003 5 5 Details to be specified When this Test 11g is required by the detail specification, the following details shall be specified: a) method of m

31、ounting and wiring of the specimen; b) mated or unmated condition; c) conditioning time and number of operations prior to the commencement of the test; d) method to be used; e) duration of test; f) initial measurements; g) contact resistance test to be used; h) mechanical operating test to be used;

32、i) requirements for the final measurements; j) any deviation from the standard test method. _ Page5 EN60512117:2003 - - 3 EN 61502-11-72:300 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by d

33、ated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standar

34、d only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publicat

35、ion Year Title EN/HD Year IEC 60068-2-60 1995 Environmental testing Part 2: Tests - Test Ke: Flowing mixed gas corrosion test EN 60068-2-60 1996 IEC 60512-1-1 2002 Connectors for electronic equipment - Tests and measurements Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 20

36、02 IEC 60512-2-1 2002 Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method EN 60512-2-1 2002 IEC 60512-2-2 - 1)Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method EN

37、60512-2-2 2003 2)IEC 60512-13-1 1996 Part 13: Mechanical operating tests - Section 1: Test 13a: Engaging and separating forces EN 60512-13-1 1997 1)Undated reference. 2)Valid edition at date of issue. Page6 EN60512117:2003blankBS EN 60512-11-7: 2003 BSI 389 Chiswick High Road London W4 4AL BSI Briti

38、sh Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of Br

39、itish Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of t

40、he technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. B

41、uying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for interna

42、tional standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Tech

43、nical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date wit

44、h standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standard

45、s via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodie

46、s. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free u

47、se, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.