BS EN 60512-16-11-2008 Connectors for electronic equipment Tests and measurements Mechanical tests on contacts and terminations Test 16k Stripping force solderless wrapped connecti.pdf

1、BRITISH STANDARDBS EN 60512-16-11: 2008Connectors for electronic equipment Tests and measurements Part 16-11: Mechanical tests on contacts and terminations Test 16k: Stripping force, solderless wrapped connectionsICS 31.220.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53

2、g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 60512-16-11:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 August 2008 BSI 2008ISBN 978 0 580 55917 4N

3、ational forewordThis British Standard is the UK implementation of EN 60512-16-11:2008. It is identical to IEC 60512-16-11:2008. The UK participation in its preparation was entrusted to Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment.A list

4、of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal o

5、bligations.Amendments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARD EN 60512-16-11 NORME EUROPENNE EUROPISCHE NORM July 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische No

6、rmung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-16-11:2008 E ICS 31.220.10 English version Connectors for electronic equipment - Tests and measurements -

7、Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections (IEC 60512-16-11:2008) Connecteurs pour quipements lectroniques - Essais et mesures - Partie 16-11: Essais mcaniques des contacts et des sorties - Essai 16k: Force darrachement, conn

8、exions enroules sans soudure (CEI 60512-16-11:2008) Steckverbinder fr elektronische Einrichtungen - Mess- und Prfverfahren - Teil 16-11: Mechanische Prfungen an Kontakten und Anschlssen - Prfung 16k: Abzugskraft, Wickelverbindungen (IEC 60512-16-11:2008) This European Standard was approved by CENELE

9、C on 2008-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

10、 may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

11、 to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

12、uxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 48B/1873/FDIS, future edition 1 of IEC 60512-16-11, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components an

13、d mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-16-11 on 2008-06-01. This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the structure of the EN 60512 series. The followi

14、ng dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-06-01 Annex ZA has been add

15、ed by CENELEC. _ Endorsement notice The text of the International Standard IEC 60512-16-11:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 60512-16-11:2008 2 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 16-11: Mechanical tests on contacts and

16、terminations Test 16k: Stripping force, solderless wrapped connections 1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing electomechanical components within the scope of technical committee 48. It may also be used for similar devices when specif

17、ied in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to determine ability of a component to resist forces that might strip a wrapped connection from its post along the axis of the post. Such wrapped connections are described in IEC 60352-1. NOTE Thi

18、s test is considered as destructive to specimens used. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

19、ing any amendments) applies. IEC 60352-1, Solderless connections Part 1: Wrapped connections General requirements, test methods and practical guidance IEC 60512-1-1, Connectors for electronic equipment Tests and measurements Part 1-1: General examination Test 1a: Visual examination 3 Preparations 3.

20、1 Preparation of specimen The specimen shall consist of a wrap post with a wrapped connection as described in the detail specification. The wrap post may be cut off from a component. Any pre-conditioning of the samples required by the applicable detail specification shall be applied. 3.2 Equipment A

21、 holding device and stripping tool, such as those shown in Figure 1 shall be provided. Clearance shall exist between the post and the test fork. The total clearance shall not exceed 50 % of the diameter of the wrapping wire. Figure 1 also gives an example of sample mounting. BS EN 60512-16-11:2008 3

22、 1 23456 7 F IEC 746/08 Key F force and direction 1 stripping tool 2 wrapped connection 3 connection lead 4 fork jaws 5 holding device 6 wrap post 7 forked hook Figure 1 Example of test equipment BS EN 60512-16-11:2008 4 4 Test method 4.1 Procedure A stripping force shall be applied to the wrapped c

23、onnection so as to move the whole connection along the axis of the wrap post. The movable part of the test device shall travel steadily, at a speed between 25 mm/min to 50 mm/min. The test shall continue until the whole wrapped connection has moved along the axis of the post for a distance of approx

24、imately equal to one diameter of the wrapping wire. 4.2 Measurements and requirements 4.2.1 Before testing Visual examination according to IEC 60512-1-1 shall be carried out. There shall be no defects, nor any features, or other items, which would impair the validity of the test. 4.2.2 During testin

25、g The peak force required to achieve the specified movement of the wrapped connection shall be recorded. It shall not be less than that given in the detail specification. The rate at which the stripping force was applied shall be recorded. 5 Details to be specified When this test is required by the

26、detail specification, the following details shall be specified: a) whether preconditioning is required; b) details of the specimen; NOTE Geometrical, metallurgical and surface finish details of the post and wire as well as tooling and application details, are considered essential c) number of specim

27、ens to be tested; d) the minimum allowable peak force required to achieve the specified movement; e) any deviation from the standard test method. _ BS EN 60512-16-11:2008 5 Annex ZA(normative) Normative references to international publications with their corresponding European publications The follo

28、wing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified b

29、y common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60352-1 -1)Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance EN 60352-1 19972)IEC 60512-1-1 -1)Connectors for electronic equipm

30、ent - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 20022)1)Undated reference. 2)Valid edition at date of issue. BS EN 60512-16-11:2008 6 blankBS EN 60512-16-11: 2008BSI Group Headquarters389 Chiswick High Road,London W4 4AL, UKTel +44 (0)20 8996 9

31、001Fax +44 (0)20 8996 Standards Institution (BSI)BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment o

32、r revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inf

33、orm the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editi

34、ons of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: You may also buy directly using a debit/credit card from the BSI Shop on the Website http:/ respons

35、e to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its

36、 Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to

37、 date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via Bri

38、tish Standards Online can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Co

39、pyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing t

40、he standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070 Email: