BS EN 60512-16-17-2008 Connectors for electronic equipment - Tests and measurements - Part 16-17 Mechanical tests on contacts and nterminations – Test 16q Tensile and ncompressive .pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Connectors forelectronic equipment Tests and measurements Part 16-17: Mechanical tests on contacts andtermination

2、s Test 16q: Tensile andcompressive strength, fixed male tabsBS EN 60512-16-17:2008NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LALicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK i

3、mplementation of EN 60512-16-17:2008.It is identical to IEC 60512-16-17:2008.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/48, Electromechanical components and mechanical structures for electronic equipment.A list of organizations represented on this committee can b

4、e obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 55921 1ICS 31.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.

5、This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60512-16-17:200831 January 2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontr

6、olled Copy, (c) BSIEUROPEAN STANDARD EN 60512-16-17 NORME EUROPENNE EUROPISCHE NORM September 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35,

7、 B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-16-17:2008 E ICS 31.220.10 English version Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and t

8、erminations - Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008) Connecteurs pour quipements lectroniques - Essais et mesures - Partie 16-17: Essais mcaniques des contacts et des sorties - Essai 16q: Rsistance la traction et la compression des languettes fixes (CEI 60

9、512-16-17:2008) Steckverbinder fr elektronische Einrichtungen - Mess- und Prfverfahren - Teil 16-17: Mechanische Prfungen an Kontakten und Anschlssen - Prfung 16q: Zug- und Druckfestigkeit von Flachsteckern (IEC 60512-16-17:2008) This European Standard was approved by CENELEC on 2008-08-01. CENELEC

10、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli

11、cation to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretari

12、at has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Net

13、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60512-16-17:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSIEN 60512-16-17:2008 - 2 - Foreword The text of document 48B/189

14、1/FDIS, future edition 1 of IEC 60512-16-17, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-16-17 on 2008-08-01. This standard is to

15、be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the structure of the EN 60512 series. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-05-01 lates

16、t date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60512-16-17:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 6

17、0512-16-17:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSI- 3 - EN 60512-16-17:2008 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are in

18、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicate

19、d by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60512-1-1 - 1)Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 2002 2)1)Undated reference. 2)Valid edition at date of issue. BS EN 6051

20、2-16-17:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSI 4 60512-16-17 IEC:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 16-17: Mechanical tests on contacts and terminations Test 16q: Tensile and compressive strength, fixe

21、d male tabs 1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing electomechanical components within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of I

22、EC 60512 is to detail a standard test method to determine the ability of a fixed male tab and its fixing to withstand specified tensile and compressive forces. If so specified in the detail specification, forces other than tension and compression may be applied. 2 Normative references The following

23、referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60512-1-1, Connectors for electronic equipment Tests and me

24、asurements Part 1-1: General examination Test 1a: Visual examination 3 Preparations 3.1 Preparation of specimen The specimens shall consist of a connector fitted with one or more male tabs. They may be wired if so specified in the detail specification. Any preconditioning given in the detail specifi

25、cation shall be applied. Three such specimens shall be provided. 3.2 Equipment For the application of the axial loads, a suitable device able to provide the controls on the loads (intensity, rate of increase, time of constant load application) shall be required (e.g.: a universal materials testing m

26、achine). NOTE If the detail specification requires special preconditioning of the specimen, all the necessary equipment detailed in the relevant documents describing such conditioning would also be required. An illustration of the application of force is given in Figure 1. 3.3 Mounting If mounting o

27、f the specimen is appropriate, it shall be as specified in the component detail specification. BS EN 60512-16-17:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSI60512-16-17 IEC:2008 5 L 0,8L FtDpScIEC 1009/08 Figure 1a) Tensile Sc FcDpIEC 1010/0

28、8 Figure 1b) Compression Key L Length of the contact under test, tip to component surface Ft,cTensile and compressive forces, Ft,cDptPermanent Displacement of the tip of the specimen (tab) ScSurface of the component Figure 1 Application of the tensile and compressive forces BS EN 60512-16-17:2008Lic

29、ensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSI 6 60512-16-17 IEC:2008 4 Test method 4.1 General At least 10 tabs shall be selected at random from the 3 specimens of which at least one tab shall be near the periphery, and one, at or near the centre of

30、 the connector insert or housing. For inserts or housings having 3 or less tabs, all tabs shall be tested. This shall be repeated, on an adjacent (new) tab, with the force being applied in the opposite direction (i.e. if tensile is first applied then compression is the next test). A tensile or compr

31、essive force F shall be applied to the fixed tab. The tensile or compressive force shall be steadily increased from zero to that specified in the component specification. This tensile or compressive force shall be maintained for 1 minute. The tensile or compressive force shall then be removed, and t

32、he (permanent) displacement of the tab shall be measured after the removal of the tensile or compressive force. Permanent displacement is defined as the difference between the initial position of the tab before application of any tensile or compressive forces and its position after all tensile and c

33、ompressive force is removed. 4.2 Measurements and requirements 4.2.1 Before testing Visual examination according to IEC 60512-1-1 shall be carried out. There shall be no defects, which would impair the validity of the test. 4.2.2 During testing The displacement and permanent displacement of the comp

34、onent, measured at the plane of application of the tensile and compressive forces shall be measured. NOTE In the case of a tab being made from a highly resilient material (e.g. spring steel or beryllium copper) the displacement may be large whilst the permanent displacement is negligible. In the cas

35、e of a tab being held in a plastic material, recovery of deformation of that material may take place over a period. Furthermore, as the properties of such plastic materials may vary considerably with temperature, these tests will normally be done at laboratory temperatures (NTP), and any deviation f

36、rom this should be given in the relevant detail specification. The permanent displacement shall not exceed any value given in the detail specification. 4.2.3 After testing Visual examination according to IEC 60512-1-1 shall be carried out. There shall be no defects that would impair the normal funct

37、ioning of the connector. This shall be judged by a mating test with its counterpart. If there is any damage to the specimen caused by the jaws of a testing machine, this shall not be considered as a defect. BS EN 60512-16-17:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38

38、, Uncontrolled Copy, (c) BSI60512-16-17 IEC:2008 7 5 Details to be specified When this test is required by a detail specification, the following shall be given therein: a) whether preconditioning is required; b) whether the specimen is to be wired, and if so, details of this; c) whether special moun

39、ting of the specimen is required; d) tensile and compressive forces to be applied and orientation with respect to the tab; e) allowable permanent displacement; f) number of specimens to be tested, if other than 3; g) any deviation from the standard test method. _ BS EN 60512-16-17:2008Licensed Copy:

40、 Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDA

41、RDS, 26/05/2009 07:38, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards w

42、orldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the q

43、uality of our products andservices. We would be grateful if anyone finding an inaccuracy orambiguity while using this British Standard would inform the Secretary ofthe technical committee responsible, the identity of which can be foundon the inside front cover.Tel: +44 (0)20 8996 9000 Fax: +44 (0)20

44、 8996 7400BSI offers members an individual updating service called PLUS whichensures that subscribers automatically receive the latest editions ofstandards.Buying standardsOrders for all BSI, international and foreign standards publicationsshould be addressed to BSI Customer Services.Tel: +44 (0)20

45、8996 9001 Fax: +44 (0)20 8996 7001Email: You may also buy directly using a debit/credit card from the BSI Shopon the website response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise reque

46、sted.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library.Various BSI electronic information services are also available which givedetails on all its products and services. Contact the Information Centre. Tel: +44 (0)20

47、 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact MembershipAdministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20

48、8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of thepublications of the international standardization bodies. Except as permitted under theCopyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrievalsystem or transmitted in any form or by any means electronic, photocopying, recording orotherwise without prior written permission from BSI. This