BS EN 60512-22-1-2010 Connectors for electronic nequipment Tests and nmeasurements nPart 22-1 Capacitance tests Test 22a nCapacitance《电子设备连接器 试验和测量 第22-1部分 电容试验 试验22a 电容》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 60512-22-1:2010Connectors for electronicequipment Tests andmeasurementsPart 22-1: Capacitance tests Test 22a:Capacitance (IEC 60512-22-1:2010)BS EN 60512-22-1:2010 BRITISH

2、STANDARDNational forewordThis British Standard is the UK implementation of EN60512-22-1:2010. It is identical to IEC 60512-22-1:2010. It supersedesTest 22a from BS 5772-9:1993, IEC 60512-9:1992, which will remaincurrent until all the tests it contains have been revised.The UK participation in its pr

3、eparation was entrusted to TechnicalCommittee EPL/48, Electromechanical components and mechanicalstructures for electronic equipment.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisio

4、ns of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 62173 4ICS 31.220.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 A

5、ugust 2010.Amendments issued since publicationDate Text affectedBS EN 60512-22-1:2010EUROPEAN STANDARD EN 60512-22-1 NORME EUROPENNE EUROPISCHE NORM July 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektr

6、otechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-22-1:2010 E ICS 31.220.01 English version Connectors for electronic equipment - Tests and measur

7、ements - Part 22-1: Capacitance tests - Test 22a: Capacitance (IEC 60512-22-1:2010) Connecteurs pour quipements lectroniques - Essais et mesures - Partie 22-1: Essais de capacit - Essai 22a: Capacit (CEI 60512-22-1:2010) Steckverbinder fr elektronische Einrichtungen - Mess- und Prfverfahren - Teil 2

8、2-1: Prfungen der Kapazitt - Prfung 22a: Kapazitt (IEC 60512-22-1:2010) This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nationa

9、l standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in a

10、ny other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,

11、the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60512-22-1:2010EN 60512-22-

12、1:2010 - 2 - Foreword The text of document 48B/2158/FDIS, future edition 1 of IEC 60512-22-1, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as E

13、N 60512-22-1 on 2010-07-01. The structure of EN 60512 series is explained in EN 60512-1-100. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent righ

14、ts. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-07-01 _ Endo

15、rsement notice The text of the International Standard IEC 60512-22-1:2010 was approved by CENELEC as a European Standard without any modification. _ BS EN 60512-22-1:2010 2 60512-22-1 IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part

16、 22-1: Capacitance tests Test 22a: Capacitance FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on

17、all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Pub

18、lication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation.

19、IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of

20、opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made

21、to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transpare

22、ntly to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certi

23、fication bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability sha

24、ll attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including leg

25、al fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this pub

26、lication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60512-22-1 has been prepared by subcommittee 48B: Conn

27、ectors, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. This standard cancels and replaces Test 22a of IEC 60512-9, issued in 1992. The structure of IEC 60512 series is explained in IEC 60512-1-100. The text of this standard is based on

28、 the following documents: FDIS Report on voting 48B/2158/FDIS 48B/2192/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. BS EN 60512-22-1:201060512-22-1 IEC:2010 3 This publication has been drafted in accordance wi

29、th the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60512 series, under the general title Connectors for electronic equipment Tests and measurements, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stabili

30、ty date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60512-22-1:2010 4 60512-22-1 IEC:2010 CONNECTORS FOR ELECTRONIC EQUIPMEN

31、T TESTS AND MEASUREMENTS Part 22-1: Capacitance tests Test 22a: Capacitance 1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a det

32、ail specification. The object of this standard is to detail a standard test method to determine the capacitance between conductive elements of connectors. 2 Preparation of the specimen The specimen shall be prepared and mounted according to the detail specification. 3 Test method Any one of the foll

33、owing contact combinations may be measured: a) between one contact and the following parts, all connected to earth at a common point: all other contacts, all metal parts, the mounting plate; b) between any two adjacent contacts, the following parts all being connected to earth at a common point: all

34、 other contacts, all metal parts, the mounting plate; c) any other measuring point or operating condition as specified by the detail specification. The capacitance shall be measured at a frequency as specified by the detail specification, using a suitable test set, for example a capacitance bridge w

35、hich will ensure an accuracy of 5 %. The preferred measuring frequencies are: 1 kHz 200 Hz, 1 MHz 200 kHz. 4 Requirements The values of capacitance shall not exceed the values specified by the detail specification. BS EN 60512-22-1:201060512-22-1 IEC:2010 5 5 Details to be specified When this test i

36、s required by the detail specification, the following details shall be specified: a) preparation of the specimen; b) mounting of the specimen; c) contact combinations to be measured; d) value of the measuring frequency; e) the maximum permitted value(s) of the capacitance(s); f) any deviation from t

37、he standard test method. _ This page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorpo

38、rated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess

39、the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of

40、 which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buy

41、ing standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email

42、: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards th

43、rough its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date wi

44、th standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStan

45、dards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act

46、 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: