BS EN 60598-2-5-2015 Luminaires Particular requirements Floodlights《灯具 专门要求 泛光灯》.pdf

1、BSI Standards PublicationLuminairesPart 2- 5: Particular requirements FloodlightsBS EN 60598-2-5:2015National forewordThis British Standard is the UK implementation of EN 60598-2-5:2015. It isidentical to IEC 60598-2-5:2015. It supersedes BS EN 60598-2-5:1998, whichwill be withdrawn on 10 September

2、2018.The UK participation in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/4, Luminaires.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all

3、the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82907 9ICS 29.140.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stan

4、dard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60598-2-5:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60598-2-5 November 2015 ICS 29.140.40 Supe

5、rsedes EN 60598-2-5:1998 English Version Luminaires - Part 2-5: Particular requirements - Floodlights (IEC 60598-2-5:2015) Luminaires - Partie 2-5: Exigences particulires - Projecteurs (IEC 60598-2-5:2015) Leuchten - Teil 2: Besondere Anforderungen - Hauptabschnitt 5: Scheinwerfer (IEC 60598-2-5:201

6、5) This European Standard was approved by CENELEC on 2015-09-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographic

7、al references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibil

8、ity of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Fo

9、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechn

10、ical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No.

11、 EN 60598-2-5:2015 E BS EN 60598-2-5:2015EN 60598-2-5:2015 2 European foreword The text of document 34D/1172/FDIS, future edition 3 of IEC 60598-2-5, prepared by IEC/SC 34D “Luminaires“ of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC

12、as EN 60598-2-5:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-10 latest date by which the national standards conflicting with the document have to be with

13、drawn (dow) 2018-09-10 This document supersedes EN 60598-2-5:1999 + corr. Dec. 1998. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. T

14、his standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60598-2-5:2015 was approved by CENELEC as a European Standard without any modi

15、fication. BS EN 60598-2-5:2015EN 60598-2-5:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application

16、. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2

17、 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-2-75 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests EN 60068-2-75 - IEC 60598-1 - Luminaires - Part 1: Gene

18、ral requirements and tests EN 60598-1 - IEC 62262 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) EN 62262 - BS EN 60598-2-5:2015 2 IEC 60598-2-5:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 5.1 Scope 6 5.2 Normative refer

19、ences . 6 5.3 Terms and definitions 6 5.4 Classification of Iuminaires 6 5.5 Marking . 7 5.6 Construction 7 5.7 Creepage distances and clearances . 10 5.8 Provision for earthing . 10 5.9 Terminals 10 5.10 External and internal wiring 10 5.11 Protection against electric shock 10 5.12 Endurance tests

20、and thermal tests . 10 5.13 Resistance to dust and moisture 11 5.14 Insulation resistance and electric strength 11 5.15 Resistance to heat, fire and tracking 11 Annex A (informative) Schedule of amended clauses containing more serious/critical requirements which require products to be retested . 12

21、Figure 1 Counting particles at the edge of the square . 9 BS EN 60598-2-5:2015IEC 60598-2-5:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LUMINAIRES Part 2-5: Particular requirements Floodlights FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization

22、 for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC pub

23、lishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may

24、 participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreeme

25、nt between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Pub

26、lications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or

27、 for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corres

28、ponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for a

29、ny services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and

30、IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Att

31、ention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.

32、IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60598-2-5 has been prepared by subcommittee 34D: Luminaires, of IEC technical committee 34: Lamps and related equipment. This third edition cancels and replaces the second edition published in

33、 1998, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: it introduces requirements for the glass breaking test. BS EN 60598-2-5:2015 4 IEC 60598-2-5:2015 IEC 2015 The text of this standard is based on the fo

34、llowing documents: FDIS Report on voting 34D/1172/FDIS 34D/1180/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This standard i

35、s to be read in conjunction with IEC 60598-1: Luminaires Part 1: General requirements and tests. A list of all the parts in the IEC 60598 series, published under the general title Luminaires can be found on the IEC website. NOTE In this standard, the following print types are used: requirements: in

36、roman type; test specifications: in italic type; notes: in small roman type. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At t

37、his date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60598-2-5:2015IEC 60598-2-5:2015 IEC 2015 5 INTRODUCTION The mechanical stress on floodlights is similar to the mechanical stress on luminaires for road and street lighting. Because of this rea

38、son this standard contains an update to align the mechanical and breakage test requirements on flat and curved glass with IEC 60598-2-3. BS EN 60598-2-5:2015 6 IEC 60598-2-5:2015 IEC 2015 LUMINAIRES Part 2-5: Particular requirements Floodlights 5.1 Scope This part of IEC 60598 specifies requirements

39、 for floodlights for use with electrical light sources on supply voltages not exceeding 1 000 V. 5.2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited

40、applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-75, Environmental testing Part 2-75: Tests Test Eh: Hammer tests IEC 60598-1, Luminaires Part 1: General requirements and tests IEC 62262, Degrees of protection provided by

41、enclosures for electrical equipment against external mechanical impacts (IK code) 5.3 Terms and definitions For the purposes of this document , the terms and definitions given in IEC 60598-1, as well as the following apply. 5.3.1 floodlighting lighting of a scene or an object, usually by projectors,

42、 in order to increase considerably its illuminance relative to its surroundings Note 1 to entry: The difference in illumination between the subject and its surroundings may, alternatively, be achieved by colour. 5.3.2 floodlight luminaire for floodlighting Note 1 to entry: A floodlight can be for ei

43、ther exterior or interior use or for both. 5.4 Classification of Iuminaires Luminaires shall be classified in accordance with the provisions of Section 2 of IEC 60598-1. The provisions of Section 0 of IEC 60598-1 apply. The tests described in each appropriate section of Part 1 shall be carried out i

44、n the order listed in this Part 2. BS EN 60598-2-5:2015IEC 60598-2-5:2015 IEC 2015 7 5.5 Marking The provisions of Section 3 of IEC 60598-1 apply. In addition, the following information shall be provided in the instruction leaflet supplied with the luminaire, if applicable: a) operating position, if

45、 not universal; b) weight and overall dimensions of the floodlight; c) maximum projected area of the floodlight;. d) limitation of use indoors and/or outdoor; e) maximum mounting height if 5 m, relevant to the selected method for protection against the falling of glass particles and the number of fi

46、xing devices. 5.6 Construction The provisions of Section 4 of IEC 60598-1 apply together with the requirements of 5.6.1 to 5.6.8. 5.6.1 Floodlights for use outdoors shall have protection against the ingress of moisture at least equivalent to IPX3. 5.6.2 Lampholder brackets and lamp supports where us

47、ed shall withstand normal usage throughout the life of the floodlight. They shall accept and retain lamps which are within the dimensional tolerances stated in the appropriate IEC publication where applicable, and locate the lamp or lamps in the designed relationship to the optical control devices i

48、n the floodlight. 5.6.3 When provision is made for alternative sizes of lamps or light centre positions, the adjusting means shall be positive and firmly retained in the selected position. 5.6.4 Refractors, reflectors or any other light controlling components shall be so marked or constructed that t

49、hey can be fitted or replaced only in the correct relationship to the light source. 5.6.5 The means for attaching the floodlight to its support shall be appropriate to the weight of the floodlight. For floodlights for use above ground level outdoors, the connection shall withstand wind speeds of 150 km/h on the projected surface of the floodlight assembly without undue deflection. Fixings which carry the weight of the floodlight and internal accessories shall be provided with a