BS EN 60669-2-6-2012 Switches for household and similar fixed electrical installations Particular requirements Firemans switches for exterior and interior signs and luminaires《家用和类.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationSwitches for household and similar fixed electrical installationsPart 2-6: Particular requirements Firemans switches for exterior and interior signs and luminairesBS EN 60669-2-6

2、:2012National forewordThis British Standard is the UK implementation of EN 60669-2-6:2012. It was derived from IEC 60669-2-6:2012. It supersedes BS EN 50425:2008, which will be withdrawn on 22 February 2015.The UK participation in its preparation was entrusted to Technical Committee PEL/23, Electric

3、al accessories.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012Published

4、 by BSI Standards Limited 2012 ISBN 978 0 580 68696 2 ICS 29.120.40 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2012.Amendments issued since publica

5、tionAmd. No. Date Text affectedBRITISH STANDARDBS EN 60669-2-6:2012EUROPEAN STANDARD EN 60669-2-6 NORME EUROPENNE EUROPISCHE NORM March 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normun

6、g Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60669-2-6:2012 E ICS 29.120.40 Supersedes EN 50425:2008English version Switches for household and similar fixed electric

7、al installations - Part 2-6: Particular requirements - Firemans switches for exterior and interior signs and luminaires (IEC 60669-2-6:2012, modified) Interrupteurs pour installations lectriques fixes domestiques et analogues - Partie 2-6: Prescriptions particulires - Interrupteurs pompiers pour ens

8、eignes lumineuses et luminaires extrieurs et intrieurs (CEI 60669-2-6:2012, modifie) Schalter fr Haushalt und hnliche ortsfeste elektrische Installationen - Teil 2-6: Besondere Anforderungen - Feuerwehrschalter fr uere und innere Anzeigen und Leuchten (IEC 60669-2-6:2012, modifiziert) This European

9、Standard was approved by CENELEC on 2012-02-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con

10、cerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC

11、member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Gr

12、eece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 60669-2-6:2012EN 60669-2-6:2012 - 2 - Foreword The text of document 23B/990/CDV, futu

13、re edition 1 of IEC 60669-2-6, prepared by SC 23B, “Plugs, socket-outlets and switches“, of IEC TC 23, “Electrical accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60669-2-6:2012. A draft amendment, which covers common modifications to IEC 60669-2-6, was prep

14、ared by CLC/TC 23BX, “D.C. plugs and socket-outlets and switches for household and similar fixed electrical installations“ and approved by CENELEC. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standa

15、rd or by endorsement (dop) 2013-02-22 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-02-22 This document supersedes EN 50425:2008. EN 60669-2-6:2012 is to be used in conjunction with EN 60669-1:1999 + A1:2002 + A2:2008. It lists the changes

16、 necessary to convert that standard into a specific standard for firemans switches. In this publication, the following print types are used: requirements proper: in roman type; test specifications: in italic type; notes: in smaller roman type. Subclauses, figures, tables or notes which are additiona

17、l to those in part 1 are numbered starting from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60669-2-6:2012 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

18、ELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). BS EN 60669-2-6:2012- 3 - EN 60669-2-6:2012 En

19、dorsement notice The text of the International Standard IEC 60669-2-6:2012 was approved by CENELEC as a European Standard with agreed common modifications. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60669-2-4 NOTE Harmonized as EN

20、 60669-2-4. IEC 60364-5-51 NOTE Harmonized as HD 60364-5-51. COMMON MODIFICATIONS 1 Scope Replace the text of NOTE 101 by: NOTE 101 The working voltage for the signs and luminous-discharge-tube installations is higher than 1 kV but lower than 10 kV and these should be in accordance with EN 50107. BS

21、 EN 60669-2-6:2012EN 60669-2-6:2012 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For da

22、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Addition to Anne

23、x ZA of EN 60669-1:1999: Publication Year Title EN/HD Year IEC 60669-1 (mod) + A1 (mod) + A2 (mod) 1998 1999 2006 Switches for household and similar fixed-electrical installations - Part 1: General requirements EN 60669-1 + A1 + A2 1999 2002 2008 IEC 62262 - Degrees of protection provided by enclosu

24、res for electrical equipment against external mechanical impacts (IK code) EN 62262 - BS EN 60669-2-6:2012- 5 - EN 60669-2-6:2012 Annex ZB (normative) Special national conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. clim

25、atic conditions, electrical earthing conditions. NOTE If it affects harmonization, it forms part of the European Standard / Harmonization Document. For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative. Clau

26、se Special national condition Foreword United Kingdom Add an additional paragraph: “Firemans switches which cover applications suited to light industrial units, retail units and petrol station forecourts fall under the scope of EN 60947-3.“ since the scope of EN 60669-1 only covers household and sim

27、ilar fixed electrical installations. 13.108 France The enclosure of the firemans switch and of the actuating handle could be of an other colour than red if it is equipped with an red illuminated indicator according to 13.107. The colours yellow, green and blue are not allowed (according to NF X 08-0

28、03-1). 13.108 Portugal Firemans switches may have colours different from red for the enclosure and different from black for the actuating handle, if they are equipped with a red illuminated indicator, according to 13.107. BS EN 60669-2-6:2012EN 60669-2-6:2012 - 6 - Annex ZC (informative) A-deviation

29、s A-deviation: National deviation due to regulations, the alteration of which is for the time being outside the competence of the CENELEC national member. This European Standard falls under Directive 2006/95/EC. NOTE (from CEN/CENELEC IR Part 2:2011, 2.17) Where standards fall under EU Directives, i

30、t is the view of the Commission of the European Communities (OJ No C 59, 1982-03-09) that the effect of the decision of the Court of Justice in case 815/79 Cremonini/Vrankovich (European Court Reports 1980, p. 3583) is that compliance with A-deviations is no longer mandatory and that the free moveme

31、nt of products complying with such a standard should not be restricted except under the safeguard procedure provided for in the relevant Directive. In the relevant CENELEC countries these A-deviations are valid instead of the provisions of the European Standard/Harmonization Document until they have

32、 been removed. Clause Deviation 1 Italy (Installation Rules) The Italian installation rules may require different protection switching devices in order to comply with the function given in the scope of this standard. The installation practice shall be in accordance with the requirements of the follo

33、wing Italian legislative decrees, applicable to the various types of installations. Decree Title DPR 27/04/55 No. 547 Norme per la prevenzione degli infortuni sul lavoro DPR 09/04/59 No. 128 Norme di polizia delle miniere e delle cave DM 12/01/71 No. 208 Norme di sicurezza per gli impianti di distri

34、buzione stradale di gas di petrolio liquefatto per autotrazione DM 08/03/85 Direttive sulle misure pi urgenti ed essenziali di prevenzione incendi ai fini del rilascio del nullaosta provvisorio di cui alla legge 7 dicembre 1984, n. 818 DM 11/01/88 Norme prevenzioni incendi nelle metropolitane DM 20/

35、05/92 No. 569 Regolamento contenente norme di sicurezza antincendio per gli edifici storici e artistici destinati a musei, gallerie, esposizioni e mostre DM 26/08/92 Norme di prevenzione incendi per ledilizia scolastica DM 09/04/94 Approvazione della regola tecnica di prevenzione incendi per la cost

36、ruzione e lesercizio delle attivit ricettive turistico-alberghiere. DPR 30/06/95 No. 418 Regolamento concernente norme di sicurezza antincendio per gli edifici di interesse storico-artistico destinati a biblioteche ed archivi DM 12/04/96 Approvazione della regola tecnica di prevenzione incendi per l

37、a progettazione, la costruzione e lesercizio degli impianti termici alimentati da combustibili gassosi DM 19/08/96 Approvazione della regola tecnica di prevenzione incendi per la progettazione, costruzione ed esercizio dei locali di intrattenimento e di pubblico spettacolo DM 18/09/02 Approvazione d

38、ella regola tecnica di prevenzione incendi per la progettazione, la costruzione e lesercizio delle strutture sanitarie pubbliche e private DM 28/04/05 Approvazione della regola tecnica di prevenzione incendi per la progettazione, la costruzione e lesercizio degli impianti termici alimentati da combu

39、stibili liquidi DM 18/03/96 DM 16/05/05 Norme di sicurezza per la costruzione e lesercizio degli impianti sportivi DM 22/02/06 Approvazione della regola tecnica di prevenzione incendi per la progettazione, la costruzione e lesercizio di edifici e/o locali destinati ad uffici DM 31/08/06 Approvazione

40、 della regola tecnica di prevenzione incendi per la progettazione, costruzione ed esercizio degli impianti di distribuzione di idrogeno per autototrazione BS EN 60669-2-6:2012- 7 - EN 60669-2-6:2012 1 Portugal (Installation Rules and Safety Code on Fire in Buildings) The Portuguese Electrical Instal

41、lation Rules and the Safety Code on Fire in Buildings also cover firemans switches, for which the applicable requirements must follow the Portuguese legislation. Decree Title Decreto-Lei N 226/2005 Portaria N 949-A/2006 Regras Tcnicas das Instalaes Elctricas de Baixa Tenso Clauses: 64- Explorao das

42、instalaes 536.4 -Dispositivos de corte de emergncia 802- Instalaes de alta tenso alimentadas a partir de instalaes de baixa tenso Decreto-Lei N 220/2008 Portaria N1532/2008 Regulamento Tcnico de Segurana contra Incndio em Edifcios (SCIE) 8.3 United kingdom (UK wiring rules) Building and Buildings, E

43、ngland and Wales - The Building (Amendment) Regulations 2003 Statutory Instrument 2003 No. 2692 which require compliance with UK Wiring Rules BS 7671:2001 (incl. Amendment 2), Clause 537-04-06. The following information shall be distinctly and durably marked on the firemans switch in a position wher

44、e it can be clearly seen from a person standing on the ground at the intended site, without opening the enclosure and when the switch is installed: “ON” and “OFF” positions, in letters not less than 10 mm high; letters reading “FIREMANS SWITCH“ or “FIRE SWITCH” in letters not less than 10 mm high. 1

45、3.101 United kingdom (UK wiring rules) Building and Buildings, England and Wales - The Building (Amendment) Regulations 2003 Statutory Instrument 2003 No. 2692 which require compliance with UK Wiring Rules BS 7671:2001 (incl. Amendment 2), Clause 537-04-06. Once installed, the handle off position sh

46、all be up. NOTE The on position means powered and the off position means unpowered. Compliance is checked by inspection. 13.107 United kingdom (UK wiring rules) Building and Buildings, England and Wales - The Building (Amendment) Regulations 2003 Statutory Instrument 2003 No. 2692 which require comp

47、liance with UK Wiring Rules BS 7671:2001 (incl. Amendment 2), Clause 537-04-06. This subclause does not apply. In the UK, indication must be clearly indicated as required by BS 7671 which means that use of an illuminated indicator is considered unsafe since a false indication will occur if there is

48、a failure of the illumination indicator or circuit. BS EN 60669-2-6:2012EN 60669-2-6:2012 - 8 - 24 France (Regulation of 1980 the 25thof June modified by the Regulation of 2001 the 19thof November) All the tests shall be carried out at a temperature of 850 C. BS EN 60669-2-6:2012 2 60669-2-6 IEC:201

49、2 CONTENTS 1 Scope . 6 2 Normative references . 6 3 Definitions 6 4 General requirements . 7 5 General notes on tests . 7 6 Ratings . 7 7 Classification 7 8 Marking 8 9 Checking of dimensions 8 10 Protection against electric shock 8 11 Provision for earthing . 8 12 Terminals . 8 13 Constructional requirements . 12 14 Mechanism . 14 15 Resistance to ageing, protection provided by enclosures of switches and resistance to humidity . 15 16 Insulation resistance and electric str