1、BRITISH STANDARD BS EN 60679-4-1:1998 IEC 60679-4-1: 1998 Quartz crystal controlled oscillators of assessed quality Part 4-1: Blank detail specification Capability approval The European Standard EN 60679-4-1:1998 has the status of a British Standard ICS 31.140BSEN60679-4-1:1998 This British Standard
2、, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 June 1998 BSI 04-1999 ISBN 0 580 29932 5 National foreword This British Standard is the English language version of EN60679-4-1:1998.
3、It is identical with IEC60679-4-1:1998. It supersedes BSEN169101:1995 which will be withdrawn in due course (see note on page2). The UK participation in its preparation was entrusted to Technical Committee EPL/49, Piezoelectric devices for frequency control and selection, which has the responsibilit
4、y to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of o
5、rganizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number60000 added to the old number. For instance, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering syst
6、em to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British
7、 Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purpor
8、t to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cov
9、er, pages i and ii, theEN title page, pages 2 to 8 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN60
10、679-4-1:1998 BSI 04-1999 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 60679-4-1 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60679-4-1 April 1998 ICS 31.140 Supersedes EN 169101:1993 English version Quartz crystal controlled oscillators of assessed qual
11、ity Part 4-1: Blank detail specification Capability approval (IEC 60679-4-1:1998) Oscillateurs pilots par quartz sous assurance, de la qualit Partie 4-1: Spcification particulire cadre Agrment de savoir-faire (CEI 60679-4-1:1998) Quarzoszillatoren mit bewerteter Qualitt Teil 4-1: Vordruck fr Bauarts
12、pezifikation Befhigungsanerkennung (IEC 60679-4-1:1998) This European Standard was approved by CENELEC on1998-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard withou
13、t any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language
14、 made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Ge
15、rmany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central S
16、ecretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60679-4-1:1998 EEN60679-4-1:1998 BSI 04-1999 2 Foreword The text of document49/388/FDIS, future edition1 of IEC60679-4-1, prepared
17、by IECTC49, Piezoelectric and dielectric devices for frequency control and selection, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN60679-4-1 on1998-04-01. This European Standard supersedes EN169101:1993. The following dates were fixed: NOTEThe latest date of withdr
18、awal will be fixed when all parts of EN60679, which are to replace EN169000 and its related specifications, are approved. This Standard is to be used in conjunction with EN60679-1:1998 and EN60679-4:1998. Endorsement notice The text of the International Standard IEC60679-4-1:1998 was approved by CEN
19、ELEC as a European Standard without any modification. Contents Page Foreword 2 Introduction 3 1 Ratings 4 2 Characteristics 4 3 Marking 4 4 Ordering information 5 5 Certified test records 5 6 Additional information (not for inspection purposes) 5 7 Inspection requirements 5 Annex A (normative) Examp
20、le of a front page layout for customer detail specifications 8 Annex B (normative) Ageing test 8 Table 1 6 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1999-01-01 latest date by which the national standar
21、ds conflicting with the EN haveto be withdrawn (dow) EN60679-4-1:1998 BSI 04-1999 3 Introduction Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for the minimum content of detail specifications. For custom-b
22、uilt quartz crystal controlled oscillators where the detail specification is not intended for publication, a suggested layout for the front page is given in Annex A. This is not mandatory, but it is recommended that the layout be followed whenever possible. Identification of the detail specification
23、 and of the component The numbers between square brackets on the front page correspond to the following information which should be given in the appropriate boxes. 1 The name of the National Standards Organization under whose authority the detail specification is published and, if applicable, the or
24、ganization from whom the detail specification is available. 2 The IECQ number allotted to the detail specification. 3 The number and issue number of the IEC generic or sectional specification, as relevant; also national reference if different. 4 If different from the IEC number, the national number
25、of the detail specification, date of issue and any further information required by the national system, together with any amendment numbers. 5 A brief description of the quartz crystal controlled oscillator, or range of oscillators (for example, SPXO and output frequency). 6 Information on typical c
26、onstruction, where applicable (for example, resistance-welded or cold-welded). For 5 and 6 the text to be given in the detail specification should be suitable for an entry in IECQC001005 and IECQC001004. 7 An outline drawing with the main dimensions which are of importance for interchangeability, as
27、 demanded in IEC60679-3, and/or reference to the appropriate national or international document for outlines. Alternatively, this drawing may be given in an annex to the detail specification. Specification available from: 1 IECQ Edition Date Page 1 of QC 690101 2 ELECTRONIC COMPONENTS OF ASSESSED QU
28、ALITY BY CAPABILITY APPROVAL IN ACCORDANCE WITH: 3 4 Generic specification: Publication IEC 60679-1/QC 690000 Sectional specification: Publication IEC 60679-4/QC 690100 Outline and dimensions (third angle projection): 7 TYPE OF OSCILLATOR 5 ENCLOSURE 6 Dimensions in millimetresEN60679-4-1:1998 4 BSI
29、 04-1999 1 Ratings (see 2.3 of IEC60679-1 for preferred ratings) Operating temperature range Climatic category Mechanical test severities 2 Characteristics (see 2.2 of IEC60679-1) Nominal output frequency/range Reference temperature Frequency tolerance(s) Input conditions (as applicable) Output cond
30、itions (as applicable) Ageing The following characteristics shall be stated as applicable: In addition, other characteristics may be stated. NOTE 1Information on the above characteristics may be given in tabular form. NOTE 2“if VCXO” means “if oscillator is voltage-controlled”. “if TCXO” means “if o
31、scillator is temperature-compensated”. “if OCXO” means “if oscillator is oven controlled”. 3 Marking The marking of the quartz crystal controlled oscillator and the primary package shall be in accordance with the requirements of2.4 of IEC60679-1. Full details shall be given in the detail specificati
32、on. Information about manufacturers who have components qualified to this detail specification is available in IECQC001005 Voltage : Current : Power : Voltage : Power : Waveform : Load : Control voltage if VCXO Pulling sensitivity if VCXO Linearity if VCXO Modulation details if VCXO Oven supply if O
33、CXO Voltage : Current : or Power : Stabilization time if OCXO or TCXO Retrace if OCXOEN60679-4-1:1998 BSI 04-1999 5 4 Ordering information The following ordering information shall be specified: a) quantity; b) IECQ or customer detail specification number, issue number and date; and, where applicable
34、, c) nominal frequency expressed in kilohertz or megahertz; d) product code; e) frequency tolerance(s) and operating temperature range; f) full description of any additional requirements. 5 Certified test records The detail specification shall state whether certified test records are required/not re
35、quired in accordance with3.12 of IEC60679-1. 6 Additional information (not for inspection purposes) The detail specification may include additional information (which is not normally required to be verified by the inspection procedure) such as circuit diagrams, curves, drawings and notes for the cla
36、rification of the detail specification. 7 Inspection requirements Subclause numbers of tests and performance requirements refer to IEC60679-1. The ILs and AQLs given in Table 1 are the minimum quality levels required and are selected from IEC60410. In this table D = destructive; ND = non-destructive
37、, IL = inspection level; AQL = acceptance quality level. The manufacturer and his customer shall ensure that any quality aspects of the quartz crystal controlled oscillator to be supplied, that are not covered by the maintenance of the capability approval programme, are included in the detail specif
38、ication. This blank detail specification does not include any periodic tests as these are controlled by the CQC testing under the maintenance of the capability approval, as defined in3.11 and3.12 of IEC60679-4.EN60679-4-1:1998 6 BSI 04-1999 Table 1 Subclause number and test D or ND Conditions of tes
39、t IL AQL % Performance requirements 100 % inspection ND 4.3.1 Visual test A 4.3.1 4.3.1 4.5.4 Output frequency at reference temperature 4.5.4 Frequency tolerance(s) offset frequency, where applicable or 4.5.5.1 Frequency at specified temperatures 4.5.5.1 Frequency tolerance(s) 4.5.11 Frequency adjus
40、tment (where applicable) 4.5.11 Minimum or minimum and maximum frequency change or 4.5.23 Frequency modulation characteristics Tests 1 to 5, as applicable 4.5.23 Tests 1 to 5, as applicable As 4.5.23 Group A inspection To be conducted on a sampling basis, lot-by-lot Subgroup A1 ND II 1,5 4.5.13 or 4
41、.5.14 Oscillator output voltage 4.5.13 (sinusoidal) or 4.5.14 (pulse) Limits, as specified 4.5.15 or 4.5.16 Oscillator output waveform 4.5.15 (sinusoidal) or 4.5.16 (pulse) Waveform, as specified 4.5.3.1 Oscillator input current or power, and where applicable, OCXO 4.5.3.1 Maximum current or power,
42、as specified 4.5.3.3 Oven input current or power, where applicable 4.5.3.3 Maximum current or power at switch-on Maximum power after stabilization or 4.5.3.2 Oven and oscillator input current or power, where applicable 4.5.3.2 Maximum current or power at switch-on Maximum power after stabilizationEN
43、60679-4-1:1998 BSI 04-1999 7 Table 1 Subclause number and test D or ND Conditions of test IL AQL % Performance requirements Subgroup A2 ND I 1,5 4.5.5.1 Frequency at specified temperatures (if not tested 100 %) 4.5.5.1 Frequency tolerance(s) Subgroup A3 ND I 1,5 Ageing, when applicable Use Annex B t
44、o this specification Slope to be specified NOTEIt may be necessary to conduct this test 100 %. Group B inspection To be conducted on a sampling basis, lot-by-lot Subgroup B1 ND S4 4,0 4.4.1 Dimensions Test A 4.4.1 4.4.1 Subgroup B2 ND S4 4,0 For hermetically sealed devices only 4.6.2.2 Fine leak tes
45、t 4.6.2.2 2.3.5 4.6.2.1 Gross leak test 4.6.2.1 4.6.2.1EN60679-4-1:1998 8 BSI 04-1999 Annex A (normative) Example of a front page layout for customer detail specifications A.1 Ratings (see 2.3 of IEC60679-1 for preferred ratings) Operating temperature range Climatic category Mechanical test severiti
46、es Annex B (normative) Ageing test The general conditions of test shall be as specified in4.7.1 of IEC60679-1, except that the duration shall be sufficient to achieve the specified slope of the frequency against time curve over a period of five days, with a minimum duration of15days for the test. Cu
47、stomer: Specification Issue number Manufacturer: Date Page 1 of ELECTRONIC COMPONENTS OF ASSESSED QUALITY BY CAPABILITY APPROVAL IN ACCORDANCE WITH: 3 Manufacturers type number Outline and dimensions (third angle projection): 7 Type of oscillator 5 Enclosure 6 Dimensions en millimetres9 blankBS EN 6
48、0679-4-1:1998 IEC 60679-4-1: 1998 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charte
49、r. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside f
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1