BS EN 60684-3-145 to 147-2001 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Extruded PTFE sleeving - Extruded PTFE .pdf

1、BRITISH STANDARD BS EN 60684-3- 145 to 147: 2001 IEC 60684-3- 145 to 147: 2001 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 145 to 147: Extruded PTFE sleeving The European Standard EN 60684-3-145 to 147:2001 has the status of a British Standard ICS 29.0

2、35.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 60684-3-145 to 147:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strate

3、gy Committee on 21 December 2001 BSI 21 December 2001 ISBN 0 580 38788 7 National foreword This British Standard is the official English language version of EN 60684-3-145 to 147:2001. It is identical with IEC 60684-3-145 to 147:2001. The UK participation in its preparation was entrusted by Technica

4、l Committee GEL/15, Material Specifications, to Subcommittee GEL/15/3/5, Sleevings, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old

5、number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications

6、 referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions

7、of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretati

8、on, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright d

9、ate displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60684-3-145 to 147 NORME EUROPENNE EUROPISCHE NORM October 2001 CENELEC European Committee for Electrotechnical Standardization Comit Europen de

10、Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60684-3-145 to 147:2001 E ICS 29.035.2

11、0 English version Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001) Gaines isolantes souples Partie 3: Spcifications pour types particuliers de gaines Feuilles 145 147: Gaines en PTFE extrud (C

12、EI 60684-3-145 147:2001) Isolierschluche Teil 3: Bestimmungen fr einzelne Schlauchtypen Bltter 145 bis 147: Extrudierte PTFE-Schluche (IEC 60684-3-145 bis 147:2001) This European Standard was approved by CENELEC on 2001-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulat

13、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This

14、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members

15、are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 60684-3-145 to 147:2001 - 2 - Foreword The text of

16、document 15C/1216/FDIS, future edition 1 of IEC 60684-3-145 to 147, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60684-3-145 to 147 on 2001-09-01. The following dates were fixed: latest date b

17、y which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-09-01 Annexes designated “normative“ are part of the body of

18、the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60684-3-145 to 147:2001 was approved by CENELEC as a European Standard without any modification. _ Page2 EN606843145to147 BSI21December200160684-

19、3-145 to 147 IEC:2001 3 INTRODUCTION This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1); Part 2: Methods of test (IEC 60684-2); Part 3: Sp

20、ecification requirements for individual types of sleeving (IEC 60684-3). This standard contains three of the sheets comprising part 3 as follows: Sheet 145: Extruded PTFE sleeving Thin wall Sheet 146: Extruded PTFE sleeving Standard wall Sheet 147: Extruded PTFE sleeving Thick wall Page3 EN606843145

21、to147 BSI21December200160684-3-145 to 147 IEC:2001 4 FLEXIBLE INSULATING SLEEVING Part 3: Specifications for individual types of sleeving Sheets 145 to 147: Extruded PTFE sleeving 1 Scope These sheets of IEC 60684-3 give the requirements for three types of non-heat-shrinkable sleeving, extruded from

22、 PTFE. Sleeving of this type is normally available with internal diameters up to 8,53 mm and in a range of wall thicknesses between 0,15 mm and 0,51 mm. This specification covers three levels of wall thickness: “thin wall”, “standard wall” and “thick wall” related to nominal internal diameter and wi

23、th corresponding differences in requirements for breakdown voltage. Experience of product performance indicates that PTFE sleeving may be suitable for inclusion in systems for operation at temperatures up to 250 C. These sleevings are normally available in the following opaque colours: black, brown,

24、 red, orange, yellow, green, blue, violet, grey, white, pink and turquoise. It is also available as non- coloured. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with

25、 the other property requirements listed in tables 1 and 2. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 60684. For dated references, subsequent amendments to, or revisions of, any of these

26、 publications do not apply. However, parties to agreements based on this part of IEC 60684 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to a

27、pplies. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60216 (all parts), Guide for the determination of thermal endurance properties of electrical insulating materials IEC 60304:1982, Standard colours for insulation for low-frequency cables and wires IEC 6

28、0684-1:1980, Specification for flexible insulating sleeving Part 1: Definitions and general requirements IEC 60684-2:1997, Flexible insulating sleeving Part 2: Methods of test IEC 60757:1983, Code for designation of colours Page4 EN606843145to147 BSI21December200160684-3-145 to 147 IEC:2001 5 3 Desi

29、gnation The sleeving shall be identified by the following designation:Sleeving IEC 60684 -3 -145 -5,44 -WH Description IEC publication - Number- Part- Sheet Size (nominal internal diameter, in millimetres) Colour Any abbreviation used for colour shall comply with IEC 60757 where applicable. The abbr

30、evi- ation for non-coloured shall be “NC”. Non-standard colours shall be written out in full. 4 Requirements In addition to the general requirements given in IEC 60684-1, the sleeving shall comply with the requirements in tables 1, 2 and 3. 5 Product qualification Product qualification shall normall

31、y be based on results from 6,07 mm nominal internal diameter black sleeving. Colour and colour fastness to light shall be qualified for all colours. 6 Thermal classification The procedures described in IEC 60216 for evaluation of thermal endurance are not readily applicable to PTFE. Page5 EN60684314

32、5to147 BSI21December200160684-3-145 to 147 IEC:2001 6 Table 1 Typical dimensions 1) Wall thickness mm Internal diameter mm Sheet 145 Thin wall Sheet 146 Standard wall Sheet 147 Thick wall Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 0,33 0,06 0,15 0,05 0,20 0,07 0,25 0,07

33、0,38 0,06 0,15 0,05 0,23 0,07 0,25 0,07 0,51 0,06 0,15 0,05 0,25 0,07 0,30 0,07 0,58 0,09 0,15 0,05 0,25 0,07 0,30 0,07 0,71 0,09 0,15 0,05 0,25 0,07 0,30 0,07 0,89 0,09 0,15 0,05 0,30 0,07 0,41 0,07 1,02 0,09 0,15 0,05 0,30 0,07 0,41 0,07 1,14 0,12 0,15 0,05 0,30 0,07 0,41 0,07 1,27 0,12 0,15 0,05

34、0,30 0,07 0,41 0,07 1,40 0,12 0,15 0,05 0,30 0,07 0,41 0,07 1,58 0,12 0,15 0,05 0,30 0,07 0,41 0,07 1,73 0,12 0,20 0,05 0,30 0,07 0,41 0,07 1,91 0,12 0,20 0,05 0,30 0,07 0,41 0,07 2,16 0,12 0,20 0,05 0,30 0,07 0,41 0,07 2,41 0,12 0,20 0,05 0,30 0,07 0,41 0,07 2,72 0,12 0,20 0,05 0,30 0,07 0,41 0,07

35、3,05 0,12 0,20 0,05 0,38 0,07 0,51 0,10 3,43 0,15 0,20 0,05 0,38 0,07 0,51 0,10 3,84 0,15 0,25 0,05 0,38 0,07 0,51 0,10 4,29 0,15 0,25 0,07 0,38 0,07 0,51 0,10 4,83 0,25 0,25 0,07 0,38 0,07 0,51 0,10 5,44 0,25 0,25 0,07 0,38 0,07 0,51 0,10 6,07 0,25 0,25 0,07 0,38 0,07 0,51 0,10 6,81 0,25 0,25 0,07

36、0,38 0,07 0,51 0,10 7.62 0,25 0,25 0,07 0,38 0,07 0,51 0,10 8.53 0,25 0,25 0,07 0,38 0,07 0,51 0,10 1)For sizes not included in the table the nominal wall thickness and the tolerance for the next lower (or higher) size shall be used. Page6 EN606843145to147 BSI21December200160684-3-145 to 147 IEC:200

37、1 7 Table 2 Property requirements Property IEC 60684-2 clause or subclause Units Max. or min. Requirements Remarks Colour Shall be a reasonable match to IEC 60304, where applicable See part 1 Dimensions 3 mm Table 1 Density 4 g/cm 3 Max. 0,05 tolerance Maximum permitted deviation from manufacturers

38、declared values Resistance to heat followed by: 6 Max. No sign of dripping, flowing or cracking Heating temperature 350 C 5 K Cut lengths of 150 mm Density 4 g/cm 3 Max. 0,05 tolerance Maximum permitted deviation from original density in clause 4 Longitudinal change 9%M i n . 1 0 Bending at low temp

39、erature 14 Min. There shall be no cracking Test temperature 65 C or lower. For cut strips use a mandrel with diameter 9-10 times the nominal wall thickness. For sleeving use a mandrel with a diameter 18-20 times the nominal wall thickness Tensile strength 19.1 or 19.2 MPa Min. 25 For nominal interna

40、l diameter of 6 mm and above use dumb-bells. Rate of jaw separation (250 50) mm/min Elongation at break 19.1 or 19.2 % Min. 300 Speed of separation of jaws (250 50) mm/min. Breakdown voltage 21 kV Min. See table 3 Test at room temperature only Volume resistivity at room temperature 23.4.2 m Min. 10

41、15 Where absolute values are not obtained, report the results as greater than the highest measurable value Colour fastness to light 34 The colour contrast between the exposed and unexposed parts of the specimen shall be equal to or less than that of the fastness standard Fastness standard No. 5 Page

42、7 EN606843145to147 BSI21December200160684-3-145 to 147 IEC:2001 8 Table 3 Requirements for breakdown voltage The breakdown voltage shall be determined by any of the methods given in 21.2, 21.3 or 21.4 of IEC 60684-2. The central value shall comply with the minimum value in the table below. The rate

43、of application of the voltage shall be such that the required value is reached within 10 s to 20 s. Nominal wall thickness mm Breakdown voltage kV (min) = 0,15 0,16 to 0,20 0,21 to 0,28 0,29 to 0,35 0,36 to 0,40 = 0,41 4,0 6,0 8,0 10,0 12,0 14,0 Page8 EN606843145to147 BSI21December2001- 3 - EN 60684

44、-3-145 to 147:2001 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate pla

45、ces in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication refe

46、rred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60216 Series Guide for the determination of thermal endurance properties of electrical insul

47、ating materials EN 60216/HD 611 Series IEC 60304 1982 Standard colours for insulation for low- frequency cables and wires HD 402 S2 1984 IEC 60684-1 1980 Specification for flexible insulating sleeving Part 1: Definitions and general requirements EN 60684-1 1995 IEC 60684-2 1997 Part 2: Methods of te

48、st EN 60684-2 1997 IEC 60757 1983 Code for designation of colours HD 457 S1 1985 Page9 EN606843145to147 BSI21December2001BS EN 60684-3- 145 to 147: 2001 IEC 60684-3- 145 to 147: 2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body respo

49、nsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve