BS EN 60730-1-2016 Automatic electrical controls General requirements《自动电控制器 一般要求》.pdf

1、Automatic electrical controls Part 1: General requirementsBS EN 60730-1:2016(IEC 60730-1:2013, modified + COR1:2014)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 60730-1:2016. ItBS EN 60730-2-2 B

2、S EN 60730-2-3 BS EN 60730-2-4 BS EN 60730-2-5 BS EN 60730-2-6 BS EN 60730-2-7 BS EN 60730-2-8 BS EN 60730-2-9BS EN 60730-2-10 BS EN 60730-2-11 BS EN 60730-2-12 BS EN 60730-2-13BS EN 60730-2-14 BS EN 60730-2-15BS EN 60730-2-19The CENELEC common modifications have been implemented at theappropriate p

3、laces in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted to Technical Com-mittee CPL/72, Electrical control devices for household equipment andappliances.A list of organizations represented on this committee can be obtained onrequest to its secretary.

4、This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 72682 8ICS 97.120; 33.160.20Compliance with a British Standard canno

5、t confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60730-1:2016 is derived from IEC 60730-1:2013, incorp

6、orating corrigendum September sub parts dependent on the 2011 edition: 2014 and amendment 1:2015. It supersedes BS EN 60730-1:2011 which willbe withdrawn upon the publication of all revised editions of the following The start and finish of text introduced or altered by amendment is !“indicated in th

7、e text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by .The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Tags altered by IEC corrigendum September 2014

8、is indicated in the text by .EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60730-1 July 2016 ICS 97.120 Supersedes EN 60730-1:2011 English Version Automatic electrical controls - Part 1: General requirements (IEC 60730-1:2013 , modified + COR1:2014) Dispositifs de commande lectrique automatiq

9、ues - Partie 1: Exigences gnrales (IEC 60730-1:2013 , modifie + COR1:2014) Automatische elektrische Regel- und Steuergerte - Teil 1: Allgemeine Anforderungen (IEC 60730-1:2013 , modifiziert + COR1:2014) This European Standard was approved by CENELEC on 2016-03-01. CENELEC members are bound to comply

10、 with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC M

11、anagement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has

12、the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

13、ia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrot

14、echnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60730-1:2016 E EN 60730-1:2016 ii European foreword This document (EN 60730-1:2016) consists of

15、the text of IEC 60730-1:2013 + corrigendum 1:2014 prepared by IEC/TC 72 “Automatic electrical controls“, together with the common modifications prepared by CLC/TC 72 “Automatic controls for household use“. The following dates are fixed: latest date by which the document has to be implemented at nati

16、onal level by publication of an identical national standard or by endorsement (dop) 2017-01-29 latest date by which the national standards conflicting with the document have to be withdrawn (dow) - * * Justification for no dow: This European Standard supersedes EN 60730-1:2011. However, EN 60730-1:2

17、011 remains valid until all the Part 2s which are used in conjunction with it have been withdrawn. No date of withdrawal (dow) has been given pending the updating of all the Part 2s to align with this EN 60730-1:2016. The applicable date of withdrawal is given in each Part 2. It is intended the dow

18、for this Part 1 will be fixed once all the Part 2s have been updated. This document supersedes EN 60730-1:2011. EN 60730-1:2016 includes the following significant technical changes with respect to EN 60730-1:2011: changes of the title of the Standard into “Automatic electrical controls Part 1: Gener

19、al requirements”; revisions to Clause H.26 based on changes in technology, applications, and to improve consistency and layout; modification to Table H.12 to align with CISPR 22; revisions to Annex J to correlate the fault modes of thermistors, and to exempt thermistors used in conjunction with type

20、 1 controls in SELV low power circuits from the tests specified in Annex J; new requirements covering battery-powered controls, and the use of batteries in controls; revision addressing the relay faults in Table H.24; new/updated requirements in Clause 24, for switch mode power supplies; revisions c

21、overing the allowance of screwless-type clamping units complying with IEC 60999-1; new requirements addressing remotely actuated control functions; addition of a new/updated leakage current diagram to align the Annex E diagram with the diagram in IEC 60990; updated requirements for temperature sensi

22、ng controls. This Part 1 is to be used in conjunction with the appropriate Part 2 for a particular type of control, or for controls for particular applications. This Part 1 may also be applied, so far as reasonable, to controls not mentioned in a Part 2, and to controls designed on new principles, i

23、n which case additional requirements may be considered to be necessary. Where, for a particular clause or subclause, the text of Part 2 indicates: Addition: the Part 1 text applies with the additional requirement indicated in a Part 2; Modification: the Part 1 text applies with a minor change as ind

24、icated in a Part 2; Replacement: the Part 2 text contains a change which replaces the Part 1 text in its entirety. Where no change is necessary, the Part 2 indicates that the relevant clause or subclause applies. BS EN 60730-1:2016EN 60730-1:2016 NOTE In this standard the following print types are u

25、sed: Requirements proper: in roman type. Test specifications: in italic type. Explanatory matter: in smaller roman type. - Defined terms: bold type. Some table titles contain reference in brackets to table numbers in IEC 60730-1:1999 (edition 3) for ease of correlation between Parts 2 and the Part 1

26、. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60730-1:2013 are prefixed “Z”. Special national conditions are listed in Annex ZB (normative) which forms part of this standard. National deviations are listed in Annex ZC (informative). Endorsement notice

27、 The text of the International Standard IEC 60730-1:2013 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 60730-1:2016iii EN 60730-1:2016 Annex ZA (normative) Normative references to international publications with their corresponding European publications The f

28、ollowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When

29、an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year - - Electri

30、c cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation EN 50525-2-11 - - - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (

31、Uo/U) Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation EN 50525-2-21 - IEC 60038 - IEC standard voltages EN 60038 - IEC 60065 (mod) + A1 (mod) - - + A2 (mod) - 2001 2005 - - 2010 - Audio, video and similar electronic apparatus - Safety requirements

32、 EN 60065 + A1 + corrig. August + A11 + A2 + A12 2002 1)2006 1)2007 1)2008 1)2010 1)2011 1)IEC 60068-2-75 - Environmental testing Part 2-75: Tests - Test Eh: Hammer tests EN 60068-2-75 - IEC 60085 - Electrical insulation - Thermal evaluation and designation EN 60085 - IEC 60099-1 - Surge arresters P

33、art 1: Non-linear resistor type gapped surge arresters for a.c. systems EN 60099-1 - IEC 60112 + A1 2003 2009 Method for the determination of the proof and the comparative tracking indices of solid insulating materials EN 60112 + A1 2003 2009 1)Superseded by EN 60065:2014 (IEC 60065:2014): DOW = 201

34、7-11-17. BS EN 60730-1:2016iv EN 60730-1:2016 Publication Year Title EN/HD Year IEC 60127-1 - Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links EN 60127-1 - IEC 60227-1 - Polyvinyl chloride insulated cables of rated voltages up to and including

35、 450/750 V Part 1: General requirements - - IEC 60245-1 - Rubber insulated cables - Rated voltages up to and including 450/750 V Part 1: General requirements - - IEC 60269-1 - Low-voltage fuses Part 1: General requirements EN 60269-1 - IEC 60335-1 (mod) - 2010 - Household and similar electrical appl

36、iances - Safety Part 1: General requirements EN 60335-1 + AC 2012 2014 IEC 60364 Series Low-voltage electrical installations HD 384 / HD 60364 Series IEC 60384-14 - Fixed capacitors for use in electronic equipment Part 14: Sectional specification - Fixed capacitors for electromagnetic interference s

37、uppression and connection to the supply mains EN 60384-14 - IEC 60384-16 - Fixed capacitors for use in electronic equipment Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors EN 60384-16 - IEC 60384-17 - Fixed capacitors for use in electronic equipment P

38、art 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors EN 60384-17 - IEC 60417 series Graphical symbols for use on equipment - - IEC 60423 - Conduit systems for cable management - Outside diameters of conduits for electrical installations and thread

39、s for conduits and fittings EN 60423 - IEC 60529 - + A1 1989 - 1999 Degrees of protection provided by enclosures (IP Code) EN 60529 + corrig. May + A1 1991 1993 2000 IEC 60539 series Directly heated negative temperature coefficient thermistors EN 60539 series IEC 60664-1 2007 Insulation coordination

40、 for equipment within low-voltage systems Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60664-3 + A1 2003 2010 Insulation coordination for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for protection against pollution EN 60664-3 + A1 2003 2010 BS E

41、N 60730-1:2016v EN 60730-1:2016 Publication Year Title EN/HD Year IEC 60664-4 - Insulation coordination for equipment within low-voltage systems Part 4: Consideration of high-frequency voltage stress EN 60664-4 - IEC 60669-1 (mod) + A1 (mod) + A2 (mod) 1998 1999 2006 Switches for household and simil

42、ar fixed-electrical installations Part 1: General requirements EN 60669-1 + A1 + A2 1999 2002 2008 IEC 60695-2-10 - Fire hazard testing Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure EN 60695-2-10 - IEC 60695-2-11 2000 Fire hazard testing Part 2-11: Gl

43、owing/hot-wire based test methods - Glow-wire flammability test method for end-products EN 60695-2-11 2001 2)IEC 60695-10-2 - Fire hazard testing Part 10-2: Abnormal heat - Ball pressure test EN 60695-10-2 - IEC 60730 series Automatic electrical controls for household and similar use EN 60730 series

44、 IEC 60738-1 - Thermistors - Directly heated positive temperature coefficient Part 1: Generic specification EN 60738-1 - IEC 60738-1-1 - Thermistors - Directly heated positive step-function temperature coefficient Part 1-1: Blank detail specification - Current limiting application - Assessment level

45、 EZ EN 60738-1-1 - IEC 60947-1 2007 Low-voltage switchgear and controlgear Part 1: General rules EN 60947-1 2007 IEC 60998-2-2 - Connecting devices for low-voltage circuits for household and similar purposes Part 2-2: Particular requirements for connecting devices as separate entities with screwless

46、-type clamping units EN 60998-2-2 - IEC 60998-2-3 - Connecting devices for low-voltage circuits for household and similar purposes Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units EN 60998-2-3 - IEC 60999-1 - Connecting devices - E

47、lectrical copper conductors - Safety requirements for screw-type and screwless-type clamping units Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm up to 35 mm (included) EN 60999-1 - IEC 61000 Series Electromagnetic compatibility (EMC) EN 61000

48、Series 2)Superseded by EN 60695-2-11:2014 (IEC 60695-2-11:2014): DOW = 2017-03-13. BS EN 60730-1:2016vi EN 60730-1:2016 Publication Year Title EN/HD Year IEC 61000-3-2 - Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per pha

49、se) EN 61000-3-2 - IEC 61000-3-3 2008 Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection EN 61000-3-3 2008 3)IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 2009