1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHand-held motor-operated electric tools Safety Part 2-9: Particular requirements for tappersBS EN 60745-2-9:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010
2、03:43, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60745-2-9:2009. It wasderived by CENELEC from IEC 60745-2-9:2003It supersedes BS EN 60745-2-9:2003+A1:2008, which will bewithdrawn on 1 April 2011.The CENELEC common modifications have been impleme
3、nted at the appro-priate places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted to Technical CommitteeCPL/116, Portable motor-operated tools.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publi
4、cation does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 64797 0ICS 25.140.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the au
5、thority of the StandardsPolicy and Strategy Committee on 31 March 2010Amd. No. Date Text affectedBRITISH STANDARDBS EN 60745-2-9:2009, incorporating amendment1:200 .8The start and finish of text introduced or altered by amendment is indicated in the text by tags. Text indicating changes to IEC text
6、carry the number of theIEC amendment. For example, text altered by IEC amendment 1 isindicated by .!“Amendments/corrigenda issued since publicationLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:43, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60745-2-9 NORME EUROPENNE EUROPIS
7、CHE NORM September 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and
8、by any means reserved worldwide for CENELEC members. Ref. No. EN 60745-2-9:2009 E English version Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers (IEC 60745-2-9:2003, modified + A1:2008) Outils lectroportatifs moteur - Scurit - Partie 2-9: Rgles parti
9、culires pour les taraudeuses (CEI 60745-2-9:2003, modifie + A1:2008)Handgefhrte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-9: Besondere Anforderungen fr Gewindeschneider (IEC 60745-2-9:2003, modifiziert + A1:2008) This European Standard was approved by CENELEC on 2009-07-01. CENELEC memb
10、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati
11、on to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat h
12、as the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherl
13、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. ICS 25.140.20 Supersedes EN 60745-2-9:2003 + A1:2008 + A11:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:43, Uncontrolled Copy, (c) BSIForeword The text of the I
14、nternational Standard IEC 60745-2-9:2003, prepared by SC 61F (transformed into IEC TC 116, Safety of hand-held motor-operated electric tools), together with the common modifications prepared by the Technical Committee CENELEC TC 61F (transformed into TC 116) was submitted to the formal vote and was
15、approved by CENELEC as EN 60745-2-9 on 2003-02-01. A draft amendment (prAB) was prepared to align Subclause 6.2 with the new Subclause 6.2 in EN 60745-1. Moreover, vibration values determined with the new 6.2 are complying with the requirements of the Physical Agents Directive Vibration 2002/44/EC.
16、The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment A11 to EN 60745-2-9:2003 on 2007-06-01. The text of document 61F/674/CDV, future amendment 1 to IEC 60745-2-9:2003, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure an
17、d was approved by CENELEC as amendment A1 to EN 60745-2-9:2003 on 2008-04-01. A further draft amendment (prAC), extending Annex ZZ to include the new MD 2006/42/EC, was submitted to the formal vote. The combined texts were approved by CENELEC as a new edition of EN 60745-2-9 on 2009-07-01. This Euro
18、pean Standard supersedes EN 60745-2-9:2003 + A11:2007 + A1:2008. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-07-01 - latest date by which the national standards con
19、flicting with the EN have to be withdrawn (dow) 2011-04-01 This standard is divided into two parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this s
20、tandard; Part 2: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CENELEC by the European
21、Commission and the European Free Trade Association and supports the essential requirements of EC Directive 98/37/EC (Machinery Directive), amended by EC Directive 98/79/EC, and of EC Directive 2006/42/EC. See Annexes ZZA and ZZB. Compliance with the clauses of Part 1 together with this Part 2 provid
22、es one means of conforming with the essential health and safety requirements of the Directive concerned. CEN/TC 255 is producing standards for non-electric tappers (EN 792-3). Warning: Other requirements and other EC Directives can be applicable to the products falling within the scope of this stand
23、ard. This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2. BS EN 60745-2-9:2009- 2 -EN 60745-2-9:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:43, Uncontrolled Copy, (c) BSIThis Part 2-9 is to be used in conjunction with EN 60745-1:2009.
24、When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Subclauses and figures which are additional to those in Part 1 are numbered starting from 101. Subclauses, tables and figures which are additional to those in IEC 60745-2-
25、9 are prefixed “Z”. NOTE In this standard, the following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in smaller roman type. _BS EN 60745-2-9:2009- 3 -EN 60745-2-9:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:43,
26、 Uncontrolled Copy, (c) BSIEndorsement notice The text of the International Standard IEC 60745-2-9:2003 + A1:2008 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 60745-2-9:2009- 4 -EN 60745-2-9:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/0
27、7/2010 03:43, Uncontrolled Copy, (c) BSIAnnex ZZ (informative) Coverage of Essential Requirements of EC Directives Annex ZZA (informative) Coverage of Essential Requirements of Directive 98/37/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and
28、 the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EC Directive 98/37/EC (Machinery Directive), amended by Directive 98/79/EC. Compliance with this standard provides one means of conformity with the specified essential requir
29、ements of the Directives concerned. WARNING: Other requirements and other EC Directives may be applicable to the products falling within the scope of this standard. Annex ZZB (informative) Coverage of Essential Requirements of Directive 2006/42/EC This European Standard has been prepared under a man
30、date given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EC Directive 2006/42/EC (Machinery Directive). Compliance with this standard provides one means of conformity with the spe
31、cified essential requirements of the Directive concerned. WARNING: Other requirements and other EC Directives may be applicable to the products falling within the scope of this standard. _ BS EN 60745-2-9:2009- 5 -EN 60745-2-9:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010
32、 03:43, Uncontrolled Copy, (c) BSIHAND-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-9: Particular requirements for tappers1 Scope2 Normative referencesThis clause of Part 1 is applicable.3 DefinitionsThis clause of Part 1 is applicable except as follows:Additional definition:3.101tappertool inte
33、nded for cutting internal screw threads4 General requirementsThis clause of Part 1 is applicable.5 General conditions for the testsThis clause of Part 1 is applicable.This clause of Part 1 is applicable except as follows: Addition: This standard applies to tappers. Terms and! “6 Environmental requir
34、ements This clause of Part 1 is applicable except as follows: 6.1.2.4 Modification: Tappers are suspended. The tap holder shall be horizontal. 6.1.2.5 Modification: Tappers are tested at no-load. !“BS EN 60745-2-9:2009- 6 -EN 60745-2-9:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 0
35、9/07/2010 03:43, Uncontrolled Copy, (c) BSI6.2 Vibration 6.2.4.2 Location of the measurement Addition: Figure Z101 shows the position for tappers. 6.2.6.3 Operating conditions Modification: Table Z101 Operating conditions for tappers Orientation Tappers are tested at no load. The tapper is held vert
36、ically during the test Tool bit Tool bit of medium length and size Grip force Hold the machine with normal gripping force, avoiding excessive gripping force Test cycle One test cycle is given when the tool is switched on for no load at maximum speed for more than 10 s and then switched off again. Th
37、e measurement is conducted during 10 s within this period NOTE As it is difficult to measure load applications of tappers in laboratories and results have shown that the load has no influence on the vibration results, no-load has been chosen as operating condition. 6.2.7.2 Declaration of the vibrati
38、on total value Addition: The vibration total value ahof the handle with the highest emission and the uncertainty K shall be declared. 7 ClassificationThis clause of Part 1 is applicable.8 Marking and instructionsThis clause of Part 1 is applicable, except as follows:BS EN 60745-2-9:2009- 7 -EN 60745
39、-2-9:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:43, Uncontrolled Copy, (c) BSI8.1 Addition:In addition the tool shall have the following marking: maximum diameter, in millimetres, of thread which can be cut.The diameter shall refer to a unified ISO thread to be cut
40、into steel having a tensile strengthof 390 N/mm and a thickness of twice the thread diameter, unless otherwise indicated onthe tool.9 Protection against access to live partsThis clause of Part 1 is applicable.10 StartingThis clause of Part 1 is applicable.11 Input and currentThis clause of Part 1 is
41、 applicable.12 HeatingThis clause of Part 1 is applicable, except as follows:12.4 Replacement:The tool is operated intermittently for 30 cycles or until temperatures stabilise, whichever isachieved first, each cycle comprising a period of continuous operation of 30 s and a restperiod of 90 s with th
42、e tool switched off, the tool being loaded during the periods of operationby means of a brake adjusted so as to attain rated input or rated current. The temperaturerises are measured at the end of the “on” period. At the manufacturers option the tool may beoperated continuously until thermal stabili
43、sation.13 Leakage currentThis clause of Part 1 is applicable.14 Moisture resistanceThis clause of Part 1 is applicable.15 Electric strengthThis clause of Part 1 is applicable.16 Overload protection of transformers and associated circuitsThis clause of Part 1 is applicable.BS EN 60745-2-9:2009- 8 -EN
44、 60745-2-9:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:43, Uncontrolled Copy, (c) BSI17 EnduranceThis clause of Part 1 is applicable.18 Abnormal operationThis clause of Part 1 is applicable.19 Mechanical hazardsThis clause of Part 1 is applicable.20 Mechanical streng
45、th21 Construction22 Internal wiringThis clause of Part 1 is applicable.23 ComponentsThis clause of Part 1 is applicable.24 Supply connection and external flexible cordsThis clause of Part 1 is applicable.25 Terminals for external conductorsThis clause of Part 1 is applicable.26 Provision for earthin
46、gThis clause of Part 1 is applicable.27 Screws and connectionsThis clause of Part 1 is applicable.This clause of Part 1 is applicable, except as follows: 20.5 This subclause is not applicable. !“This clause of Part 1 is applicable, except as follows: 21.32 This subclause is not applicable. 21.Z1 Thi
47、s clause of Part 1 is not applicable. !“ BS EN 60745-2-9:2009- 9 -EN 60745-2-9:2009 (E)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:43, Uncontrolled Copy, (c) BSI29 Resistance to heat, fire and trackingThis clause of Part 1 is applicable.30 Resistance to rustingThis clause of
48、 Part 1 is applicable.31 Radiation, toxicity and similar hazardsThis clause of Part 1 is applicable.28 Creepage distances, clearances and distances through insulationThis clause of Part 1 is applicable.Figure Z101 Position of transducer for tappers BS EN 60745-2-9:2009- 10 -EN 60745-2-9:2009 (E)Lice
49、nsed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 09/07/2010 03:43, Uncontrolled Copy, (c) BSIAnnexesThe annexes of Part 1 are applicable except as follows.BibliographyThe bibliography of Part 1 is applicable._Annex K (normative) Battery tools and battery packs K.1 Addition: All clauses of this Part 2 apply unless otherwise specified in this annex. K.12.4 This subclause of Part 2 is not applicable. Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sou
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1