BS EN 60793-2-10-2016 Optical fibres Product specifications Sectional specification for category A1 multimode fibre《光纤 产品规范 A1类多模纤维分规范》.pdf

1、BSI Standards PublicationOptical fibresPart 2-10: Product specifications Sectional specification for category A1 multimode fibreBS EN 60793-2-10:2016National forewordThis British Standard is the UK implementation of EN 60793-2-10:2016. It is identical to IEC 60793-2-10:2015. It supersedes BS EN 6079

2、3-2-10:2011which is withdrawn.The UK participation in its preparation was entrusted by Technical Com-mittee GEL/86, Fibre optics, to Subcommittee GEL/86/1, Optical fibres and cables.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does

3、 not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 84821 6ICS 33.180.10Compliance with a British Standard cannot confer immunity fromlegal o

4、bligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60793-2-10:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60793-2-10 Febru

5、ary 2016 ICS 33.180.10 Supersedes EN 60793-2-10:2011 English Version Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibre (IEC 60793-2-10:2015) Fibres optiques - Partie 2-10: Spcifications de produits - Spcification intermdiaire pour les fibres

6、 multimodales de catgorie A1 (IEC 60793-2-10:2015) Lichtwellenleiter - Teil 2-10: Produktspezifikationen - Rahmenspezifikation fr Mehrmodenfasern der Kategorie A1 (IEC 60793-2-10:2015) This European Standard was approved by CENELEC on 2015-12-24. CENELEC members are bound to comply with the CEN/CENE

7、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre o

8、r to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

9、 the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux

10、embourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung

11、CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60793-2-10:2016 E BS EN 60793-2-10:2016EN 60793-2-10:2016 2 European foreword The text of document 86A/1631/CDV, f

12、uture edition 5 of IEC 60793-2-10, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60793-2-10:2016. The following dates are fixed: latest date by which the document has to be implemented at national level

13、 by publication of an identical national standard or by endorsement (dop) 2016-09-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-12-24 This document supersedes EN 60793-2-10:2011. Attention is drawn to the possibility that some of the ele

14、ments of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60793-2-10:2015 was approved by CENELEC as a European Standard without any modific

15、ation. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61280-1-4 NOTE Harmonized as EN 61280-1-4. IEC 61280-1-3 NOTE Harmonized as EN 61280-1-3. IEC 60793-1-1 NOTE Harmonized as EN 60793-1-1. IEC 60794-1-1 NOTE Harmonized as EN 60794-1

16、-1. BS EN 60793-2-10:2016EN 60793-2-10:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. Fo

17、r dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-

18、to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-1 series Optical fibres - Part 1: Measurement methods and test procedures EN 60793-1 series IEC 60793-1-20 - Optical fibres - Part

19、1-20: Measurement methods and test procedures - Fibre geometry EN 60793-1-20 - IEC 60793-1-21 - Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry EN 60793-1-21 - IEC 60793-1-22 - Optical fibres - Part 1-22: Measurement methods and test procedures - Length measure

20、ment EN 60793-1-22 - IEC 60793-1-30 - Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test EN 60793-1-30 - IEC 60793-1-31 - Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength EN 60793-1-31 - IEC 60793-1-32 - Optical fibres - Part

21、1-32: Measurement methods and test procedures - Coating strippability EN 60793-1-32 - IEC 60793-1-33 - Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility EN 60793-1-33 - IEC 60793-1-34 - Optical fibres - Part 1-34: Measurement methods and test proce

22、dures - Fibre curl EN 60793-1-34 - IEC 60793-1-40 - Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 - BS EN 60793-2-10:2016EN 60793-2-10:2016 4 Publication Year Title EN/HD Year IEC 60793-1-41 - Optical fibres - Part 1-41: Measurement methods and test

23、procedures - Bandwidth EN 60793-1-41 - IEC 60793-1-42 - Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion EN 60793-1-42 - IEC 60793-1-43 - Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement EN 60793-1-43 - IEC

24、 60793-1-46 - Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance EN 60793-1-46 - IEC 60793-1-47 - Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss EN 60793-1-47 - IEC 60793-1-49 - Optical fibres

25、- Part 1-49: Measurement methods and test procedures - Differential mode delay EN 60793-1-49 - IEC 60793-1-50 - Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests EN 60793-1-50 - IEC 60793-1-51 - Optical fibres - Part 1-51: Measurement methods and te

26、st procedures - Dry heat (steady state) tests EN 60793-1-51 - IEC 60793-1-52 - Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests EN 60793-1-52 - IEC 60793-1-53 - Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion test

27、s EN 60793-1-53 - IEC 60793-2 2011 Optical fibres - Part 2: Product specifications - General EN 60793-2 2012 IEC 61280-4-1 - Fibre optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement EN 61280-4-1 - IEC/TR 61931 - Fibre optic - Terminolo

28、gy - - BS EN 60793-2-10:2016 2 IEC 60793-2-10:2015 IEC 2015 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations . 9 3.1 Terms and definitions 9 3.2 Abbreviations 9 4 Specifications 9 4.1 Dimensional requirements . 9 4.2 Mechanical requirements 10 4.3 Trans

29、mission requirements . 11 4.4 Environmental requirements . 13 4.4.1 General . 13 4.4.2 Mechanical environmental requirements (common to all fibres in category A1) 14 4.4.3 Transmission environmental requirements . 15 (normative) Family specifications for A1a multimode fibres 16 Annex AA.1 General .

30、16 A.2 Dimensional requirements . 16 A.3 Mechanical requirements 17 A.4 Transmission requirements . 17 A.5 Environmental requirements . 18 (normative) Family specifications for A1b multimode fibres 19 Annex BB.1 General . 19 B.2 Dimensional requirements . 19 B.3 Mechanical requirements 19 B.4 Transm

31、ission requirements . 19 B.5 Environmental requirements . 20 (normative) Family specifications for A1d multimode fibres 21 Annex CC.1 General . 21 C.2 Dimensional requirements . 21 C.3 Mechanical requirements 21 C.4 Transmission requirements . 21 C.5 Environmental requirements . 22 (normative) Fibre

32、 differential mode delay (DMD) and calculated effective Annex Dmodal bandwidth (EMBc) requirements . 23 D.1 A1a.2 fibre DMD requirements 23 D.1.1 General . 23 D.1.2 DMD templates 23 D.1.3 DMD interval masks . 24 D.2 A1a.2 fibre EMBcrequirements . 25 D.2.1 General . 25 D.2.2 Calculated effective band

33、width 25 D.3 A1a.3 DMD requirements 27 D.3.1 General . 27 D.3.2 DMD templates 27 D.3.3 DMD interval masks . 28 BS EN 60793-2-10:2016IEC 60793-2-10:2015 IEC 2015 3 D.4 A1a.3 fibre EMBcrequirements . 28 D.4.1 General . 28 D.4.2 Calculated effective bandwidth 28 (informative) Modal bandwidth considerat

34、ions and transmitter requirements 29 Annex EE.1 Background. 29 E.2 Transmitter encircled flux (EF) and centre wavelength requirements . 29 E.2.1 Encircled flux . 29 E.2.2 Centre wavelength . 29 E.3 EMB 30 (informative) Bandwidth nomenclature explanation . 31 Annex F(informative) Preliminary indicati

35、ons for items needing further study 32 Annex GG.1 Effective modal bandwidth (EMB) at 1 300 nm 32 G.2 Scaling of EMB with DMD . 32 (informative) Applications supported by A1 fibres 34 Annex HH.1 Internationally standardised applications . 34 H.2 Used commercial bandwidth specifications . 34 H.3 Cross

36、 reference of fibre types in this standard and ISO/IEC 11801 . 35 H.4 Reference documents . 35 (informative) 1-Gigabit, 10-Gigabit, 40-Gigabit and 100-Gigabit Ethernet Annex Iapplications 36 Bibliography 40 Figure 1 Relation between bandwidths at 850 nm and 1 300 nm 13 Figure D.1 DMD template requir

37、ements . 24 Table 1 Dimensional attributes and measurement methods 10 Table 2 Dimensional requirements common to category A1 fibres 10 Table 3 Additional dimensional attributes required in family specifications . 10 Table 4 Mechanical attributes and measurement methods . 11 Table 5 Mechanical requir

38、ements common to category A1 fibres . 11 Table 6 Transmission attributes and measurement methods 12 Table 7 Additional transmission attributes required in family specifications . 12 Table 8 Environmental exposure tests . 13 Table 9 Attributes measured for environmental tests 14 Table 10 Strip force

39、for environmental tests . 14 Table 11 Tensile strength for environmental tests 14 Table 12 Stress corrosion susceptibility for environmental tests . 15 Table 13 Change in attenuation for environmental tests . 15 Table A.1 Dimensional requirements specific to A1a fibres 16 Table A.2 Mechanical requir

40、ements specific to A1a fibres 17 Table A.3 Transmission requirements specific to A1a fibres . 18 Table B.1 Dimensional requirements specific to A1b fibres 19 Table B.2 Mechanical requirements specific to A1b fibres 19 Table B.3 Transmission requirements specific to A1b fibres . 20 Table C.1 Dimensio

41、nal requirements specific to A1d fibres 21 BS EN 60793-2-10:2016 4 IEC 60793-2-10:2015 IEC 2015 Table C.2 Mechanical requirements specific to A1d fibres 21 Table C.3 Transmission requirements specific to A1d fibres. 22 Table D.1 DMD templates for A1a.2 fibres . 23 Table D.2 DMD interval masks for A1

42、a.2 fibres 25 Table D.3 DMD weightings (1 of 2) 26 Table D.4 DMD templates for A1a.3 fibres . 28 Table D.5 DMD interval masks for A1a.3 fibres 28 Table F.1 Bandwidth nomenclature explanation . 31 Table H.1 Some internationally standardised applications supported by A1a and A1b fibres 34 Table H.2 Ty

43、pically used commercial bandwidth specifications for A1a and A1b graded-index multimode fibres 35 Table H.3 Cross reference between this standard and ISO/IEC 11801 . 35 Table I.1 Summary of 1 Gb/s, 10 Gb/s, 40 Gb/s and 100 Gb/s Ethernet requirements and capabilities (1 of 3) 37 BS EN 60793-2-10:2016

44、IEC 60793-2-10:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 2-10: Product specifications Sectional specification for category A1 multimode fibres FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization compris

45、ing all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standar

46、ds, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prepara

47、tory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizat

48、ions. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of r

49、ecommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publi