BS EN 60794-2-10-2011 Optical fibre cables Indoor optical fibre cables Family specification for simplex and duplex cables《光缆 室内光缆 单股光缆和双股光缆的类规范》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 60794-2-10:2011Optical fibre cables Part 2-10: Indoor optical fibre cables Family specification for simplex and duplexcablesBS EN 60794-2-10:2011 BRITISH STANDARDNational f

2、orewordThis British Standard is the UK implementation of EN60794-2-10:2011. It is identical to IEC 60794-2-10:2011. It supersedes BS EN 60794-2-10:2003 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/86/1, Optical fibres and cables.A list of organiz

3、ations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 70004 0ICS 33.180.10Compliance with a British Standard cann

4、ot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 3 November 2011.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 60794-2-10:2011EUROPEAN STANDARD EN 60794-2-10 NORME EUROPENNE EUROPI

5、SCHE NORM October 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by

6、any means reserved worldwide for CENELEC members. Ref. No. EN 60794-2-10:2011 E ICS 33.180.10 Supersedes EN 60794-2-10:2003English version Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2011) Cbles fibres optiques -

7、Partie 2-10: Cbles intrieurs fibres optiques - Spcification de famille pour les cbles simplex et duplex (CEI 60794-2-10:2011) Lichtwellenleiterkabel - Teil 2-10: LWL-Innenkabel - Familienspezifikation fr Simplex- und Duplexkabel (IEC 60794-2-10:2011) This European Standard was approved by CENELEC on

8、 2011-09-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

9、 be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and no

10、tified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, It

11、aly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60794-2-10:2011EN 60794-2-10:2011 - 2 - Foreword The text of document 86A/1396/FDIS, future edition 2 of IEC 60794-2-10, prepare

12、d by SC 86A, Fibres and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-2-10:2011. This document supersedes EN 60794-2-10:2003. The main changes with respect to EN 60794-2-10:2003 are as follows: A new clause has been introduced:

13、 Clause 4 Dimensions. Test conditions and requirements have been made more accurate. The new Subclause 5.5 has been added to give useful figures. EN 60794-2-10:2011 is to be used in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-2. The following dates are fixed: latest date by which the do

14、cument has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-06-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-09-14 Attention is drawn to the possibility that some of the el

15、ements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60794-2-10:2011 was approved by CENELEC as a European Standard without any modifi

16、cation. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60654-4 IEC 60721-1 IEC 60721-3-3 IEC 61000-6-2 IEC 61918 NOTE Harmonized as EN 60654-4. NOTE Harmonized as EN 60721-1. NOTE Harmonized as EN 60721-3-3. NOTE Harmonized as EN 6100

17、0-6-2. NOTE Harmonized as EN 61918. BS EN 60794-2-10:2011- 3 - EN 60794-2-10:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For date

18、d references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year T

19、itle EN/HD Year IEC 60304 - Standard colours for insulation for low-frequency cables and wires HD 402 S2 - IEC 60793-1-20 - Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry EN 60793-1-20 - IEC 60793-1-21 - Optical fibres - Part 1-21: Measurement methods and test p

20、rocedures - Coating geometry EN 60793-1-21 - IEC 60793-1-40 - Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 - IEC 60793-1-44 - Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength EN 60793-1-44 - IEC 60793-2 - Opti

21、cal fibres - Part 2: Product specifications - General EN 60793-2 - IEC 60793-2-10 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibresEN 60793-2-10 - IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specificati

22、on for class B single-mode fibres EN 60793-2-50 - IEC 60794-1-1 2001 Optical fibre cables - Part 1-1: Generic specification - General EN 60794-1-1 2002 IEC 60794-1-2 2003 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures EN 60794-1-2 2003 IEC 60794-2 - Opti

23、cal fibre cables - Part 2: Indoor cables - Sectional specification EN 60794-2 - IEC 60811-1-1 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1: General application - Measurement of thickness and overall dimensions - Tests for determining the mechan

24、ical properties EN 60811-1-1 - 2 60794-2-10 IEC:2011 CONTENTS FOREWORD . 4 1 Scope . 6 2 Normative references . 6 3 Construction . 7 General . 7 3.1Optical fibres and primary coating . 7 3.2Buffer 7 3.3Ruggedised fibre . 7 3.4Slotted core . 7 3.5Tube 8 3.6Stranded loose tube 8 3.7Ribbon structure 8

25、3.8Strength and anti-buckling members . 8 3.9Ripcord . 8 3.10Sheath 8 3.11Sheath marking . 8 3.12Identification 8 3.13Examples of cable constructions . 8 3.144 Dimensions Optical fibres and primary coating 8 5 Tests 9 General . 9 5.1Dimensions . 9 5.2Mechanical requirements . 9 5.3Tensile performanc

26、e 9 5.3.1Crush 9 5.3.2Impact . 10 5.3.3Bend 10 5.3.4Repeated bending . 10 5.3.5Bending under tension . 10 5.3.6Bending at low temperature . 10 5.3.7Flexing 10 5.3.8Torsion 10 5.3.9Kink . 10 5.3.10Environmental requirements 11 5.4Temperature cycling 11 5.4.1Transmission requirements . 11 5.5Single-mo

27、de optical fibres . 11 5.5.1Single-mode dispersion unshifted (B1.1) optical fibre 12 5.5.2Single-mode dispersion unshifted (B1.3) optical fibre 12 5.5.3Single-mode (B6_a) optical fibre 12 5.5.4Single-mode (B6_b) optical fibre 12 5.5.5Multimode optical fibres . 13 5.5.6Multimode (A1a and A1b) optical

28、 fibres . 13 5.5.7Fire performance . 13 5.6Annex A (informative) Examples of some types of cable construction 14 60794-2-10 IEC:2011 3 Annex B (informative) Family specification of indoor cables simplex and duplex cables . 17 Bibliography 20 Figure A.1 Simplex loose non-buffered fibre cable . 14 Fig

29、ure A.2 Simplex ruggedised fibre cable . 14 Figure A.3 Duplex loose non-buffered fibre cable . 14 Figure A.4 Duplex ruggedised fibre cable . 15 Figure A.5 Duplex ruggedised fibre zip cord . 15 Figure A.6 Duplex flat cable . 15 Figure A.7 Duplex round cable . 16 Figure A.8 Simplex and duplex rectangu

30、lar cables . 16 Table 1 Dimensions of buffered fibres 7 Table 2 Temperature cycling conditions . 11 Table 3 Common single-mode optical fibre requirements . 11 Table 4 Cabled fibre attenuation requirements for B1.1 optical fibre . 12 Table 5 Cabled fibre attenuation requirements for B1.3 optical fibr

31、e . 12 Table 6 Cabled fibre attenuation requirements for B6_a optical fibre 12 Table 7 Cabled fibre attenuation requirements for B6_b optical fibre 12 Table 8 Common multimode optical fibre requirements 13 Table 9 Cabled fibre attenuation requirements for A1a and A1b optical fibres 13 Table B.1 Cabl

32、e description . 17 Table B.2 Cable element 18 Table B.3 Cable construction . 18 Table B.4 Installation and operating conditions 19 Table B.5 Tests applicable . 19 4 60794-2-10 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRE CABLES Part 2-10: Indoor optical fibre cables Family spec

33、ification for simplex and duplex cables FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all que

34、stions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publicatio

35、n(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC col

36、laborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion

37、 on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensu

38、re that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to

39、 the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certificatio

40、n bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall atta

41、ch to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees

42、) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publicatio

43、n. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60794-2-10 has been prepared by sub-committee 86A: Fibres and

44、 cables, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. The main changes with respect to the previous edition are as follows: A new clause has been introduced: Clause 4 Dimensions. Test c

45、onditions and requirements have been made more accurate. The new Subclause 5.5 has been added to give useful figures. This standard is to be used in conjunction with IEC 60794-1-1:2008, IEC 60794-1-2:2007 and IEC 60794-2. 60794-2-10 IEC:2011 5 The text of this standard is based on the following docu

46、ments: FDIS Report on voting 86A/1396/FDIS 86A/1412/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC

47、60794 series, published under the general title Optical fibre cables, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the

48、 specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of

49、 its contents. Users should therefore print this document using a colour printer. 6 60794-2-10 IEC:2011 OPTICAL FIBRE CABLES Part 2-10: Indoor optical fibre cables Family specification for simplex and duplex cables 1 Scope This part of IEC 60794 is a family specification that covers simplex and duplex optical fibre cables for indoor use except for cables used in terminated assemblies specified by IEC 60794-2-50. The requirements of the Se