BS EN 60794-4-20-2012 Optical fibre cables Aerial optical cables along electrical power lines Family specification for ADSS (All Dielectric Self Supported) optical cables《光缆 沿着电力线路.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationOptical fibre cablesPart 4-20: Aerial optical cables along electrical power lines Family specification for ADSS (All Dielectric Self Supported) optical cablesBS EN 60794-4-20:201

2、2Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 60794-4-20:2012. It is identical to IE

3、C 60794-4-20:2012.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/1, Optical fibres and cables.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport

4、 to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013.ISBN 978 0 580 70839 8 ICS 33.180.10 Compliance with a British Standard cannot confer immunity from legal obligati

5、ons.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60794-4-20:2012Copyright European Committee for Electrotechnical Standardization Provided

6、by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 60794-4-20 NORME EUROPENNE EUROPISCHE NORM December 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotech

7、nique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60794-4-20:2012 E ICS 33.180.10 English version Optical fibre cable

8、s - Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All Dielectric Self Supported) optical cables (IEC 60794-4-20:2012) Cbles fibres optiques - Partie 4-20: Cbles optiques ariens installs le long des lignes dnergie lectrique - Spcification de famille po

9、ur les cbles optiques autoports par le dilectrique (ADSS) (CEI 60794-4-20:2012) Lichtwellenleiterkabel - Teil 4-20: Lichtwellenleiter-Luftkabel auf Starkstrom-Freileitungen - Familienspezifikation fr ADSS-LWL-Kabel (dielektrische, selbsttragende LWL-Kabel) (IEC 60794-4-20:2012) This European Standar

10、d was approved by CENELEC on 2012-11-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

11、 such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member

12、into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic o

13、f Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 60794-4-20:2012Copyright European Committee for Elect

14、rotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 60794-4-20:2012 Foreword The text of document 86A/1467/FDIS, future edition 1 of IEC 60794-4-20, prepared by SC 86A “Fibresand cables“ of IEC/TC

15、 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote andapproved by CENELEC as EN 60794-4-20:2012. The following dates are fixed: latest date by which the document has to be implemented at national level bypublication of an identical nationalstandard or by endorsement (dop) 2013-08-29 l

16、atest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-11-29 Attention is drawn to the possibility that some of the elements of this document may be the subject ofpatent rights. CENELEC and/or CEN shall not be held responsible for identifying any or

17、all suchpatent rights. Endorsement notice The text of the International Standard IEC 60794-4-20:2012 was approved by CENELEC as aEuropean Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60060-1:2010 N

18、OTE Harmonised as EN 60060-1:2010 (not modified). IEC 60794 Series NOTE Harmonised as 60794 Series (not modified). IEC 60794-1-2X Series NOTE Harmonised as EN 60794-1-2X Series (not modified).IEC 60794-3 NOTE Harmonised as EN 60794-3. ISO 9001 NOTE Harmonised as EN ISO 9001. BS EN 60794-4-20:2012Cop

19、yright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 60794-4-20:2012 Annex ZA (normative) Normative references to international publicationswith their correspondi

20、ng European publications The following documents, in whole or in part, are normatively referenced in this document and areindispensable for its application. For dated references, only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amend

21、ments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HDapplies. Publication Year Title EN/HD Year IEC 60304 - Standard colours for insulation for low-frequency cables and wires HD 402 S2 - IEC 60793-1-40 - Optical fibre

22、s - Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 - IEC 60793-1-44 - Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength EN 60793-1-44 - IEC 60793-1-48 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polari

23、zation mode dispersion EN 60793-1-48 - IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60794-1-1 - Optical fibre cables - Part 1-1: Generic specification - General EN 60794-1-1 - IEC 60794-1-2 - Optical

24、fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures EN 60794-1-2 - IEC 60794-1-22 - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods EN 60794-1-22 - IEC 60794-1-23 - Optical fibre cables - Part

25、 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods EN 60794-1-23 - IEC 60794-4 - Optical fibre cables - Part 4: Sectional specification - Aerial opticalcables along electrical power lines EN 60794-4 - IEC 61395 - Overhead electrical conductors - Creep tes

26、tprocedures for stranded conductors EN 61395 - BS EN 60794-4-20:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-60794-4-20 IEC:2012(E) CONTENTS 1 Scope .

27、 . 6 2 Normative references . 6 3 Terms, definitions and abbreviations . 7 4 Optical fibres 9 General . 9 4.1Attenuation . 9 4.2Attenuation coefficient . . 9 4.2.1Attenuation discontinuities 9 4.2.2 Cut-off wavelength of cabled fibre 9 4.3Fibre colouring . . 9 4.4Polarisation mode dispersion (PMD) .

28、 . 9 4.55 Cable elements . 9 6 Optical fibre cable constructions . 10 General . . 10 6.1Optical unit . 10 6.2Cable protection elements . 10 6.37 Main requirements for installation and operating conditions . 11 8 Cable design considerations 11 9 Cable tests . 12 General . . 12 9.1Classification of te

29、sts . 12 9.2Type tests . 12 9.2.1Factory acceptance tests 13 9.2.2Routine tests 13 9.2.3 Tensile performance . 13 9.3General . 13 9.3.1Maximum allowed tension (MAT) . . 13 9.3.2 Installation capability 13 9.4General . 13 9.4.1Sheave test . . 13 9.4.2Repeated bending . 14 9.4.3Impact . 14 9.4.4Crush

30、. . 15 9.4.5Kink 15 9.4.6Torsion 15 9.4.7 Vibration testing 16 9.5Aeolian vibration test . . 16 9.5.1Low frequency vibration test (galloping test) . 16 9.5.2 Temperature cycling . 17 9.6Water penetration 18 9.7Weathering resistance 18 9.8BS EN 60794-4-20:2012Copyright European Committee for Electrot

31、echnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-60794-4-20 IEC:2012(E) Tracking and erosion resistance test . 18 9.9Creep behaviour 19 9.10Fitting compatibility . . 19 9.11 10 Factory acceptance tes

32、ts . 19 11 Routine tests 19 12 Quality assurance 20 Annex A (informative) Packaging and marking . 21 Annex B (informative) Installation considerations for ADSS cables. 22 Annex C (informative) Electrical test (TRACKING) . . 23 Annex D (informative) All Dielectric Self-Supported (ADSS) cables to be u

33、sed in overhead power lines (Blank detail specification) 31 Bibliography . 33 Figure C.1 Draft of test equipment . 25 Figure C.2 Test chamber . 25 Figure C.3 Electric scheme for the test . 27 Figure C.4 Details of the sample . . 27 Figure C.5 Nozzle . 28 Figure C.6 Details for the spraying . 29 Figu

34、re C.7 Pollution model . 30 Figure C.8 Basic circuit for arcing test. 30 Table 1 Cable design characteristics 11 Table 2 Optional parameters (if required by customer) . 12 Table C.1 Reqand Ceqvalues for different pollution index values 29 Table D.1 Blank detail specification . 31 BS EN 60794-4-20:20

35、12Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 60794-4-20 IEC:2012(E) OPTICAL FIBRE CABLES Part 4-20: Aerial optical cables along electrical power line

36、s Family specification for ADSS (All Dielectric Self Supported) optical cables 1 Scope This part of IEC 60794, which is a family specification, covers optical telecommunication cables, commonly with single-mode fibres to be used primarily in overhead power lines applications. The cable may also be u

37、sed in other overhead utility networks, such as for telephony or TV services. Requirements of the sectional specification IEC 60794-4 for aerial optical cables along electrical power lines are applicable to cables covered by this standard. NOTE In some particular situations in the electrical industr

38、y, short overhead links can be also designed with multimode fibres. The ADSS cable consists of single-mode optical fibres contained in one or more protective dielectric fibre optic units surrounded by or attached to suitable dielectric strength members and sheaths. The cable does not contain metalli

39、c components. An ADSS cable is designed to meet the optical and mechanical requirements under different types of installation, operating and environmental conditions and loading, as described in Annex B. This standard covers the construction, mechanical, electrical, and optical performance, installa

40、tion guidelines, acceptance criteria, test requirements, environmental considerations, and accessories compatibility for an all dielectric, self-supporting fibre optic (ADSS) cable. The standard provides both construction and performance requirements that ensure, within the guidelines of this standa

41、rd, that the mechanical capabilities of the cable components and maintenance of optical fibre integrity and optical transmissions are proper. This standard excludes any “lashed” or “wrapped” OPAC cables. Cables intended for installation in conformity with ISO/IEC 24702 and related standards may requ

42、ire the specification of additional tests to ensure their suitability in the applicable environments defined by the mechanical, ingress, climatic and chemical, and electromagnetic (MICE) classification. These tests are outside of the scope of IEC 60794 cable specifications, and MICE criteria are not

43、 part of the requirements for IEC 60794 specifications. The MICE tests may be the same as, similar to, or substantially different from, the tests required by IEC 60794 specifications. Cables manufactured per IEC 60794 specifications may or may not meet the MICE criteria. For supplemental discussion,

44、 see IEC/TR 62362. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (

45、including any amendments) applies. IEC 60304, Standard colours for insulation for low-frequency cables and wires IEC 60793-1-40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation BS EN 60794-4-20:2012Copyright European Committee for Electrotechnical Standardization Provid

46、ed by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-60794-4-20 IEC:2012(E) 7 IEC 60793-1-44, Optical fibres Part 1-44: Measurement methods and test procedures Cut-off wavelength IEC 60793-1-48, Optical fibres Part 1-48: Measurement m

47、ethods and test procedures Polarization mode dispersion IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 60794-1-1, Optical fibre cables Part 1: Generic specification General IEC 60794-1-2, Optical fibre cables Part 1-2: Gene

48、ric specification Basic optical cable test procedures 1, 2IEC 60794-1-22, Optical fibre cables Part 1-22: Generic specification Basic optical cable test procedures Environmental test methods IEC 60794-1-23, Optical fibre cables Part 1-23: Generic specification Basic optical cable test procedures Cable element test methods IEC 60794-4, Optical fibre cables Part 4: Sectional Specification Aerial optical cables along electrical power lines IEC 61395, Overhead electrical conductors Creep test procedures for stranded conductors 3 T