BS EN 60811-404-2012 Electric and optical fibre cables Test methods for non-metallic materials Miscellaneous tests Mineral oil immersion tests for sheaths《电缆和光缆 非金属材料的试验方法 杂项试验 护套的.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationElectric and optical fibre cables Test methods for non-metallic materialsPart 404: Miscellaneous tests Mineral oil immersion tests for sheathsBS EN 60811-404:2012National forewor

2、dThis British Standard is the UK implementation of EN 60811-404:2012. It isidentical to IEC 60811-404:2012.In the UK, the relationship between the supersessions of BS EN 60811 seriescan be summarized as follows.Superseded standards are withdrawnThe UK participation in its preparation was entrusted b

3、y Technical CommitteeGEL/20, Electric cables, to Subcommittee GEL/20/17, Electric Cables - Lowvoltage.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are res

4、ponsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 65314 8ICS 29.035.01; 29.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of

5、the StandardsPolicy and Strategy Committee on 31 July 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60811-404:2012BS EN 60811-100 together with Supersedes - -201, -202, -203, -501 BS EN 60811-1-1:1995 -301, -302, -411, -601, -602, -603, -604 BS EN 60811-5-1

6、:2000 -401, -412 BS EN 60811-1-2:1995 -402, -502, -503, -606 BS EN 60811-1-3:1995 -403, -404, -507 BS EN 60811-2-1:1998 -405, -409 BS EN 60811-3-2:1995 -406, -511, -605, -607 BS EN 60811-4-1:2004 -407, -408, -410, -510, -512, -513 BS EN 60811-4-2:2004 -504, -505, -506 BS EN 60811-1-4:1995 -508, -509

7、 BS EN 60811-3-1:1995EUROPEAN STANDARD EN 60811-404 NORME EUROPENNE EUROPISCHE NORM June 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000

8、 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60811-404:2012 E ICS 29.035.01; 29.060.20 Supersedes EN 60811-2-1:1998 (partially) + A1:2001 (partially)English version Electric and optical fibre cables - Test method

9、s for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths (IEC 60811-404:2012) Cbles lectriques et fibres optiques - Mthodes dessai pour les matriaux non-mtalliques - Partie 404: Essais divers - Essais de rsistance lhuile minrale pour les gaines (CEI 6081

10、1-404:2012) Kabel, isolierte Leitungen und Glasfaserkabel - Prfverfahren fr nichtmetallene Werkstoffe - Teil 404: Sonstige Prfungen - lbestndigkeitsprfungen fr Mntel (IEC 60811-404:2012) This European Standard was approved by CENELEC on 2012-04-16. CENELEC members are bound to comply with the CEN/CE

11、NELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre

12、 or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status

13、as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norw

14、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 60811-404:2012 - 2 - Foreword The text of document 20/1288/FDIS, future edition 1 of IEC 60811-404, prepared by IEC/TC 20 “Electric cables“ was submitted to the IEC-CENELEC parallel vote

15、and approved by CENELEC as EN 60811-404:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-01-16 latest date by which the national standards conflicting with the

16、document have to be withdrawn (dow) 2015-04-16 This document supersedes Clause 10 of EN 60811-2-1:1998 + A1:2001 (partially). Full details of the replacements are shown in Annex A of EN 60811-100:2012. There are no technical changes with respect to EN 60811-2-1:1998 + A1:2001, but see the Foreword t

17、o EN 60811-100:2012. This standard is to be read in conjunction with EN 60811-100. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Thi

18、s standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) Endorsement notice The text of the International Standard IEC 60811-404:2012 was approved by CENELEC as a European Standard without any modific

19、ation. BS EN 60811-404:2012- 3 - EN 60811-404:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicatio

20、n. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publica

21、tion Year Title EN/HD Year IEC 60811-100 2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General EN 60811-100 2012 IEC 60811-501 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determi

22、ning the mechanical properties of insulating and sheathing compounds EN 60811-501 - ISO 1817 - Rubber, vulcanized - Determination of the effect of liquids - - BS EN 60811-404:2012 2 60811-404 IEC:2012 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test

23、 method . 6 4.1 General . 6 4.2 Pre-conditioning 6 4.3 Sample and test piece preparation 6 4.4 Determination of the cross-sectional area of the test piece 6 4.5 Oil to be used 7 4.6 Procedure . 7 4.7 Determination of mechanical properties . 7 4.8 Expression of results . 7 5 Test report 7 Bibliograph

24、y 8 BS EN 60811-404:201260811-404 IEC:2012 5 INTRODUCTION The IEC 60811 series specifies the test methods to be used for testing non-metallic materials of all types of cables. These test methods are intended to be referenced in standards for cable construction and for cable materials. NOTE 1 Non-met

25、allic materials are typically used for insulating, sheathing, bedding, filling or taping within cables. NOTE 2 These test methods are accepted as basic and fundamental and have been developed and used over many years principally for the materials in all energy cables. They have also been widely acce

26、pted and used for other cables, in particular optical fibre cables, communication and control cables and cables for ships and offshore applications. BS EN 60811-404:2012 6 60811-404 IEC:2012 ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 404: Miscellaneous tests Miner

27、al oil immersion tests for sheaths 1 Scope This Part 404 of IEC 60811 specifies the method for a mineral oil immersion test, which typically applies to cross-linked compounds used for sheathing materials. 2 Normative references The following documents, in whole or in part, are normatively referenced

28、 in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60811-100:2012, Electric and optical fibre cables Test methods for non-meta

29、llic materials Part 100: General IEC 60811-501, Electric and optical fibre cables Test methods for non-metallic materials Part 501: Mechanical tests Tests for determining the mechanical properties of insulating and sheathing compoundsISO 1817, Rubber, vulcanized Determination of the effect of liquid

30、s 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60811-100 apply. 4 Test method 4.1 General This Part of IEC 60811 shall be used in conjunction with IEC 60811-100. Unless otherwise specified, tests shall be carried out at room temperature. 4.2 Pre-c

31、onditioning All the tests shall be carried out not less than 16 h after the extrusion or cross-linking, if any, of the sheathing compounds. 4.3 Sample and test piece preparation Five test pieces shall be prepared in accordance with the procedures described in IEC 60811-501. 4.4 Determination of the

32、cross-sectional area of the test piece See the test method in IEC 60811-501. BS EN 60811-404:201260811-404 IEC:2012 7 4.5 Oil to be used Unless otherwise agreed, the mineral oil to be used shall be oil no. 2 (IRM 902) as described in ISO 1817. 4.6 Procedure The test pieces shall be immersed in the o

33、il bath, previously heated to the specified test temperature, and shall be maintained in the oil at that temperature for the specified time (see standard for the type of cable). At the end of the specific duration, the test pieces shall be removed from the oil, blotted lightly to remove excess oil a

34、nd suspended in air at ambient temperature for at least 16 h but not more than 24 h, unless otherwise specified in the relevant cable standard. At the end of this period, any further excess oil shall be removed by lightly blotting the test pieces. 4.7 Determination of mechanical properties See the t

35、est method in IEC 60811-501. 4.8 Expression of results The calculation of tensile strength shall be based on the cross-sectional area of the test piece measured before immersion (see 4.2.2). The difference between the median value obtained on the five test pieces immersed in oil and the median value

36、 of the values obtained for the untreated test pieces (see IEC 60811-501), expressed as a percentage of the latter, shall not exceed the percentage specified in the standard for the type of cable. If required by the standard for the material in the relevant standard for the type of cable, the values

37、 found for the aged test pieces shall be calculated, in terms of variation compared to the untreated test pieces according to the following formulae: 100UUET=TTTV (1) 100UUEE=EEEV (2) where VTis the variation of the tensile strength in per cent; TEis the tensile strength of aged test piece; TUis the

38、 tensile strength of untreated test piece; VEis the variation of the elongation at break in per cent; EEis the elongation at break of aged test piece in per cent; EUis the elongation at break of untreated test piece in per cent. NOTE The untreated specimen is kept at room temperature. 5 Test report

39、The test report shall be in accordance with that given in IEC 60811-100. BS EN 60811-404:2012 8 60811-404 IEC:2012 Bibliography IEC 60811-2-1:1998, Insulating and sheathing materials of electric and optical cables Common test methods Part 2-1: Methods specific to elastomeric compounds Ozone resistan

40、ce, hot set and mineral oil immersion test (withdrawn) _ BS EN 60811-404:2012This page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in E

41、urope and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +

42、44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if any

43、one finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 700

44、1BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of stan

45、dards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI wi

46、ll supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996

47、 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information re

48、garding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyri