BS EN 60966-2-7-2016 Radio frequency and coaxial cable assemblies Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz IEC 61169-.pdf

1、BSI Standards PublicationRadio frequency and coaxial cable assembliesPart 2-7: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectorsBS EN 60966-2-7:2016National forewordThis British Standard is the UK implementation of EN 609

2、66-2-7:2016. It is identical to IEC 60966-2-7:2015.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this committee can b

3、e obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 78912 0ICS 33.120.10Compliance

4、 with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60966-2-7:2016EUROPEAN

5、 STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60966-2-7 January 2016 ICS 33.120.10 English Version Radio frequency and coaxial cable assemblies - Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors (IEC 60966-2-7

6、:2015) Ensembles de cordons coaxiaux et de cordons pour frquences radiolectriques - Partie 2-7: Spcification particulire pour cordons de connexion de rcepteurs radio ou TV - Bande de frquences de 0 MHz 3 000 MHz, connecteurs IEC 61169-47 (IEC 60966-2-7:2015) Konfektionierte Koaxial- und Hochfrequenz

7、kabel - Teil 2-7: Bauartspezifikation fr konfektionierte Kabel fr Ton- und Fernsehrundfunkempfnger - Frequenzbereich 0 MHz bis 3 000 MHz, Steckverbinder nach IEC 61169-47 (IEC 60966-2-7:2015) This European Standard was approved by CENELEC on 2015-10-13. CENELEC members are bound to comply with the C

8、EN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management C

9、entre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same st

10、atus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan

11、ia, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische N

12、ormung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60966-2-7:2016 E BS EN 60966-2-7:2016EN 60966-2-7:2016 2 European foreword The text of document 46/530/FDIS

13、, future edition 1 of IEC 60966-2-7, prepared by IEC/TC 46 “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60966-2-7:2016. The following dates are fixed: latest date by wh

14、ich the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-01-22 Attention is drawn to the possibility that some

15、 of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60966-2-7:2015 was approved by CENELEC as a European Standard without a

16、ny modification. BS EN 60966-2-7:2016EN 60966-2-7:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its appl

17、ication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.

18、 NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60966-1 1999 Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test meth

19、ods EN 60966-1 1999 IEC 60966-2-1 2008 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies EN 60966-2-1 2009 IEC 60966-2-2 2003 Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial

20、cable assemblies EN 60966-2-2 2003 IEC 61169-47 - RADIO-FREQUENCY CONNECTORS - part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) EN 61169-47 - IEC 61196-6 - Coaxial communication cables - Part 6: Section

21、al specification for CATV drop cables - - IEC 61196-7 - Coaxial communication cables - Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 15018 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz - - IEC 62153-4-7 - Metallic communication cable test met

22、hods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or coupling attenuation - Tube in tube method EN 62153-4-7 - BS EN 60966-2-7:2016 2 IEC 60966-2-7:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO FREQUENCY AND

23、COAXIAL CABLE ASSEMBLIES Part 2-7: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national

24、electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spe

25、cifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Intern

26、ational, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The form

27、al decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations fo

28、r international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4

29、) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shal

30、l be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certif

31、ication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inju

32、ry, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references c

33、ited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identif

34、ying any or all such patent rights. International Standard IEC 60966-2-7 has been prepared by IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. The text of this standard is based on the following documents: FDIS Report on v

35、oting 46/530/FDIS 46/568/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. BS EN 60966-2-7:2016IEC 60966-2-7:2015 IEC 2015 3 This detail specification is to be read with IEC 60966-1:1999, with IEC 60966-2-1:2008 an

36、d with IEC 60966-2-2:2003. A list of all parts of the IEC 60966 series, under the general title: Radio frequency and coaxial cable assemblies, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the cont

37、ents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The

38、colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 60966-2-7:2016 4 IEC 60966-2-7:2015 IEC 2015 INTRODUCT

39、ION This detail specification applies to flexible coaxial cables described in IEC 61196-6 and IEC 61196-7. It relates to cable assemblies for radio and TV receivers, and in particular to the cable assemblies subfamily F (IEC 61169-47). This detail specification gives subfamily requirements and sever

40、ities which shall be applied. Under qualification approval, the qualification will be conducted in accordance with 12.2 of IEC 60966-2-1:2008 taking into account the specified variants. Only the tests whose results might depend on the variants will be repeated. Under capability approval, the qualifi

41、cation will be conducted on the relating CQCs as defined in 12.3 of IEC 60966-2-1:2008 and described in the CM. Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products; all other tests will be performed on CQCs as defined in 12.3 of I

42、EC 60966-2-1:2008 and described in the CM. Normative references IEC 60966-1:1999, Radio frequency and coaxial cable assemblies Part 1: Generic specification General requirements and test methods IEC 60966-2-1:2008, Radio frequency and coaxial cable assemblies Part 2-1: Sectional specification for fl

43、exible coaxial cable assemblies IEC 60966-2-2:2003, Radio frequency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies IEC 61169-47, Radio-frequency connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coup

44、ling, typically for use in 75 cable networks (type F-Quick) IEC 61196-6, Coaxial communication cables Part 6: Sectional specification for CATV drop cables IEC 61196-7, Coaxial communication cables Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 15018 Indoor drop

45、 cables for systems operating at 5 MHz 3 000 MHz IEC 62153-4-7, Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring the transfer impedance and the screening or the coupling attenuation Tube in tube method BS EN 60966-2-7:2016IEC 60966-2-7

46、:2015 IEC 2015 5 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES Part 2-7: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors 1 Prepared by IEC TC 46 2 Document No. 60966-2-7 Issue: First issue Date: 3 Available from: IEC 3 r

47、ue de Varemb Genve Suisse 4 Generic specification: IEC 60966-1 Sectional specification: IEC 60966-2-1 Blank detail specification: IEC 60966-2-2 5 Additional references: Detail specification for coaxial cable assemblies for radio and TV receivers NOTE Example diagram, manufacturer to insert actual di

48、agram. 6 Maximum diameter 85 dB 30 MHz to 1 000 MHz 75 dB 1 000 MHz to 2 000 MHz 65 dB 2 000 MHz to 3 000 MHz Class B 75 dB 30 MHz to 1 000 MHz 65 dB 1 000 MHz to 2 000 MHz 55 dB 2 000 MHz to 3 000 MHz Voltage proof 8.10 1,0 kV 50 Hz to 65 Hz peak value Insulation resistance 8.11 105M Test voltage 5

49、00 V Inner conductor continuity 8.12 OK Low voltage DC Outer conductor continuity 8.12 10 m After tensile test 9.1 Mechanical Tensile 9.1 45 N Interface OK Duration 1 min Test 8.12 Flexure 9.2 500 cycles Force 5 N 20/min Test 8.9 Flexing endurance 9.3 20 cycles Test 8.12 and 8.9 Cable assembly crushing 9.4 700 N Test 8.3 BS EN 60966-2-7:2016IEC 60966-2-7:2015 IEC 2015 7 Recommended grouping of test Recommended severity 20 Group 2