BS EN 60968-2015 Self-ballasted fluorescent lamps for general lighting services Safety requirements《一般照明用自镇流荧光灯 安全要求》.pdf

1、BSI Standards PublicationSelf-ballasted fluorescent lamps for general lighting services Safety requirementsBS EN 60968:2015National forewordThe UK participation in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/1, Electric lamps.A list

2、of organizations represented on this subcommittee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Li

3、mited 2015ISBN 978 0 580 81045 9ICS 29.140.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2015.Amendments/corrigenda issued since publicationDate Text a

4、ffectedBRITISH STANDARDBS EN 60968:2015This British Standard is the UK implementation of EN 60968:2015. It is derived from IEC 60968:2015 incorporating corrigendum March 2015. It supersedes BS EN 60968:2013+A11:2014 which is withdrawn.The CENELEC common modifications have been implemented at the app

5、ropriate places in the text. The start and finish of each common modification is indicated in the text by tags . The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by IEC corrigendum March 2015 is indicated in the text by .EUROPEAN STANDA

6、RD NORME EUROPENNE EUROPISCHE NORM EN 60968 May 2015 ICS 29.140.30 English Version Self-ballasted fluorescent lamps for general lighting services - Safety requirements (IEC 60968:2015, modified + COR1:2015, modified) Lampes fluorescence ballast intgr pour lclairage gnral - Rgles de scurit (IEC 60968

7、:2015, modifie + COR1:2015, modifie) Leuchtstofflampen mit eingebautem Vorschaltgert fr Allgemeinbeleuchtung - Sicherheitsanforderungen (IEC 60968:2015, modifiziert + COR1:2015, modifiziert) This European Standard was approved by CENELEC on 2015-03-30. CENELEC members are bound to comply with the CE

8、N/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Ce

9、ntre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same sta

10、tus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani

11、a, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische No

12、rmung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60968:2015 E BS EN 60968:2015Foreword The text of document 34A/1811/FDIS, future edition 3 of IEC 60968 prep

13、ared by subcommittee 34A “Lamps”, of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60968:2015. A draft amendment, which covers common modifications to IEC 60968 (34A/1811/FDIS), was prepared by CLC/TC 34A “Lamps“ and approved by

14、CENELEC. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-03-30 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2

15、018-03-30 This document supersedes EN 60968:2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle E

16、lements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60968:2015 + COR1:2015 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 609

17、68:2015 IEC 60968:2015 IEC 2015 2 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refe

18、rences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date info

19、rmation on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60061-1 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps EN 60061-1 - IEC 60061-3 -

20、Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges EN 60061-3 - IEC 60360 - Standard method of measurement of lamp cap temperature rise EN 60360 - IEC 60598-1 - Luminaires Part 1: General requirements and tests EN 60598-1 - IEC 60695-2-10 - F

21、ire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure EN 60695-2-10 - IEC 60695-2-11 2000 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products EN 60695-2-11 2001 IEC 60

22、901 - Single-capped fluorescent lamps - Performance specifications EN 60901 - IEC 61199 - Single-capped fluorescent lamps Safety specifications EN 61199 - IEC 61347-1 2015 Lamp controlgear Part 1: General and safety requirements EN 61347-1 2015 ISO 4046-4 2002 Paper, board, pulps and related terms -

23、 Vocabulary - Part 4: Paper and board grades and converted products 3 BS EN 60968:2015 IEC 60968:2015 IEC 2015CONTENTS FOREWORD . 6 1 Scope 8 2 Normative references. 8 3 Terms and definitions 9 4 General requirements and general test requirements 10 5 Marking . 10 5.1 Lamp marking . 10 5.2 Additiona

24、l marking 10 5.3 Compliance of marking 11 5.4 Locations where marking is required (See Table 1) 12 6 Interchangeability, mass and bending moment . 12 6.1 Interchangeability 12 6.2 Bending moment and mass imparted by the lamp at the lampholder . 12 7 Protection against electric shock 14 8 Insulation

25、resistance and electric strength 15 8.1 General . 15 8.2 Insulation resistance . 15 8.3 Electric strength 15 9 Mechanical strength . 15 9.1 General . 15 9.2 Torsion resistance . 16 Torsion resistance of unused lamps 16 9.2.1Torsion resistance of lamps after a defined time of usage . 18 9.2.29.3 Axia

26、l strength of Edison caps 18 10 Cap temperature rise . 19 11 Resistance to heat . 20 12 Resistance to flame and ignition. 21 13 Fault conditions . 22 13.1 General requirements 22 13.2 Test conditions 22 13.3 Test setup for non-starting lamp 23 14 Creepage distances and clearances . 23 15 Lamp end of

27、 life . 23 15.1 General requirements 23 15.2 Test setup . 23 15.3 Compliance . 24 16 Photobiological safety 24 16.1 UV radiation 24 16.2 Other photobiological effects . 24 17 Abnormal operation . 24 18 Test conditions for dimmable and three-way lamps . 25 19 Whole production assessment 26 20 Collati

28、on of type test verification 26 21 Information for luminaire design . 27 BS EN 60968:2015 IEC 60968:2015 IEC 2015 4 Annex A (informative) Whole production assessment 28 A.1 Assessment General 28 A.2 Whole production assessment by means of the manufacturers records 28 Annex B (informative) Informatio

29、n for luminaire design . 30 B.1 Water contact 30 Bibliography . 31 Figure 1 Dimming not allowed 11 Figure 2 Lamp to be used in dry conditions or in a luminaire that provides protection .11 Figure 3 Sample test arrangement for bending moment imparted by the lamp at the lampholder . 13 Figure 4 Standa

30、rd test finger (according to IEC 60529) . 14 Figure 5 Holder for torsion test on lamps with screw caps . 17 Figure 6 Holder for torsion test on lamps with bayonet caps 17 Figure 7 Test equipment for applying an axial force 19 Figure 8 Ball-pressure apparatus 20 Figure 9 Schematic diagram for non-sta

31、rting lamp test 23 Figure 10 Test circuit for testing a non-dimmable lamp at a dimmer or electronic switch . 25 Table 1 Locations where marking is required 12 Table 2 Bending moments and masses . 13 Table 3 Torsion test values for unused lamps . 18 Table 4 Values for axial force . 19 Table 5 Maximum

32、 cap temperature rise 20 Table 6 Sampling sizes for type test . 26 Table A.1 Production assessment 28 5 BS EN 60968:2015 IEC 60968:2015 IEC 2015INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES SAFETY REQUIREMENTS FOREWORD 1) The International

33、 Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fi

34、elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any I

35、EC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardiza

36、tion (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has represen

37、tation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC ca

38、nnot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publicati

39、ons. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, a

40、ccess to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including i

41、ndividual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance up

42、on, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements

43、 of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60968 has been prepared by subcommittee 34A: Lamps, of IEC technical committee 34: Lamps and related equipment. This third edition

44、 cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition, where additions have been made to the following: a) caps and prevention of cap misuse; b)

45、 interchangeability; c) mechanical and electrical strength; d) creepage distances and clearances; e) end of lamp life precaution; f) abnormal operation; BS EN 60968:2015 IEC 60968:2015 IEC 2015 6 g) test conditions for dimmable and three-way lamps; h) water contact related marking; i) verification,

46、and assessment; j) information for luminaire design in the form of annexes. The text of this third edition is based on the following documents: FDIS Report on voting 34A/1811/FDIS 34A/1838/RVD Full information on the voting for the approval of this standard can be found in the report on voting indic

47、ated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard, the following print types are used: Requirements proper: in roman type. Test specifications: in italic type. Explanatory matter: in smaller roman type. The committee has de

48、cided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amen

49、ded. 7 BS EN 60968:2015 IEC 60968:2015 IEC 2015SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES SAFETY REQUIREMENTS 1 Scope This International Standard specifies the safety and interchangeability requirements, together with the test methods and conditions required to show compliance of tubular fluorescent lamps with integrated means for controlling starting and stable operation (self-ballasted fluorescent lamps). These lamps are i