BS EN 60993-2002 Electrolyte for vented nickel-cadmium cells《有泄漏口的镍镉电池用电解质》.pdf

1、BRITISH STANDARD BS EN 60993:2002 Electrolyte for vented nickel-cadmium cells The European Standard EN 60993:2002 has the status of a British Standard ICS 29.220.30 BS EN 60993:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Com

2、mittee, was published under the authority of the Standards Policy and Strategy Committee on 19 September 2002 BSI 19 September 2002 ISBN 0 580 40370 X National foreword This British Standard is the official English language version of EN 60993:2002. It is identical with IEC 60993:1989. The UK partic

3、ipation in its preparation was entrusted to Technical Committee PEL/21/1, Secondary cells and batteries containing alkaline and other non-acidic electrolytes, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-ref

4、erences The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of Briti

5、sh Standards Online This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present

6、to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover

7、, the EN title page, pages 2 to 12, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60993 NORME EUROPENNE EUROPISCHE NORM July 2002 CEN

8、ELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved wor

9、ldwide for CENELEC members. Ref. No. EN 60993:2002 E ICS 29.220.30 Supersedes HD 585 S1:1991 English version Electrolyte for vented nickel-cadmium cells (IEC 60993:1989) Electrolyte pour lments ouverts au nickel-cadmium (CEI 60993:1989) Elektrolyt fr geschlossene wiederaufladbare Nickel-Cadmium-Zell

10、en (IEC 60993:1989) This European Standard was approved by CENELEC on 2002-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

11、and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp

12、onsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ir

13、eland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.Foreword The text of the International Standard IEC 60993:1989, prepared by SC 21A, Secondary cells and batteries containing alkaline or other non-acid electrolytes, of IEC TC 21,

14、Secondary cells and batteries, was approved by CENELEC as HD 585 S1 on 1991-02-01. This Harmonization Document was submitted to the formal vote for conversion into a European Standard and was approved by CENELEC as EN 60993 on 2002-07-01. The following date was fixed: latest date by which the EN has

15、 to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-07-01 Annexes designated “informative“ are given for information only. In this standard, annexes A and B are informative. _ Endorsement notice The text of the International Standard IEC

16、 60993:1989 was approved by CENELEC as a European Standard without any modification. _ Page2 EN60993:2002CONTENTS Clause Page 1. Scope.4 2. Object 4 3. Definitions4 3.1 Classification of impurities 4 3.2 Filling electrolyte5 3.3 Operating electrolyte .5 3.4 Replacement electrolyte5 4. Preparation of

17、 the electrolyte.5 4.1 Requirements of potassium hydroxide (KOH), solid and liquid, supplied for preparation of electrolytes.5 4.2 Requirements of water used for topping up and preparation of electrolytes 7 4.3 Requirements of solid lithium hydroxide (LiOH, H 2 O ) used as an additive for preparatio

18、n of electrolytes.8 5. Requirements for filling and replacements electrolyte 8 6. Physical and Chemical requirements of electrolyte 9 6.1 Density of electrolyte.9 6.2 Minimum and maximum values of electrolyte density.10 6.3 Purity of the electrolyte10 APPENDIX A11 APPENDIX B12 Page3 EN60993:2002Page

19、4 EN60993:2002Page5 EN60993:2002Page6 EN60993:2002Page7 EN60993:2002Page8 EN60993:2002Page9 EN60993:2002Page10 EN60993:2002Page11 EN60993:2002Page12 EN60993:2002BS EN 60993:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsibl

20、e for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments

21、 or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found o

22、n the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards

23、publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of t

24、hose that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information serv

25、ices are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purcha

26、se price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further in

27、formation about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988

28、 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details suc

29、h as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.