BS EN 61000-6-5-2015 Electromagnetic compatibility (EMC) Generic standards Immunity for equipment used in power station and substation environment《电磁兼容性 (EMC) 通用标准 发电站和变电站环境中使用设备的抗.pdf

1、BSI Standards PublicationElectromagnetic compatibility (EMC)Part 6-5: Generic standards Immunity for equipment used in power station and substation environmentBS EN 61000-6-5:2015National forewordThis British Standard is the UK implementation of EN 61000-6-5:2015. It isidentical to IEC 61000-6-5:201

2、5.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/210, EMC - Policy committee.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users

3、 are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82568 2ICS 33.100.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of th

4、eStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61000-6-5:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61000-6-5 November 2015 ICS 33.100.20 English Version Electromagnetic compatibility (E

5、MC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment (IEC 61000-6-5:2015) Compatibilit lectromagntique (CEM) - Partie 6-5: Normes gnriques - Immunit pour les quipements utiliss dans les environnements de centrales lectriques et de postes (IEC 61

6、000-6-5:2015) Elektromagnetische Vertrglichkeit (EMV) - Teil 6-5: Fachgrundnormen - Strfestigkeit von Betriebsmitteln, Gerten und Einrichtungen, die im Bereich von Kraftwerken und Schaltstationen verwendet werden (IEC 61000-6-5:2015) This European Standard was approved by CENELEC on 2015-09-25. CENE

7、LEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on a

8、pplication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN

9、-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary

10、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique

11、Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61000-6-5:2015 E BS EN 61000-6-5:2015EN 61000-6-5:2015 2 European

12、 foreword The text of document 77/484/FDIS, future edition 1 of IEC 61000-6-5, prepared by IEC/TC 77 “Electromagnetic compatibility“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61000-6-5:2015. The following dates are fixed: latest date by which the document has to be

13、 implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-25 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-09-25 Attention is drawn to the possibility that some of the elements of this d

14、ocument may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential req

15、uirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 61000-6-5:2015 was approved by CENELEC as a European Standard without any modification. In the o

16、fficial version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61000-2 NOTE Harmonized in EN 61000-2 series. IEC 61000-6-4 NOTE Harmonized as EN 61000-6-4. IEC 60255-1:2009 NOTE Harmonized as EN 60255-1:2010 (not modified). IEC 60255-26:2013 NOTE Harmonized

17、as EN 60255-26:2013 (not modified). IEC 61439-1:2011 NOTE Harmonized as EN 61439-1:2011 (not modified). IEC 62271-1:2007 NOTE Harmonized as EN 62271-1:2008 (not modified). IEC 60870-2-1:1995 NOTE Harmonized as EN 60870-2-1:1996 (not modified). IEC 61000-6-2:2005 NOTE Harmonized as EN 61000-6-2:2005

18、(not modified). IEC 61326-1:2012 NOTE Harmonized as EN 61326-1:2013 (not modified). IEC 61812-1:2011 NOTE Harmonized as EN 61812-1:2011 (not modified). BS EN 61000-6-5:2015EN 61000-6-5:2015 3 IEC 61000-4-1 NOTE Harmonized as EN 61000-4-1. IEC 61000-4-12:2006 NOTE Harmonized as EN 61000-4-12:2006 (no

19、t modified). IEC 61000-4-19:2014 NOTE Harmonized as EN 61000-4-19:2014 (not modified). BS EN 61000-6-5:2015EN 61000-6-5:2015 4 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are norm

20、atively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by

21、 common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4

22、-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 2009 IEC 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test EN 61000-4-3 + A1 + A2 2006 2008 2010 I

23、EC 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 2012 IEC 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 20

24、14 IEC 61000-4-6 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields EN 61000-4-6 2014 IEC 61000-4-8 - Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power f

25、requency magnetic field immunity test EN 61000-4-8 2010 IEC 61000-4-11 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests EN 61000-4-11 2004 BS EN 61000-6-5:2015EN 61000-6-5:2015 5 Publicatio

26、n Year Title EN/HD Year IEC 61000-4-16 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz EN 61000-4-16 + A1 + A2 1998 2004 2011 IEC 61000-4-17 - Electromagnetic compa

27、tibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test EN 61000-4-17 + A1 + A2 1999 2004 2009 IEC 61000-4-18 - Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test EN 61000-

28、4-18 + corrigendum Sep. + A1 2007 2007 2010 IEC 61000-4-29 - Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests EN 61000-4-29 2000 IEC 61000-4-34 - Electromagnetic comp

29、atibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase EN 61000-4-34 + A1 2007 2009 IEC 61000-6-1 - Electromagnetic compatibility (EMC) - Part 6-1: Generic sta

30、ndards - Immunity for residential, commercial and light-industrial environments EN 61000-6-1 2007 BS EN 61000-6-5:2015EN 61000-6-5:2015 6 Annex ZZ (informative) Coverage of Essential Requirements of EU Directives This European Standard has been prepared under a mandate given to CENELEC by the Europe

31、an Commission and the European Free Trade Association and within its scope the standard covers essential requirements as given in Annex I Article 1(b) of the EU Directive 2004/108/EC. Compliance with this standard provides one means of conformity with the specified essential requirements of the Dire

32、ctives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 61000-6-5:2015 2 IEC 61000-6-5:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope and object . 7 2 Normative references 8 3 Terms, defini

33、tions and abbreviations . 9 3.1 Terms and definitions 9 3.2 Abbreviations 12 4 Electromagnetic environment . 12 5 Performance criteria 16 6 Conditions during testing . 18 7 Product documentation 19 8 Applicability . 19 9 Measurement uncertainty 20 10 Immunity requirements 20 10.1 General . 20 10.2 I

34、mmunity test requirements for equipment in power stations . 20 10.3 Immunity test requirements for equipment in substations 24 Annex A (informative) Information on electromagnetic phenomena, typical sources and causes 29 Annex B (informative) Overview of the effect of the electromagnetic phenomena o

35、n the functions of equipment and systems . 30 Annex C (informative) Guidelines for protected zones Mitigation of radiated and conducted disturbances 34 C.1 General . 34 C.2 General approach . 34 C.3 Classification of protection zones 35 C.3.1 General . 35 C.3.2 Zone 1 Building shield 36 C.3.3 Zone 2

36、 Room shield 36 C.3.4 Zone 3 Equipment shield 37 C.3.5 Zone 4 Additional protection . 37 C.4 Design principles for shielding 37 C.5 Shielding effectiveness . 37 Annex D (informative) Guidance for the user of this standard . 39 Bibliography 40 Figure 1 Equipment ports . 10 Figure 2 Example of the sit

37、uation of a power station 14 Figure 3 Example of the situation of an air-insulated substation (AIS) 15 Figure 4 Example of the situation of a gas-insulated substation (GIS) 16 Figure C.1 Equipment ports . 34 Figure C.2 Zones of protection of shielding and earthing systems 36 BS EN 61000-6-5:2015IEC

38、61000-6-5:2015 IEC 2015 3 Table 1 Characterization of the electromagnetic phenomena . 13 Table 2 Suggested performance criteria for some representative functions 18 Table 3 Immunity requirements Power station Enclosure port . 21 Table 4 Immunity specifications Power station Signal/control ports 22 T

39、able 5 Immunity specifications Power station Low voltage a.c. input and output power ports . 23 Table 6 Immunity specifications Power station Low voltage d.c. input and output power ports . 24 Table 7 Immunity specifications Substation Enclosure port 25 Table 8 Immunity specifications Substation Sig

40、nal/control ports . 26 Table 9 Immunity specifications Substation Low voltage a.c. input and output power ports . 27 Table 10 Immunity specifications Substation Low voltage d.c. input and output power ports . 28 Table A.1 Electromagnetic phenomena Sources and causes . 29 Table D.1 Immunity tests and

41、 test levels to be considered in the future or for particular product families . 39 BS EN 61000-6-5:2015 4 IEC 61000-6-5:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROMAGNETIC COMPATIBILITY (EMC) Part 6-5: Generic standards Immunity for equipment used in power station and substati

42、on environment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standar

43、dization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation

44、 is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with th

45、e International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects

46、 since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical con

47、tent of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possi

48、ble in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformi

49、ty assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal i