BS EN 61030-1991 Specification for domestic digital bus (D2B) for audio video and audiovisual systems《音频、视频和视听系统用家用数字总线(DZB)规范》.pdf

1、BRITISH STANDARD BS EN 61030:1993 IEC1030:1991 Incorporating Amendment No.1 Specification for Domestic Digital Bus (D2B) for audio, video and audiovisual systems The European Standard EN61030:1993 has the status of a BritishStandard UDC 681.3.02:681.3.037.37BSEN61030:1993 This BritishStandard, havin

2、g been prepared under the directionof the Electronic Equipment Standards Policy Committee, was published underthe authority of the Standards Board and comes intoeffect on 20December1991 BSI01-2000 The following BSI references relate to the work on this standard: Committee reference EEL/32 Draft for

3、comment 88/32207 DC ISBN 0 580 20286 0 Committees responsible for this BritishStandard The preparation of this BritishStandard was entrusted by the Electronic Equipment Standards Policy Committee (EEL/-) to Technical Committee EEL/32, upon which the following bodies were represented: Association for

4、 Consumer Research (ACRE) Association of British Theatre Technicians Audio Engineering Society British Broadcasting Corporation British Educational Equipment Association British Kinematograph Sound and Television Society British Radio and Electronic Equipment Manufacturers Association British Teleco

5、mmunications plc Consumer Policy Committee of BSI Federation of British Audio Independent Broadcasting Authority Independent Television Association Institution of Electrical Engineers National Council for Educational Technology (NCET) Professional Lighting and Sound Association Radio Electrical and

6、Television Retailers Association Royal Institute of British Architects Royal National Institute for the Deaf Society of Cable Television Engineers Sound and Communication Industries Federation Amendments issued since publication Amd. No. Date of issue Comments 7902 October1993 Indicated by a sidelin

7、e in the marginBSEN61030:1993 BSI 01-2000 i Contents Page Committees responsible Inside front cover National foreword iv Foreword 2 1 Scope and main features of the Domestic Digital Bus (D2B) 3 2 Normative reference 3 3 Definitions and abbreviations 4 3.1 Definitions 4 3.2 Abbreviations 4 4 Modes 5

8、5 Main transmission features of D2B 6 5.1 Communication-related functions 6 5.2 Characteristics of transmitted signals 6 6 Frame structure 6 7 Frame exchange protocols 8 7.1 Frame sequences and acknowledgements 8 7.1.1 Write sequence 9 7.1.2 Read sequence 10 7.2 Description of the frame protocol 11

9、7.2.1 Start bit 11 7.2.2 Mode bits 11 7.2.3 Master address bits 12 7.2.4 Slave address bits 12 7.2.4.1 Slave address acknowledge 12 7.2.5 Control bits 12 7.2.5.1 Interpretation of the four control bits 13 7.2.5.2 Control acknowledge 13 7.2.6 Data field 13 7.2.6.1 Data bits 13 7.2.6.2 End of data bit

10、 13 7.2.6.3 Data parity bit 14 7.2.6.4 Data acknowledge bit 14 7.2.7 Acknowledgement data 14 7.2.8 Activating the lock/unlock function 14 7.2.9 Medium access protocol 14 7.2.9.1 Physical characteristics 14 7.2.9.2 Carrier sense 14 7.2.9.3 Collision detection 14 8 Bit formats 14 8.1 General bit forma

11、t 14 8.2 Detailed description of the bit formats 16 8.2.1 Introduction 16 8.2.2 Start bit (see Figure 8) 16 8.2.3 Arbitration bits (see Figure 9) 19 8.2.4 Master to Slave bits (see Figure 10) 23 8.2.5 Slave to Master bits (see Figure 11) 26 9 Address allocation 28 9.1 Address space definition 28BSEN

12、61030:1993 ii BSI 01-2000 Page 9.2 Allocation of AV/C address codes (Service code0001) 29 9.3 Sub-devices 30 10 Data interpretation 32 10.1 Slave status 32 10.2 Lock address 32 10.3 Property memory 33 10.4 Data 33 10.5 Commands 33 10.5.1 Principles of the command table 33 10.5.2 The service classifi

13、cation commands 34 10.5.3 Addressing of sub-devices 34 10.5.4 The “END” command 35 11 Gateway communication 35 11.1 Gateway communication in the Japanese home bus system (HBS) format 36 11.2 Gateway communication in the format specified with the OPR 38 11.3 Gateway addresses 38 12 Command extension

14、38 13 Multiple frame message format 39 14 Electrical specification of a D2B system 39 14.1 Typical circuit configuration (see Figure 21) 40 14.2 Logical and electrical state relationship 40 14.3 Driver specification 40 14.4 Receiver specification 41 14.5 Cable specification 42 Annex A (normative) Th

15、e command table 43 Function commands group 44 Video commands 44 Audio commands 45 Deck/player commands 47 Tuner commands 49 Text function commands 51 Function commands specific 52 Camera video commands 52 Timer commands 53 Annex ZA (normative) Other international publications quoted in this standard

16、 with the references of the relevant European publications 57 National annex NA (informative) Cross-references Inside back cover Figure 1 Configuration 3 Figure 2 Structure of D2B frame 7 Figure 3 Flow chart showing frame exchange protocol 8 Figure 4 Sequence of frame bits during a Master to Slave t

17、ransfer Write action 9 Figure 5 Sequence of frame bits during a Slave to Master transfer Read action 10 Figure 6 Frame format 11 Figure 7 Example of a D2B digital filter 15BSEN61030:1993 BSI 01-2000 iii Page Figure 8 Start bit 19 Figure 9 Arbitration bit 22 Figure 10 Master to Slave bit 25 Figure 11

18、 Slave to Master bit 28 Figure 12 D2B Address Space 29 Figure 13 Typical D2B address for an AV/C device 29 Figure 14 Example of configuration with devices and sub-devices 30 Figure 15 Principles of the command table 34 Figure 16 Frame format of sub-device address 34 Figure 17 Format of SSDA and DSDA

19、 35 Figure 18 D2B as sub system in a configuration with a Home Electronic Bus 36 Figure 19 Format of SA and DA 37 Figure 20 Frame format 39 Figure 21 Reference circuit 40 Figure 22 Driver delay times 41 Figure 23 Receiver delay times 42 Table 1 D2B mode parameters 6 Table 2 Mode bit allocation 12 Ta

20、ble 3 Control code allocation 13 Table 4 Allocation of type codes for AV/C device or sub-device (Service code0001) 31 Table 5 Allocation of type codes for additional devices or sub-devices (Service code0011) 31 Table 6 Slave status bit allocation 32 Table 7 Bit allocation for mid and least significa

21、nt lock address nibbles 32 Table 8 Bit allocation for most significant lock address nibble 33 Table 9 Bit allocation of the OPR associated with the OPC “Begin2” 35 Table 10 SA and DA definition 36 Table 11 Bit allocation of the OPR association with the OPC “Begin1” 36 Table 12 Address allocation of

22、gateways 38BSEN61030:1993 iv BSI 01-2000 National foreword This BritishStandard has been prepared under the direction of the Electronic Equipment Standards Policy Committee and is the English version of EN61030:1993 Audio, video and audiovisual systems Domestic Digital Bus (D2B), published by the Eu

23、ropean Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC1030:1991 and its amendment1:1993, published by the International Electrotechnical Commission (IEC). As a consequence of implementing the European Standard this BritishStandard is renumbered as BS EN61030 and an

24、y reference to BS7536 should be read as a reference to BS EN61030. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunit

25、y from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi toiv, theENtitle page, pages2 to58, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indica

26、ted in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN61030 March1993 UDC 681.3.02:681.3.037.37 Descriptors: Recording apparatus, video recording, sound recording, data recording, appliance interconnections, home electronic systems, data bus, data t

27、ransmission, information interchange, data blocks, mode of data transmission, characteristics, protocols, structures, dimensions Englishversion Audio, video and audiovisual systems Domestic Digital Bus (D2B) (IEC1030:1991+A1:1993) Systmes audio, vido et audiovisuels Bus Numrique Domestique (D2B) (CE

28、I1030:1991+A1:1993) Audio-, Video- und audiovisuelle Anlagen Digitaler Bus fr Heimanwendung (D2B) (IEC1030:1991+A1:1993) This European Standard was approved by CENELEC on 1992-12-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi

29、ng this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official v

30、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees

31、 of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisc

32、hes Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1993 Copyright reserved to CENELEC members Ref. No. EN61030:1993 EEN61030:1993 BSI 01-2000 2 Foreword At the request of the CENELEC Technical Committee TC103, Electronic entertainment and educational sy

33、stems for household and similar use, the International Standard IEC1030:1991+84(C.0.)98 was submitted to the CENELEC Unique Acceptance Procedure (UAP) in February1992 for acceptance as a European Standard. NOTEDocument84(C.0.)98 was published as amendment1 in February1993. The text of the reference

34、document was approved by CENELEC as EN61030 on9 December1992. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex A and Annex ZA are normative. latest date of publication ofan identical national standard (dop)1993-09-15 latest

35、date of withdrawal ofconflicting national standards (dow) 1993-09-15EN61030:1993 BSI 01-2000 3 1 Scope and main features of the Domestic Digital Bus (D2B) This International Standard gives the modes of transmission, the communication protocols, the addressing procedures, the command language and ele

36、ctrical characteristics for the Domestic Digital Bus (D2B) System. The audio-video cluster (TV set, VCR, etc.) needs a practical bus for interconnecting devices and exchanging messages. D2B was developed for this purpose. The capabilities of D2B can be described as follows: It is appropriate for aud

37、io and video, for controllers and for home computers. It can be used as a local independent system for this application or as an audio, video and control subsystem connected via an appropriate gateway to a main bus. Following the same scheme, D2B can also be used as a local independent system or as

38、an integrated subsystem for any other application. In order to allow exchange of digital data in a system made up of devices of various manufacturing origins, it is necessary to have a “standardized communication protocol” suitable for the specific needs of this system. Within the Home Electronic Bu

39、s environment (HEB), D2B can be used as a subsystem. For this reason, the address and command tables for audio, video and control are harmonized with those of the Japanese Home Bus (HBS) and of the European Home Bus (IHS). The structure of the Domestic Digital Bus (D2B), the transmission speeds, the

40、 format and the structure of the frames have therefore been chosen to meet the requirements of the home and small office application area. See Figure 1. In the D2B system, devices perform as masters and slaves during data transfers. A master device is able to initiate and control a data transfer usi

41、ng D2B. Depending on the direction of transfer, devices also perform as transmitters or receivers. The D2B is a multi-master bus, which means that any device capable of controlling the bus can do so. D2B is based on Carrier Sense Multiple Access with Collision Detection (CSMA/CD) with arbitration, b

42、ased on the unique identification of each device. Each transfer is restricted in time to avoid monopolisation of the bus. The bus allows a self-configuring network to be built up. D2B allows devices to contain a number of sub-devices. 2 Normative reference The following standard contains provisions

43、which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibilit

44、y of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC94-5:1988, Magnetic tape sound recording and reproducing systems Part5: Electrical magnetic tape properties. Figure 1 ConfigurationEN61030:1

45、993 4 BSI 01-2000 3 Definitions and abbreviations 3.1 Definitions For the purposes of this International Standard, the following definitions apply: frame block of information, transferred across the D2B data link. The frame consists of the header field, the master address field, the slave address fi

46、eld, the control field and the message field header field field indicating the start of a frame and identifying the mode of a frame (transmission speed) master address field field identifying the device which seeks to take control, this being called the “Master” slave address field field identifying

47、 the device addressed by the master, this being called the “Slave” control field field controlling the direction of the message and defining the interpretation of the message message field field containing data bytes which carry the message master (during a particular frame) device that initiates a

48、D2B frame and controls its timing. Several masters may simultaneously try to initiate a frame, but only one of these masters can gain exclusive access to the medium for the duration of a frame, i.e.be the winning master. D2B devices may or may not be capable of master operation slave (during a parti

49、cular frame) device that responds to a D2B frame, initiated by a master, after being addressed in that frame. All devices capable of slave operation, shall accept and interpret all frames, at least up to and including the slave address field. D2B devices may or may not be capable of slave operation transmitter (during a particular frame) device that transmits the information content of the data fields in that frame. In a D2B frame, either the master or the slave can be the t