BS EN 61050-1992 Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safe.pdf

1、BSI BS*EN*bLOSD DL U Lb24bb 0562382 628 BRITISH STANDARD A Specification for Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) General and safety requirements * * rn The European Standard EN 61050 : 1992 has the status of a

2、 British Standard 5s EN i1050 : 1992 worporating imendment No. 1 NO COPYING WITHOUT BSI PERMISSION EXCEPT As PERMITTED BY COPYRIGHT LAW - I BSI BSMEN*bL050 01 Lb24bb% 05b2383 5bg Amd. No. A BS EN 61050 : 1992 Issue 2, September 1996 Date Cooperating organizations September 1996 9107 The European Com

3、mittee for Electrotechnical Standardization (CENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countries: Indicated by a double line in the margin - - tL- y *7cb s.*- ycAcvd c This British Standard, having been prepared under th

4、e direction of the Electrical Illuminations Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 September 1992 BSI 1992 The following EI references relate to the work on this standard : Cammittee refererce iGL/21 Draft for comment 89/23539

5、 DC ISBN O 580 21 138 X Austria Belgium Denmark Finland France Germany Greece Iceland Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom ! I A BSI BS*EN*b1050 01 W 1624667 05b2384 4TO m Issue 1, September 1996 BS EN 61050 : 1992 Summary of pages The followin

6、g table identifies the current issue of each page. Issue 1 indicates that a page has been introduced for the Grst time by amendment. Subsequent issue numbers indicate an updated page. Double vertical sidelining on replacement pages indicates the most recent changes (amendment, addition deletion). ,

7、Page Front cover Inside front cover a b 1 11 1 2 3 4 5 to 28 I 29 Issue 2 2 1 blank 2 original 2 2 2 original original 2 30 31 32 33 34 35 36 37 38 Inside back cover Back cover Issue original original original original original original original 2 2 original original 0 BSI 1996 a A Issue 2, Septembe

8、r 1996 BS EN 61050 : 1992 Contents Cooperating organizations National foreword page Inside front cover i 3 Foreword I lkxt of EN 61050 3 National annex KA (informative) Original IEC text amended bv CENELEC common modifications Inside back cover National annex NB (informative) Committees responsible

9、Inside back cover National annex NC (informative) Cross-references Inside back cover Nat ional foreword This British Standard has been prepared under the direction of the Electrical Consumer and Process Products Committee and is the English language version of EN 61050 : 1992 and its Amendment 1 : 1

10、995 Transformers for tubular discharge lamps having a no-load output voltage.exceeding 1000 V (generally called neon-transformers) - General and safety requirements published by the European Committee for Electrotechnical Standardization (CENELEC). It was derived by CENELEC from IEC 1050 : 1991 and

11、its Amendment No. 1 : 1994 published by the International Electrotechnical Commission (IEC) of the same title. The foreword of the EN makes reference to date of withdrawal (dow) of conflicting national standards as 1996-07-01. In this case the relevant national standard is BS EN 61050 but the date o

12、f withdrawal relates only to those parts of the British Standard subject to Amendment Al. Certificates and marks will not be awarded after this date with respect to the British Standard not incorporating Amendment Al. They will be awarded only to the amended British Standard. However, such certifica

13、tes and marks already awarded with respect to the British Standard not incorporating Amendment A2 may continue to apply for production until 2001-07-01. The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by a sideline in the margin. parts o

14、f the original IEC text which do not form part of the text of EN 61050 have been quoted in national annex NA. The following print types are used in this standard: - requirements proper: in roman type; - test specif - notes: in smaller roman type. Compliance with a British Standard does not of itself

15、 confer immunity from legai obligations. OBSI 1996 I BSI BS*EN*bL50 01 1624669 0562386 273 A EUROPEAN STAkDARD EN 61050 NORME EUROPENNE June 1992 EUROPISCHE NORM +Al November 1995 UDC 628.97.041.7-2 621.327.43 : 621.314.21 620.1 : 614.8 Supersedes HD 388 S2 : 1983 Descriptors: Lighting equipment, el

16、ectric lamp, discharge lamp, tubular lamp, transformer, classification, safety requirement, electrical property, degree of protection, marking English version Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) General and sa

17、fety requirements (IEC 1050 : 1991 + Corrigendum March 1992, modified) (includes amendment Al : 1995) Transformateurs pour lampes tubulaires dcharge ayant une tension secondaire vide Transformatoren mit einer Leerspannung ber 1000 V fr Leuchtrhren (allgemein - suprieure 1000 V (couramment appels Neo

18、ntransformatoren gennant) - E transformateurs-nen) Allgemeine und Sicherheits-Anforderungen e - Prescriptions gnrales et de scurit (CE1 1050 : 1991 + corrigendum mars 1992, modifie) (inclut lamendement Al : 1995) (IEC 1050 : 1991 + Corrigendum Mrz 1992, modifiziert) (enthlt nderung Al : 1995) _. - -

19、 * * m This European Standard was approved by CENELEC on 1992-03-24; amendment Al was approved by CENELEC on 15 May 1995. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wi

20、thout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lang

21、uage made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greec

22、e, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat:

23、rue de Stassart 35, B-1050 Brussels 1992 Copyright reserved to CENELEC members Ref. No. EN 61050 : 1992 E + Al : 1995 BSI BS*EN*bLOSO 01 W 3624669 0562387 LOT m- - Issue 2, September 1996 EN 61050 : 1992 Foreword At the request of the secretary of CENELEC Technical Committee IC 342, Luminaires and a

24、ssociated equipment, the International Standard IEC 1050 : 1991 was submitted to the CENELEC Unique Acceptance Procedure (UAP) in June 1991 for acceptance as a European Standard. The reference document and its corrigendum March 1992, together with some common modifications agreed by 71 Technical Boa

25、rd, were approved by CENELEC as EN 61050 on 24 March 1 992. EN 61050 supersedes HD 388 S2 : 1983. The following dates were fixed: latest date of (dop) 1993-03-01 publication of an identical national standard withdrawal of conflicting national standards latest date of (dow) 1993-03-01 For products wh

26、ich have complied with HD 388 S2 : 1983 before 1993-03-01, as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until 1998-03-01. Annexes designated normative are part of the body of the standard. In this standard, annex ZA is normative

27、. Foreword to amendment Al The text of amendment 1 : I994 to the International Standard IEC 1050 : 1991, prepared by SC 34C, Auxiliaries for discharge lamps, of IEC TC 34, Lamps and related equipment, together with common modifications prepared by the Technical Committee CENELEC TC 342, Luminaires a

28、nd associated equipment, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment Al to EN 61050 : 1992 on 1995-05-15. The following dates were fixed: - latest date by (dop) 1996-07-01 which the amendment has to be implemented at national level by publication of an i

29、dentical national standard or by endorsement which the national standards conflicting with the amendment have to be withdrawn - latest date by (dow) 1996-07-01 For products which have complied with EN 61050 : 1992 before 1996-07-01, as shown by the manufacturer or by a certification body, this previ

30、ous standard may continue to apply for production until 2001-07-01. Annexes designated informative are given for information only. In this standard, annex D is informative. , 0 BSI 1996 A * * rn BSI BS*EN*bL050 01 D 162466% 0562388 O46 =- Issue 2, September 1996 Page 3 EN 61050 : 1992 CONTENTS Page

31、SECTION 1 - GENERAL REQUIREMENTS Clause 1 General 4 1.1 Scope . 4 1.2 Normative references 5 2 Definitions 5 3 General requirements . 7 4 General notes on tests 8 5 Rating 9 6 Classification . 10 7 Marking . 10 . . SECTION 2 - SAFETY REQUIREMENTS 8 Electrical characteristics 9 Magnetic influence 10

32、Heating 11. Endurance 12 Degrees of protection . 13 Voltage across series capacitors 14 Moisture resistance . 15 Insulation resistance and electric strength 16 Construction . 17 Connection of the conductors . 18 Provision for earthing 19 Screws, current-carrying parts and connections 20 Creepage dis

33、tances and clearances 21 Insulating materials . 22 Resistance to corrosion . 12 13 13 16 18 19 19 20 21 24 24 25 25 27 28 Annexes . A - Information on wiring rules 29 B - Transformers with connecting leads 31 37 3% . . C - Guidance for conformity of production tests 35 D (informative) . Systems used

34、 in Japan and North America . ZA (normative) - Other international publications quoted in this standard with the references of the relevant European publications Il . 36 Figures BSI 1996 TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1 o00 V (generally called neon

35、-transformers) General and safety requirements SECTION 1: GENERAL REQUIREMENTS 1 General 1.1 scope This International Standard is applicable to independent and built-in single-phase transformers with separate input and output windings, for use on a.c. supply up to 1 o00 V at 50 Hz or 60 Hz, to suppl

36、y and stabil- ize cold cathode tubular lamps (or assemblies of such lamps) having a no-load rated output voltage exceeding 1 o00 V but not exceeding 10 o00 V (see notes 1 and 2) and intended for lighting an for electric advertising signs, light signais and similar purposes. In order to ensure the sa

37、fety of these transformers, it is necessary to check their performance. But since no standardization of the character- istics of these lamps exists, reference loads are defined in this standard to ensure reproducible test results. In locations where special conditions prevail, as in ships, vehicles

38、and the like, and in dangerous locations, for example, where explosions are liable to occur, special constructions may be required. This standard does not apply to transformers intended for the supply of lamps or tubes such as low-pressure or high-pressure sodium vapour lamps, high-pressure mercury

39、vapour lamps, halogen lamps, xenon lamps, hot cathode tubular fluorescent lamps, special lamps for document copying machines, etc. This standard does not apply to auto-transformers and electronic conver- tors. This standard may, nevertheless, serve as a guide for transformers with applications other

40、 than those specified in the scope, for instance transformers for photographic lamps, as long as their characteristics remain within the framework of those specified in the scope and they are not the subject of a particular IEC standard. Capacitors shall comply with IEC 1048, where applicable. BSI B

41、S*EN*bL050 01 162466% 0562390 7T4 Page 5 EN 61050 : 1992 NOTES 1 See definition of 2.9 2 Other limits may be specified in national standards or wiring rules, see annex A. Tests in this standard are type tests. Guidance on routine testing is given in annex C. 1 .2 Normative references The following s

42、tandards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged

43、 to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 main- tain registers of currently valid International Standards. IEC standards IEC 112: 1979, Method for determining the comparative and the proof tracking indices of solid i

44、nsulating materials under moist conditions 1EC 417: 1973, Graphical symbols for use on equipment. Index, survey and compilation of the single sheets. I EC 529: 1989, Degrees of protection provided by enclosures IP Code). IEC 598-1 : 1986, Luminaires - Part I: General requirements and tests. Amendmen

45、t No. 1 (1988). IEC 695-2-1 : 1980, Fire hazard testing - Part 2: Test methods. Glow-wire test and guidance. I EC 81 7: 1984, Spring-operated impact-test apparatus and its calibration. IEC 1048: 1990, Capacitors for use in tubular fluorescent and other dis- charge lamp circuits. General and safety r

46、equirements. /SO Standard IS0 3: 1973, Preferred numbers - Series of preferred numbers. 2 Definitions Unless otherwise specified, r.m.s. values are implied. 2.1 rated values: Values (of voltage, of current, etc.) for which the transformer is constructed and which are indicated by the manufacturer on

47、 the nameplate of the transformer. BSI BS*EN*b1050 O3 W Lb24bb9 O562393 b30 M Page 6 EN 61050 : 1992 2.2 short-circuit current: Current between output terminals when joined together at rated input voltage and frequency. 2.3 independent transformer: Transformer consisting of one or more separate unit

48、s which can be mounted separately outside a luminaire, without any additional enclosure. This may consist of a built-in trans- former housed in a suitable enclosure which provides all the necessary protection according to its marking. 2.4 built-in transformer: Transformer consisting of one or more s

49、eparate units exclusively designed to be built into a luminaire, a box, an enclosure, or the like. 2.5 short-circuit proof transformer: Transformer in which the temperature rise does not exceed the specified limits when the transformer is over- loaded or short-circuited, and which remains capable of functioning after the overload is removed. 2.6 inherently short-circuit proof transformer: Transformer in which the temperature in the case of overload or short-circuit and in the absence of a protective device does not exceed the specifie