BS EN 61069-2-2016 Industrial-process measurement control and automation Evaluation of system properties for the purpose of system assessment Assessment methodology《工业过程测量、控制和自动化 系.pdf

1、Industrial-process measurement,control and automation Evaluation of system propertiesfor the purpose of system assessmentPart 2: Assessment methodologyBS EN 61069-2:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK i

2、mplementation of EN 61069-2:2016. It is identical to IEC 61069-2:2016. It supersedes BS EN 61069-2:1994 which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/65, Measurement and control, to Subcommittee GEL/65/1,System considerations.A list of organizatio

3、ns represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 97

4、8 0 580 85993 9ICS 25.040.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITIS

5、H STANDARDBS EN 61069-2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61069-2 October 2016 ICS 25.040.40 Supersedes EN 61069-2:1994 English Version Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Asses

6、sment methodology (IEC 61069-2:2016) Mesure, commande et automation dans les processus industriels - Apprciation des proprits dun systme en vue de son valuation - Partie 2: Mthodologie appliquer pour lvaluation (IEC 61069-2:2016) Leittechnik fr industrielle Prozesse - Ermittlung der Systemeigenschaf

7、ten zum Zweck der Eignungsbeurteilung eines Systems - Teil 2: Methodik der Eignungsbeurteilung (IEC 61069-2:2016) This European Standard was approved by CENELEC on 2016-07-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

8、 European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three officia

9、l versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnic

10、al committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slo

11、vakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 C

12、ENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61069-2:2016 E BS EN 61069-2:2016EN 61069-2:2016 2 European foreword The text of document 65A/790/FDIS, future edition 2 of IEC 61069-2, prepared by SC 65A “System aspects” of IEC/TC 65

13、 “Industrial-process measurement, control and automation” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61069-2:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standa

14、rd or by endorsement (dop) 2017-04-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-10-28 This document supersedes EN 61069-2:1994. Attention is drawn to the possibility that some of the elements of this document may be the subject of paten

15、t rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61069-2:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the

16、 following notes have to be added for the standards indicated: IEC/TS 62603-1:2014 NOTE Harmonized as CLC/TS 62603-1:2014. IEC 60584-1:2013 NOTE Harmonized as EN 60584-1:2013 (not modified). IEC 61069-4 NOTE Harmonized as EN 61069-4. IEC 61709 NOTE Harmonized as EN 61709. ISO 9001:2015 NOTE Harmoniz

17、ed as EN ISO 9001:2015. BS EN 61069-2:2016EN 61069-2:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its a

18、pplication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD appli

19、es. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 61069-1 2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of sys

20、tem assessment - Part 1: Terminology and basic concepts EN 61069-1 2016 BS EN 61069-2:2016 2 IEC 61069-2:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references. 8 3 Terms, definitions, abbreviated terms, acronyms, conventions and symbols 8 3.1 Terms and definitions 8 3

21、.2 Abbreviated terms, acronyms, conventions and symbols 8 4 Assessment approach 8 5 Assessment method 9 5.1 Overview. 9 5.1.1 General . 9 5.1.2 Phases 9 5.2 Defining the objectives of the assessment 10 5.3 Design and layout of the assessment . 11 5.3.1 Defining the scope of assessment 11 5.3.2 Syste

22、m properties and influencing factors . 11 5.3.3 Collation of documented information . 13 5.3.4 Documenting collated information . 14 5.3.5 Selecting assessment items . 14 5.3.6 Assessment specification . 14 5.4 Planning of the assessment program 14 5.4.1 Overview . 14 5.4.2 Developing assessment act

23、ivities . 15 5.4.3 Assessment program 16 5.5 Execution of the assessment 16 5.6 Reporting of the assessment . 16 6 Evaluation techniques 17 Annex A (informative) System Requirements Document (SRD) . 18 A.1 Overview. 18 A.2 Analysis of system mission 18 A.2.1 General . 18 A.2.2 Formulation of system

24、mission . 18 A.2.3 Analysis of system mission into tasks . 18 A.2.4 Assignment of relative importance to tasks 19 A.2.5 Defining influencing factors . 19 A.3 Review of system requirements document (SRD) 19 Annex B (informative) System Specification Document (SSD) . 20 B.1 Overview. 20 B.2 Developmen

25、t of system specification document 20 B.2.1 General . 20 B.2.2 System overview 20 B.2.3 Defining system boundaries 21 B.2.4 Specification of system 21 B.2.5 Description of system operation 21 B.2.6 Statement of system implementation rationale . 22 BS EN 61069-2:2016IEC 61069-2:2016 IEC 2016 3 B.2.7

26、Statement of compliance with system requirements . 22 Annex C (informative) Examples of collation documentation 23 C.1 Overview. 23 C.2 Example of furnace control documentation . 23 C.2.1 Schematic of task . 23 C.2.2 Task definition . 23 C.2.3 Input characteristics . 23 C.2.4 Output characteristics

27、24 C.2.5 Operational functions . 25 C.2.6 Monitoring functions . 25 C.2.7 Configuration . 25 C.2.8 Flexibility . 25 C.2.9 Functionality collation tables 26 C.3 Example of simple control loop task documentation 32 C.3.1 Overview . 32 C.3.2 Schematic of task . 32 C.3.3 Information flows 32 C.3.4 Perfo

28、rmance tables 32 C.3.5 Performance collation tables 33 C.4 Example of collation documentation (from SRD of a master-slave control task) . 35 C.4.1 Overview . 35 C.4.2 Schematic of task . 35 C.4.3 Boundary states . 35 C.5 Example of collation documentation (from SSD of a master-slave control task) .

29、36 Bibliography . 38 Figure 1 General layout of IEC 61069 . 7 Figure 2 Assessment matrix . 12 Figure C.1 Control block 23 Figure C.2 Task schematic . 32 Figure C.3 Schematic of task . 35 Table 1 Assessment phases, inputs and outputs . 10 Table C.1 SRD coverage analysis 26 Table C.2 SRD configurabili

30、ty analysis . 28 Table C.3 SRD flexibility analysis . 30 Table C.4 Performance for information flow 32 Table C.5 Information translation 33 Table C.6 Performance collation . 34 Table C.7 Failure states of task input and output 36 Table C.8 Dependability . 37 BS EN 61069-2:2016 4 IEC 61069-2:2016 IEC

31、 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT Part 2: Assessment methodology FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for

32、 standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publish

33、es International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may par

34、ticipate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement b

35、etween the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publica

36、tions have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for

37、 any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the correspond

38、ing national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any s

39、ervices carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC

40、National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attenti

41、on is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC

42、shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61069-2 has been prepared by subcommittee 65A: System aspects, of IEC technical committee 65: Industrial-process measurement, control and automation. This second edition cancels and replaces the f

43、irst edition published in 1993. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Reorganization of the material of IEC 61069-2:1993 to make the overall set of standards more organized and consist

44、ent; b) IEC TS 62603-1:2014 has been incorporated into this edition. BS EN 61069-2:2016IEC 61069-2:2016 IEC 2016 5 The text of this standard is based on the following documents: FDIS Report on voting 65A/790/FDIS 65A/799/RVD Full information on the voting for the approval of this standard can be fou

45、nd in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61069 series, published under the general title Industrial-process measurement,control and automation Evaluation of system prop

46、erties for the purpose of system assessment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At

47、this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users shoul

48、d therefore print this document using a colour printer. BS EN 61069-2:2016 6 IEC 61069-2:2016 IEC 2016 INTRODUCTION IEC 61069 deals with the method which should be used to assess system properties of a basic control system (BCS). IEC 61069 consists of the following parts: Part 1: Terminology and bas

49、ic concepts Part 2: Assessment methodology Part 3: Assessment of system functionality Part 4: Assessment of system performance Part 5: Assessment of system dependability Part 6: Assessment of system operability Part 7: Assessment of system safety Part 8: Assessment of other system properties Assessment of a system is the judgement, based on evidence, of the suitability of the system for a specific mission or class of missions. To obtain total evidence would require c