BS EN 61076-3-122-2017 Connectors for electrical and electronic equipment Product requirements Detail specification for 8-way shielded free and fixed connectors for I O and Gigabit.pdf

1、Connectors for electrical and electronic equipment - Product requirementsPart 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (IEC 61076-3-122:2017)BS EN 61076-3-122:2017BSI Standards PublicationWB11885_BSI_St

2、andardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-3-122 September 2017 ICS 31.220.10 English Version Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed con

3、nectors for I/O and Gigabit Ethernet applications in harsh environments (IEC 61076-3-122:2017) Connecteurs pour quipements lectriques et lectroniques - Exigences de produit - Partie 3-122 : Spcification particulire pour les fiches et les embases crantes 8 voies pour applications E/S et Gigabit dans

4、les environnements svres (IEC 61076-3-122:2017) Steckverbinder fr elektrische und elektronische Einrichtungen - Produktanforderungen - Teil 3-122: Bauartspezifikation fr geschirmte freie und feste Steckverbinder, 8-polig, fr I/O- und Gigabit-Anwendungen in rauen Umgebungen (IEC 61076-3-122:2017) Thi

5、s European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref

6、erences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of

7、 a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Y

8、ugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotec

9、hnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. N

10、o. EN 61076-3-122:2017 E National forewordThis British Standard is the UK implementation of EN 61076-3-122:2017. It is identical to IEC 61076-3-122:2017. It supersedes PD IEC/PAS 61076-3-122:2015 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/48,

11、Electromechanical components and mechanical structures for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its cor

12、rect application. The British Standards Institution 2017Published by BSI Standards Limited 2017ISBN 978 0 580 91559 8ICS 31.240; 31.220.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy a

13、nd Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 610763122:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-3-122 September 2017 ICS 31.220.10 English Version Connectors for electrical and electronic equipmen

14、t - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (IEC 61076-3-122:2017) Connecteurs pour quipements lectriques et lectroniques - Exigences de produit - Partie 3-122 : Spcificatio

15、n particulire pour les fiches et les embases crantes 8 voies pour applications E/S et Gigabit dans les environnements svres (IEC 61076-3-122:2017) Steckverbinder fr elektrische und elektronische Einrichtungen - Produktanforderungen - Teil 3-122: Bauartspezifikation fr geschirmte freie und feste Stec

16、kverbinder, 8-polig, fr I/O- und Gigabit-Anwendungen in rauen Umgebungen (IEC 61076-3-122:2017) This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

17、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (Englis

18、h, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of A

19、ustria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slo

20、venia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All

21、 rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61076-3-122:2017 E BS EN 610763122:2017EN 61076-3-122:2017 2 European foreword The text of document 48B/2554/FDIS, future edition 1 of IEC 61076-3-122, prepared by SC 48B “Electrical connectors“,

22、 of IEC/TC 48 “Electrical connectors and mechanical structures for electrical and electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61076-3-122:2017. The following dates are fixed: latest date by which the document has to be implemented at national le

23、vel by publication of an identical national standard or by endorsement (dop) 2018-03-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-26 Attention is drawn to the possibility that some of the elements of this document may be the subject

24、of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61076-3-122:2017 was approved by CENELEC as a European Standard without any modification. BS EN 610763122:2017EN 61076-3-122:2017 2 Eur

25、opean foreword The text of document 48B/2554/FDIS, future edition 1 of IEC 61076-3-122, prepared by SC 48B “Electrical connectors“, of IEC/TC 48 “Electrical connectors and mechanical structures for electrical and electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CE

26、NELEC as EN 61076-3-122:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-26 latest date by which the national standards conflicting with the document have to

27、 be withdrawn (dow) 2020-06-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 6107

28、6-3-122:2017 was approved by CENELEC as a European Standard without any modification. EN 61076-3-122:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that so

29、me or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common m

30、odifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-581 - International Electrotechnical Vocabulary (IEV) - Par

31、t 581: Electromechanical components for electronic equipment - - IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - IEC 60068-2-38 - Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test EN 60068-2-38 - IEC 60512-1 - Connectors

32、for electronic equipment - Tests and measurements - Part 1: General EN 60512-1 - IEC 60512-1-1 - Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 - IEC 60512-1-2 - Connectors for electronic equipment - Tests and m

33、easurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass EN 60512-1-2 - IEC 60512-2-1 - Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method E

34、N 60512-2-1 - IEC 60512-3-1 - Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance EN 60512-3-1 - BS EN 610763122:2017EN 61076-3-122:2017 4 Publication Year Title EN/HD Year IEC 60512-4-1 - Connectors for electronic equipment - Te

35、sts and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof EN 60512-4-1 - IEC 60512-5-2 - Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating EN 60512-5-2 - IEC 60512-6-3 - Connectors for

36、 electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock EN 60512-6-3 - IEC 60512-6-4 - Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) EN 60512-6-4 - IEC 60512-9-1 - Connectors fo

37、r electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation EN 60512-9-1 - IEC 60512-11-3 - Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state EN 60512-11-3 - IEC 60512-11-4 - Co

38、nnectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature EN 60512-11-4 - IEC 60512-11-7 - Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test EN 60

39、512-11-7 - IEC 60512-11-9 - Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat EN 60512-11-9 - IEC 60512-11-10 - Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold EN 60512-11-10 - IEC

40、60512-13-2 - Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operating tests - Test 13b: Insertion and withdrawal forces EN 60512-13-2 - IEC 60512-15-6 - Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test

41、 15f: Effectiveness of connector coupling devices EN 60512-15-6 - IEC 60512-26-100 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g EN 60512-26-

42、100 - BS EN 610763122:2017EN 61076-3-122:2017 4 Publication Year Title EN/HD Year IEC 60512-4-1 - Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof EN 60512-4-1 - IEC 60512-5-2 - Connectors for electronic equipment - Tests and meas

43、urements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating EN 60512-5-2 - IEC 60512-6-3 - Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock EN 60512-6-3 - IEC 60512-6-4 - Connectors for electronic equipmen

44、t - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) EN 60512-6-4 - IEC 60512-9-1 - Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation EN 60512-9-1 - IEC 60512-11-3 - Connectors for electro

45、nic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state EN 60512-11-3 - IEC 60512-11-4 - Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature EN 60512-11-4 - IEC 60512-11-7 - Co

46、nnectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test EN 60512-11-7 - IEC 60512-11-9 - Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat EN 60512-11-9 - IEC 6051

47、2-11-10 - Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold EN 60512-11-10 - IEC 60512-13-2 - Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operating tests - Test 13b: Insertion and withdrawal forces EN 6

48、0512-13-2 - IEC 60512-15-6 - Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices EN 60512-15-6 - IEC 60512-26-100 - Connectors for electronic equipment - Tests and measurements - Part 26-100: M

49、easurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g EN 60512-26-100 - EN 61076-3-122:2017 5 Publication Year Title EN/HD Year IEC 61076-1 2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification EN 61076-1 2006 IEC 61076-3 - Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification EN 610