BS EN 61076-4-102-1997 Connectors with assessed quality for use in d c low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail speci .pdf

1、BRITISH STANDARD BS EN 61076-4-102: 1997 IEC 61076-4-102: 1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Part 4: Printed board connectors Section 102: Detail specification for two-part single-pole connectors, for multiple us

2、es on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 The European Standard EN 61076-4-102:1997 has the status of a British Standard ICS 31.220.10BSEN61076-4-102:1997 This British Standard, having been prepared under the direction

3、of the ElectrotechnicalSector Board, was published under the authorityof the Standards Boardand comes into effect on 15 October 1997 BSI 09-1999 ISBN 0 580 27731 3 National foreword This British Standard is the English language version of EN61076-4-102:1997. It is identical with IEC61076-4-102:1997.

4、 The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: aid enquirers to understand the text; present to the responsibl

5、e international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on requ

6、est to its secretary. From 1 January 1997, all IEC publications have the number60000 added to the old number. For instance, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both sy

7、stems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The BritishStandards which implement these international or European publicat

8、ions may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of B

9、ritish Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summaryof pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 38, an inside back

10、 cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN61076-4-102:1997 BSI 09-1999 i Contents Page N

11、ational foreword Inside front cover Foreword 2 Text of EN 61076-4-102 7ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-4-102 June 1997 ICS 31.220.10 Englishversion Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications

12、 Part 4: Printed board connectors Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 (IEC 61076-4-102:1997) Connecteurs sous assurance de la

13、qualit, pour utilisation dans le cadre dapplications analogiques en courant continu et basse frquence et dans le cadre dapplications numriques utilisant des dbits levs pour le transfert des donnes Partie 4: Connecteurs pour cartes imprimes Section 102: Spcification particulire pour connecteurs monob

14、roches en deux parties, usage multiple sur cartes imprimes, aux possibilits de centrage avanc, de codage et daccouplement avanc, au pas mtrique salon la CEI 60917 (CEI 61076-4-102:1997) Steckverbinder mit bewerteter Qualitt fr Gleichspannungs- und Niederfrequenz- anwendungen sowie digitale Anwendung

15、en mit hoher bertragungsrate Teil 4: Steckverbinder fr gedruckte Schaltungen Hauptabschnitt 102: Bauartspezifikation fr indirekte einpolige Steckverbinder fr vielfache Anwendungen auf steckbaren Baugruppen mit Vorzentrierung, Kodierung und Voreilung im metrischen Raster nach IEC 60917 (IEC 61076-4-1

16、02:1997) This European Standard was approved by CENELEC on 1997-03-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog

17、raphical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

18、of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherland

19、s, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1997 CENELEC A

20、ll rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-4-102:1997 EEN61076-4-102:1997 BSI 09-1999 2 Foreword The text of document 48B/509/FDIS, future edition1 of IEC61076-4-102, prepared by SC48B, Connectors, of IECTC48, Electromechanical co

21、mponents and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN61076-4-102 on1997-03-11. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is no

22、rmative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC61076-4-102:1997 was approved by CENELEC as a European Standard without any modification. latest date by which the EN has to be implemented at national level by publication of an identical natio

23、nal standard or by endorsement (dop)1998-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow)1998-01-01EN61076-4-102:1997 BSI 09-1999 3 Contents Page Foreword 2 1 General data 7 1.1 Recommended method of mounting 7 1.2 Ratings and characteristics 7 1.3

24、 Normative references 8 1.4 Marking 9 1.5 IEC type designation 9 1.6 Ordering information 9 2 Technical data 10 2.1 Definitions 10 2.2 Survey of styles and variants 10 2.2.1 Survey of termination variants 10 2.2.2 Survey of coding devices 11 2.3 Information on application 11 2.3.1 Complete connector

25、s (pairs) 11 2.3.2 Arrangement on printed board 11 2.3.3 Mounting and termination 12 2.3.4 Coding devices 12 3 Dimensional information 13 3.1 General 13 3.2 Isometric view and common features 14 3.2.1 Common features 14 3.2.2 Reference system 14 3.2.3 Height dimensions 15 3.2.4 Width and depth dimen

26、sions 16 3.3 Mating information 16 3.3.1 Engaging direction 16 3.3.2 Perpendicular to engaging direction 17 3.3.3 Inclination 17 3.4 Fixed board connectors 18 3.4.1 Dimensions of the guiding pin 18 3.4.2 Dimensions of the guiding device 18 3.4.3 Terminations 19 3.5 Free board connectors 19 3.5.1 Dim

27、ensions of the contact box 19 3.5.2 Dimensions of the guiding device 20 3.5.3 Terminations 20 3.6 Accessories 21 3.6.1 Dimensions of coding devices 21 3.7 Mounting information for fixed board connectors 24 3.8 Mounting information for free board connectors 25 3.9 Gauges 26 Page 3.9.1 Sizing and rete

28、ntion force gauges 26 3.9.2 Test pin for probe damage test 26 4 Characteristics 26 4.1 Climatic category 26 4.2 Electrical category 27 4.2.1 Current-carrying capacity 27 4.2.2 Contact resistance 27 4.3 Mechanical category 27 4.3.1 Mechanical operation 27 4.3.2 Engaging and separating forces 27 4.3.3

29、 Static load, transverse 28 4.3.4 Gauge retention force 28 4.3.5 Vibration (sinusoidal) 28 4.3.6 Shock 28 4.3.7 Robustness and effectiveness of coding devices 29 5 Test schedule 29 5.1 General 29 5.1.1 Layout of test printed circuit boards 29 5.1.2 Arrangement for contact resistance measurement 30 5

30、.1.3 Arrangement for dynamic stress tests 31 5.1.4 Arrangement for testing static load, transverse 31 5.1.5 Arrangement for flammability test 31 5.2 Test schedule tables 32 5.2.1 Group P Preliminary 32 5.2.2 Group A Dynamic/climatic 32 5.2.3 Group B Mechanical endurance 35 5.2.4 Group C Moisture 36

31、5.2.5 Group D Electrical load 36 5.2.6 Group E Mechanical resistivity 36 5.2.7 Group F Chemical resistivity 37 5.2.8 Group G Connections 37 6 Quality assessment procedures 37 6.1 Qualification approval testing 37 6.1.1 Method 1 37 6.1.2 Method 2 37 6.2 Quality conformance inspection 37 6.2.1 Lot-by-

32、lot tests 37 6.2.2 Periodic tests 38 6.3 Delayed delivery, re-inspection 38 Annex ZA (normative) Normative references to international publications with their corresponding European publications Inside back coverEN61076-4-102:1997 4 BSI 09-1999 Page Figure 1 Recommended method of mounting 7 Figure 2

33、 Matching coding devices and colours 11 Figure 3 Examples of arrangements (for information only) 12 Figure 4 Fixed and free connectors with coding devices fitted 13 Figure 5 Co-ordination dimensions in the metric equipment practice 14 Figure 6 Example of connector height position in the 25 mm equipm

34、ent practice (for information only) 15 Figure 7 Height dimensions (detail) 15 Figure 8 Width and depth dimensions 16 Figure 9 Contact range 16 Figure 10 Allowed misalignment in height and width directions 17 Figure 11 Allowed inclination in height and width directions 17 Figure 12 Dimensions of the

35、fixed contact part 18 Figure 13 Dimensions of the fixed guiding device 18 Figure 14 Screw dimensions 19 Figure 15 Dimensions of the free contact part 19 Figure 16 Dimensions of the free guiding device 20 Figure 17 90 angled press-in terminations 20 Figure 18 Dimensions of fixed coding devices 21 Fig

36、ure 19 Dimensions of coding devices with colour code yellow (Y) 22 Figure 20 Dimensions of free coding devices 23 Figure 21 Example of hole pattern on backplane in the 25 mm equipment practice (for information only) 24 Figure 22 Example of hole pattern on printed board in the 25 mm equipment practic

37、e (for information only) 25 Figure 23 Sizing and retention force gauges for female contacts 26 Figure 24 Test pin for probe damage test 26 Figure 25 Current-carrying capacity Derating curve 27 Figure 26 Test printed circuit boards 30 Figure 27 Points of connection for contact resistance measurement

38、30 Figure 28 Fixture for dynamic stress tests 31 Page Figure 29 Arrangement for static load, transverse 31 Figure 30 Arrangement for flammability test 31 Table 1 Termination variants 10 Table 2 Co-ordination dimensions and common features in the metric equipment practice 14 Table 3 Climatic category

39、 26 Table 4 Number of mechanical operations 27 Table 5 Vibration 28 Table 6 Shock 28 Table 7 Number of specimens for inspection and test sequence 29 Table 8 Group P: Preliminary testing sequence 32 Table 9 Group A: Dynamic/climatic testing sequence 32 Table 10 Group B: Mechanical endurance testing s

40、equence 35 Table 11 Group D: Electrical load testing sequence 36 Table 12 Group E: Mechanical resistivity testing sequence 36 Table 13 Number of specimens and permitted defectives 37 Table 14 Assessment levels and AQL values 37 Table 15 Periodic tests, number of specimens and permitted defectives 38

41、 Table 16 Re-inspection of delayed delivery 38EN61076-4-102:1997 BSI 09-1999 5 IEC SC 48B Connectors IEC 61076-4-102 Specification available from: IEC Central Office QC 480301XX0003 ELECTRONIC COMPONENTS OF ASSESSED QUALITY DETAIL SPECIFICATION in accordance with IEC 61076-1 Two-part single-pole con

42、nectors for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917. Generally, two pairs of connectors are used, one at the top edge and one at the bottom edge of the plug-in unit. Performance levels (PL): 1, 2 Assessmen

43、t level: A Information on the availability of components qualified to this detail specification is given in the Qualified products list.6 blankEN61076-4-102:1997 BSI 09-1999 7 1 General data Throughout this specification dimensions are in millimetres. 1.1 Recommended method of mounting The free boar

44、d connector has14press-in terminations, which assure the mechanical fixation on the printed board. The fixed board connector is bolted on, through a hole in the backplane. The coding configuration is set by mounting the correct coding devices in their correct positions on the connectors. Generally,

45、two pairs of connectors are used, one at the top edge and one at the bottom edge of the plug-in unit. They fit between the plug-in unit guides of the subrack and the ends of the multipole connector(see2.3.2). 1.2 Ratings and characteristics Figure 1 Recommended method of mounting Current rating: 15

46、A at 85 C Climatic category: PL1: 55/125/56 PL2: 55/125/21 Printed board: hole diameter: plated-through hole 0,94 mm to 1,09 mm board thickness: 1,4 mm min. Backplane: hole diameter: plated-through hole 2,75 mm to 2,85 mm board thickness: see2.2.1. Mechanical coding: blocking force 250 N min. blocki

47、ng distance: 15 mm before the stop of the plug-in unit.EN61076-4-102:1997 8 BSI 09-1999 1.3 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this section of IEC61076-4. At the time of publication, the editions i

48、ndicated were valid. All normative documents are subject to revision, and parties to agreements based on this section of IEC61076-4, are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain register

49、s of currently valid International Standards. IEC 60068-1:1988, Environmental testing Part 1: General and guidance. Amendment 1 (1992) IEC 60326-3:1991, Printed boards Part 3: Design and use of printed boards. IEC 60352-5:1995, Solderless connections Part 5: Solderless press-in connections General requirements, test methods and practical guidance. IEC 60410:1973, Sampling plans and procedures for inspect