1、BRITISH STANDARD BS EN 61083-1:2001 IEC 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests Part 1: Requirements for instruments The European Standard EN 61083-1:2001 has the status of a British Standard ICS 17.220.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS P
2、ERMITTED BY COPYRIGHT LAWBS EN 61083-1:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 14 September 2001 BSI 14 September 2001 ISBN 0
3、 580 38417 9 National foreword This British Standard is the official English language version of EN 61083-1:2001. It is identical with IEC 61083-1:2001. It supersedes BS EN 61083-1:1993 which will be withdrawn on 2004-03-01. The UK participation in its preparation was entrusted to Technical Committe
4、e PEL/42, Testing techniques for high voltages and currents, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC
5、27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this docum
6、ent may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of Br
7、itish Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for chang
8、e, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 34, an annex ZA page and a back cover. The BSI copyright date dis
9、played in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 61083-1 NORME EUROPENNE EUROPISCHE NORM July 2001 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electro
10、technique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61083-1:2001 E ICS 17.220.20; 19.080 Supersedes EN 61083-1:
11、1993 and HD 479 S1:1986 English version Instruments and software used for measurement in high-voltage impulse tests Part 1: Requirements for instruments (IEC 61083-1:2001) Appareils et logiciels utiliss pour les mesures pendant les essais de choc haute tension Partie 1: Prescriptions pour les appare
12、ils (CEI 61083-1:2001) Messgerte und Software bei Stospannungs- und Stostromprfungen Teil 1: Anforderungen an Messgerte (IEC 61083-1:2001) This European Standard was approved by CENELEC on 2001-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the c
13、onditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists i
14、n three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrote
15、chnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 61083-1:2001 - 2 - Foreword The text of document 42/164/FDIS, future edition 2 of IE
16、C 61083-1, prepared by IEC TC 42, High- voltage testing techniques, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61083-1 on 2001-03-01. This European Standard supersedes EN 61083-1:1993 and HD 479 S1:1986. The following dates were fixed: latest date by which the E
17、N has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-03-01 Annexes designated “normative“ are part of the body of the standard.
18、 Annexes designated “informative“ are given for information only. In this standard, annexes A, B, C and ZA are normative and annex D is informative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61083-1:2001 was approved by CENELEC as a European
19、Standard without any modification. _ Page2 BSEN610831:2001 14September2001XXXXX NE:YYYY 3- ISB 1002-70 CONTENTS Page FOREWORD2 1 General.5 1.1 Scope.5 1.2 Normative references.5 1.3 Terms and defitions6 1.3.1 General definitions.6 1.3.2 Definitions specific for digital recorders and analogue oscillo
20、scopes7 1.3.3 Definitions specific for digital recorders.7 1.4 Operating conditions9 1.5 Calibration and test methods9 1.5.1 Impulse calibration.9 1.5.2 Step calibration10 1.5.3 Constancy of scale factor within time interval11 1.5.4 Time base11 1.5.5 Rise time11 1.5.6 Voltage deflection characterist
21、ic of analogue oscilloscopes11 1.5.7 Determination of static differential and integral non-linearities.12 1.5.8 Differential non-linearity under dynamic conditions.12 1.5.9 Internal noise level.12 1.5.10 Interference.12 1.6 Input impedance.13 2 Digital recorders for impulse tests.13 2.1 Requirements
22、 for impulse measurements13 2.1.1 Requirements for digital recorders used in approved measuring systems.13 2.1.2 Individual requirements.13 2.1.3 Requirements for digital recorders used in reference measuring systems15 2.1.4 Tests15 2.1.5 Record of performance17 3 Analogue oscilloscopes for impulse
23、tests.18 3.1 Requirements for impulse requirements18 3.1.1 Requirements for analogue oscilloscopes used in approved measuring systems.18 3.1.2 Individual requirements.18 3.1.3 Tests19 3.1.4 Record of performance20 4 Peak voltmeters for impulse tests.21 4.1 Requirements for impulse measurements21 4.1
24、.1 General requirements for peak voltmeters.21 4.1.2 Individual requirements.21 4.1.3 Tests22 4.1.4 Record of performance23 Page3 BSEN610831:2001 14September2001PD 66:270210 2- ISB 1002-70 Annex A (normative) Procedure for determination of non-linearities of a digital recorder.27 Annex B (normative)
25、 Electromagnetic interference in high-voltage laboratories30 Annex C (normative) Calibration method for analogue oscilloscopes Separate calibration of voltage and time.33 Annex D (informative) Analysis of impulse waveform34 Annex ZA (normative) Normative references to international publications with
26、 their corresponding European publications35 Figure 1 Integral non-linearity s(k) at code k24 Figure 2 Differential non-linearity d(k) and code bin width w(k) under d.c. conditions24 Figure 3 Calibration by comparison.25 Figure 4 Separate calibration of voltage and time25 Figure 5 Step calibration26
27、 Figure A.1 Determination of non-linearities29 Figure B.1 Current injection into the shield of the cable.32 Figure B.2 Application of electric and magnetic fields32 Table 1 Operating conditions9 Table 2 Requirements for reference impulse generators.10 Table 3 Tests required for digital recorders16 T
28、able 4 Tests required for analogue oscilloscopes.19 Table 5 Tests required for peak voltmeters22 Page4 BSEN610831:2001 14September200161083-1 IEC:2001 11 INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENT IN HIGH-VOLTAGE IMPULSE TESTS Part 1: Requirements for instruments 1 General 1.1 Scope This part of
29、IEC 61083 is applicable to digital recorders, including digital oscilloscopes, analogue oscilloscopes and peak voltmeters used for measurements during tests with high impulse voltages and high impulse currents. It specifies the measuring characteristics and calibrations required to meet the measurin
30、g uncertainties and procedures specified in IEC 60060-2. This part defines the terms specifically related to digital recorders, analogue oscilloscopes and peak voltmeters, specifies the necessary requirements for such instruments to ensure their compliance with the requirements for high-voltage and
31、for high-current impulse tests, and establishes the tests and procedures necessary to demonstrate their compliance. Only digital recorders that permit access to raw data from permanent or temporary storage are covered by this standard. The raw data, with relevant scaling information, may be printed
32、graphically, or stored in digital format. 1.2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 61083. For dated references, subsequent amendments to, or revisions of, any of these publications d
33、o not apply. However, parties to agreements based on this part of IEC 61083 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members
34、 of IEC and ISO maintain registers of currently valid International Standards. IEC 60060-1:1989, High-voltage test techniques Part 1: General definitions and test requirements IEC 60060-2:1994, High-voltage test techniques Part 2: Measuring systems Amendment 1 (1996) IEC 61000-4-4:1995, Electromagne
35、tic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical fast transient/burst immunity test. Basic EMC Publication Page5 BSEN610831:2001 14September200161083-1 IEC:2001 13 1.3 Terms and definitions For the purposes of this part of IEC 61083, the following terms and de
36、finitions apply. 1.3.1 General definitions 1.3.1.1 digital recorder instrument, including a digital oscilloscope, which can make a temporary digital record of a high-voltage or high-current impulse, that can be converted into a permanent record. The digital record can be displayed in the form of an
37、analogue graph NOTE The waveform may be displayed on a screen, plotted or printed. This process may change the appearance of the waveform due to the processing involved. 1.3.1.2 analogue oscilloscope instrument, which can make a temporary analogue record of a scaled high-voltage or high- current imp
38、ulse, that can be converted into a permanent record. The permanent record can be displayed in the form of a graph or photograph of the screen of the oscilloscope 1.3.1.3 peak voltmeter instrument, which can measure the peak value of a scaled high-voltage or high-current impulse without short-duratio
39、n overshoot or high-frequency oscillation (see clause 4) 1.3.1.4 warm-up time time interval from when the instrument is first switched on to when the instrument meets operational requirements 1.3.1.5 operating range range of input voltage for which the instrument can be used within the uncertainty l
40、imits given in this standard 1.3.1.6 output of an instrument 1.3.1.6.1 output of a digital recorder numerical value recorded by a digital recorder at a specific instant 1.3.1.6.2 output of an analogue oscilloscope deflection of the trace of an analogue oscilloscope at a specific instant 1.3.1.6.3 ou
41、tput of a peak voltmeter display of a peak voltmeter 1.3.1.7 offset output of an instrument for zero input Page6 BSEN610831:2001 14September200161083-1 IEC:2001 15 1.3.1.8 full-scale deflection minimum input voltage, which produces the nominal maximum output of the instrument in the specified range
42、1.3.1.9 non-linearity of amplitude deviation of the actual output of an instrument from the nominal value, which is determined by dividing the input voltage by the scale factor NOTE The static non-linearity for a d.c. input voltage may be different from the non-linearity under dynamic condition. 1.3
43、.1.10 scale factor factor by which the output corrected for offset is multiplied in order to determine the measured value of the input quantity. The scale factor includes the ratio of any built-in or external attenuator and is determined by calibration 1.3.1.10.1 static scale factor scale factor for
44、 a direct voltage input 1.3.1.10.2 impulse scale factor scale factor for an input representing the shape of the relevant impulse 1.3.2 Definitions specific for digital recorders and analogue oscilloscopes 1.3.2.1 rise time time interval within which the response to an applied step passes from 10 % t
45、o 90 % of its steady-state amplitude 1.3.2.2 time-scale factor factor by which the interval measured from the record is multiplied in order to determine the value of that time interval 1.3.2.3 non-linearity of time base variation of the time-scale factors measured in different parts of the trace or
46、digital record from their mean value 1.3.3 Definitions specific for digital recorders 1.3.3.1 rated resolution r rated resolution is expressed by the reciprocal of two to the power of the rated number of bits N of the A/D converter, namely r = 2 N 1.3.3.2 sampling rate number of samples taken per un
47、it of time NOTE The sampling time interval is the reciprocal of the sampling rate. Page7 BSEN610831:2001 14September200161083-1 IEC:2001 17 1.3.3.3 record length duration of the record expressed either in a time unit or as the total number of samples 1.3.3.4 raw data original record of sampled and q
48、uantized information obtained when a digital recorder converts an analogue signal into a digital form The correction of the output for offset to give a zero-based record is permitted, as is multiplying the record by a constant scale factor. Records processed in this way are still considered as raw d
49、ata NOTE 1 This information may be made available in binary, octal, hexadecimal or decimal form. NOTE 2 The scaling information relevant to the digital record should also be stored. 1.3.3.5 processed data data obtained by any processing (other than correction for offset and/or multiplying by a constant scale factor) of the raw data NOTE Digital recorders, which do not allow access to the raw data, are not covered by this
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1