BS EN 61104-1993 Compact disc video system - 12 cm CD-V《小型视盘录像系统 12cm CD-V》.pdf

1、BRITISH STANDARD BS EN 61104:1993 IEC 1104:1992 Compact disc video system12cm CD-V The European Standard EN61104:1992 has the status of a BritishStandard UDC 621.396.7:681.85.025:621.397.4BSEN61104:1993 This BritishStandard, having been prepared under the directionof the Electronic Equipment Standar

2、ds Policy Committee, was published underthe authority of the Standards Board and comes intoeffect on 15January1993 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference EEL/22 Draft for comment90/20093 DC ISBN 0 580 21520 2 Cooperating organizations The Eu

3、ropean Committee for Electrotechnical Standardization (CENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countries: Austria Italy Belgium Luxembourg Denmark Netherlands Finland Norway France Portugal Germany Spain Greece Sweden

4、Iceland Switzerland Ireland United Kingdom Amendments issued since publication Amd. No. Date CommentsBSEN61104:1993 BSI 01-2000 i Contents Page Cooperating organizations Inside front cover National foreword ii Foreword 2 Text of EN61104 3 National annex NA (informative) Committees responsible Inside

5、 back cover National annex NB (informative) Cross-references Inside back coverBSEN61104:1993 ii BSI 01-2000 National foreword This BritishStandard has been prepared under the direction of the Electronic Equipment Standards Policy Committee and is the English language version of EN61104:1992 Compact

6、disc video system12cm CD-V, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC1104:1992, published by the International Electrotechnical Commission (IEC). This BritishStandard specifies the implementation of video information as an option to

7、BS7064. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document co

8、mprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to10, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EURO

9、PEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN61104 September1992 UDC 621.396.7:681.85.025:621.397.4 Descriptors: Videodisks, compact discs, optical disks, characteristics, specifications, measurement method English version Compact disc video system12cm CD-V (IEC1104:1992) Systme de vidodisque com

10、pact12cm CD-V (CEI1104:1992) Compact-Disc-Video-System12-cm-CD-V (IEC1104:1992) This European Standard was approved by CENELEC on1992-03-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a

11、national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A versi

12、on in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, Fr

13、ance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Ce

14、ntral Secretariat: rue de Stassart 35, B-1050 Brussels 1992 Copyright reserved to CENELEC members Ref.No.EN61104:1992EEN61104:1992 BSI 01-2000 2 Foreword The text of document60A(CO)142, as prepared by Sub-Committee60A: Sound recording, of IEC Technical Committee No.60: Recording, was submitted to th

15、e IEC-CENELEC parallel vote in July1991. The reference document was approved by CENELEC as EN61104 on24March1992. The following dates were fixed: For products which have complied with the relevant national standard before1993-06-01, as shown by the manufacturer or by a certification body, this previ

16、ous standard may continue to apply for production until1998-06-01. Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Contents Page Foreword 2 1 Scope 3 2 Normative references 3 7 Recording parameters 3 Annex ZA (normative) Other internation

17、al publications quoted in this standard with the references of the relevant European publications 10 Figure 17 9 latest date of publication ofan identical national standard (dop)1993-06-01 latest date of withdrawal ofconflicting national standards (dow)1993-06-01EN61104:1992 BSI 01-2000 3 1 Scope Th

18、is International Standard is applicable to a pre-recorded optical reflective disc system called “compact disc video (CD video)” containing digital audio and “Laser vision” video information. In the case of CD video the subclauses mentioned in this standard shall modify the relevant text in IEC908. 2

19、 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication of this standard, the editions indicated were valid. All normative documents are subject to revision, and

20、 parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC856:1986, Pre-recorded o

21、ptical reflective videodisk system. “Laser vision”50Hz/625 lines PAL. IEC857:1986, Pre-recorded optical reflective videodisk system. “Laser vision”60Hz/525 lines M/NTSC. IEC908:1987, Compact disc digital audio system. 4.2 Requirements for the measuring pick-up Change: numerical aperture (NA):0,50 0,

22、01. 5.7 Mass of disc: 14g to20g 7 Recording parameters 7.1 Rotation during playback (see Figure 17) Requirements 7.1.2 a) Audio Video Video NTSC PAL Scanning velocity 1,2m/smin. 11m/smin. 9,2m/smin. CLV 1,4m/smax. 12m/smax. 10,2m/smax. 7.1.2 b) Maximum number of revolutions/s Not specified 45,1 37,6

23、 7.1.2 c) Number of revolutions/s in video lead-in area CAV 45 0,1 37,5 0,1 7.1.3 Limits for the velocity variation on any one disc 0,01m/s Not specified Not specified 7.1.4 Maximum time base error (peak-to-peak) at rotational frequency 12,54s a 154s a Roll-off for higher frequencies 12dB/oct. 12dB/

24、oct. 7.1.5 For frequencies1000Hz maximum time base noise 3nsr.m.s. 3nsr.m.s. Integration time To be fixed To be fixed a Remark: time base errors have to be measured on the “colour burst”.EN61104:1992 4 BSI 01-2000 Replace 7.2 by the following: Replace 7.3 by the following: Parameters Requirements Me

25、thods and/or conditions of measurement Audio Video 7.2 Track 7.2.1 Track path Continuous spiral from inside (start of lead-in) to outside (end of lead-out of video with digital audio) of the disc. Track interruption allowed between audio and video part for which an area of maximum204m width with und

26、efined pit structure is allowed 7.2.2 7.2.3 7.2.4 7.2.5 a 7.2.5 b 7.2.6 Starting diameter of lead-in area Starting diameter of program area Maximum diameter of program area Outer diameter of audio lead-out area Minimum outer diameter of video lead-out area Pitch of track: distance between any two ad

27、jacent turns 46mmmax. 74mm 75 0,2mm 1,6 0,14m Outer diameter of audio lead-out area+404m (max.) 78 0,2mm 116mm Outer diameter of program area plus1mm 1,7 0,24m Parameters Requirements Methods and/or conditions of measurement 7.3 Limits for deviations of information layer perpendicular to reference p

28、lane Audio part Video part 7.3.1 7.3.1.1 7.3.1.2 7.3.1.3 7.3.2 For frequencies Deviation from nominal value RMS value Acceleration For frequencies Deviation Below500Hz 0,5mm 0,4mmmax. 10m/s 2 max. Exceeding500Hz 24m peak-to-peak max. Below1000Hz 0,5mm 0,4mmmax. 40m/s 2 max. Exceeding1000Hz 24m peak-

29、to-peak max. 7.4 Limits for radial deviations of the track 7.4.1 7.4.1.1 7.4.1.2 7.4.2 For frequencies Radial run-out of tracks(4m) Radial acceleration (m/s 2 ) For frequencies Below500Hz 1404m peak-to-peak max. 0,4m/s 2max. Exceeding500Hz See10.4 Below2500Hz 1404m peak-to-peak max. 20m/s 2max. Exce

30、eding2500Hz 50 0 0,4mmEN61104:1992 BSI 01-2000 5 Delete in 10.3 (Sensitivity to radial offset) the sentence: The sensitivity shall be within0,04 and0,07 and substitute: The sensitivity for the audio part shall be between0,04 and0,07 and for the video part between0,04 and0,11. Delete10.4 and substitu

31、te: 10.4 Noise The noise in the push-pull tracking signal is measured in the closed loop situation in a frequency band fromf(low) to f(high) with a servo bandwidth f(servo) (see Figure5, page42 of IEC908). The r.m.s. value of the noise in the residual error signal shall correspond to a tracking erro

32、r of less than0,034m, integration time=20ms (to be fixed). Add to clause 10 the following subclauses: 10.5 Signals in the video part The signals in the video part are defined in Sections3 and4 of IEC856 and IEC857 for PAL and NTSC respectively. The following modifications in these standards are appl

33、icable: 10.5.1 Analog audio (clauses 7 and 8 of section3) The analog audio carriers are removed completely. 10.5.2 Digital audio or data 10.5.2.1 Digital audio or data shall be added according to IEC857, second edition (under consideration), for NTSC and IEC856, second edition (under consideration)

34、for PAL. 10.5.2.2 Average block error rate The BLER as specified shall be8% (averaged over any10s) in the video part; it is recommended to keep the BLER3%. 10.5.3 24-bit biphase code signal10 (clause10 of section3) The program status code in the24-bit code shall not-be used. 10.5.4 40-bit FM coded s

35、ignal (clause10 of section3 of IEC857, NTSC only) The40-bit code shall not be used. Add to subclause 17.5: ADR:0100:ADR4, mode4 for DATA-Q Add to subclause 17.5 (before 17.5.1): Both the lead-in track of the audio part and the lead-in track of the video part contain the Table of Contents(TOC). The T

36、OC contains information about all audio tracks (the Audio TOC) and about all video tracks (theVideoTOC). See examples. If ADR=0001 (mode1), then the subcode block contains information about an audio track. If ADR=0100 (mode4), then the subcode block contains information about a video track. (Seeprop

37、osednew subclause17.5.4.) Subcode blocks with information about audio tracks and subcode blocks with information about video tracks are placed in alternating order, each block being repeated three times. The Audio TOC and the Video TOC are repeated continuously during the lead-in areas. As soon as o

38、ne of these TOCs is completed, the same TOC is repeated immediately. (See also example1 ofTOC.) In the lead-in tracks mode1 and mode4 each occupy at least3 out of10 successive subcode blocks. Audio part Video part f(low) 500Hz 2500Hz f(high) 10000Hz 10000Hz f(servo) 200Hz 1000HzEN61104:1992 6 BSI 01

39、-2000 During the lead-in tracks POINT, PMIN, PSEC and PFRAME are defined according to17.5.1. Furthermore: If ADR=1 and POINT=A0 the value of PMIN gives the tracknumber of the first audio track on the disc, PSEC and PFRAME=00. If ADR=1 and POINT=A1 the value of PMIN gives the tracknumber of the last

40、audio track on the disc, PSEC and PFRAME=00. If ADR=4 and POINT=A0 the value of PMIN gives the tracknumber of the first video track on the disc. PFRAME contains a video system identification code and PSEC=00. If ADR=4 and POINT=A1 the value of PMIN gives the tracknumber of the last video track on th

41、e disc, PSEC and PFRAME=00. The video identification code has the following meaning: 10=NTSC “video single” with digital stereo sound; 11=NTSC “video single” with digital bilingual sound; 12=NTSC “LV disc” with digital stereo sound; 13=NTSC “LV disc” with digital bilingual sound; 20=PAL “video singl

42、e” with digital stereo sound; 21=PAL “video single” with digital bilingual sound; 22=PAL “LV disc” with digital stereo sound; 23=PAL “LV disc” with digital bilingual sound. During both lead-in tracks the other POINT codes give the starting times of the audio tracknumbers in absolute time of the audi

43、o part and the starting times of the video tracknumbers in absolute time of the video part. Tracknumbers shall always increase by1 from the innerside of the disc to the outerside of the disc. In the video part, the video tracknumbers shall be the same as the chapter numbers in the24-bit code. Chapte

44、r numbers are mandatory. The synchronization between the tracknumbers and the chapter numbers shall be video frame accurate. The tracknumbers are: audio or video lead-in track: 00 audio tracknumbers: 0179 video tracknumbers: audio or video lead-out track: AA EN61104:1992 BSI 01-2000 7 Example1 of TO

45、C In this example the general outline of the TOC is described. * Each subcode block is repeated three times.EN61104:1992 8 BSI 01-2000 Example2 of TOC In this example the way of asynchronous mixing of Audio TOC and Video TOC is described in the case of two audio tracks and one video track. Only ADR

46、and POINT are mentioned in the example. Add new subclause: 17.5.4 Mode4 for DATA-Q ADR=4=(0100) Mode4 occupies at least9 out of10 successive subcoding blocks. Mode4 has the same structure as mode1, so the tracknumber indexnumber and the absolute and relative time codes are defined according to the d

47、escription in17.5.1. In the video area, the absolute time is restarted at zero. ADR POINT AUDIO TOC VIDEO TOC 1* 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 A0 A0 A1 A1 A2 A2 01 03 02 A0 A0 A1 A1 A2 A2 03 01 A0 02 A1 A0 A2 A1 03 A2 A0 A1 A2 1 2 A0 (repeat) A1 A2 01 02 A0 (repeat) A1 A2 A0 A1 A2

48、3 A0 (repeat) A1 A2 03 A0 (repeat) A1 A2 03 and so on.EN 61104:1992 BSI 01-2000 9 Add the following new figure: Recorded area Figure 17 EN61104:1992 10 BSI 01-2000 Annex ZA (normative) Other international publications quoted in this standard with the references of the relevant European publications

49、When the international publication has been modified by CENELEC common modifications, indicated by (mod), the relevant EN/HD applies. IEC Publication Date Title EN/HD Date 856 1986 Pre-recorded optical reflective videodisk system “Laser vision”50Hz/625lines PAL HD514 S1 1989 857 1986 Pre-recorded optical reflective videodisk system “Laser vision”60Hz/525 lines M/NTSC 908 1987 Compact disc digital audio system EN60908 1992BSEN61104:1993 BSI 01-2000 National annex NA (informative) Committees responsible The UnitedKing