1、BRITISH STANDARD BS EN 61119-6:1994 IEC 1119-6: 1992 Digital audio tape cassette system (DAT) Part6: Serial copy management system The European Standard EN61119-6:1994 has the status of a BritishStandard UDC 621.396.7:681.84.083:621.3.037.37BSEN61119-6:1994 This BritishStandard, having been prepared
2、 under the directionof the Electrotechnical Sector Board, was published underthe authority of the Standards Board and comes intoeffect on 15 November 1994 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference EEL/22 Draft for comment91/23960DC ISBN 0 580 2
3、3528 9 Cooperating organizations The European Committee for Electrotechnical Standardization (CENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countries: Austria Italy Belgium Luxembourg Denmark Netherlands Finland Norway Franc
4、e Portugal Germany Spain Greece Sweden Iceland Switzerland Ireland United Kingdom Amendments issued since publication Amd. No. Date CommentsBSEN61119-6:1994 BSI 12-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative references 3 3 T
5、echnical requirements 3 Annex A (normative) Lists 5 Annex ZA (normative) Other publications quoted in this standard withthereferences of the relevant European publications 6 National annex NA (informative) Committees responsible Inside back cover National annex NB (informative) Cross-references Insi
6、de back coverBSEN61119-6:1994 ii BSI 12-1999 National foreword This BritishStandard has been prepared under the direction of the Electrotechnical Sector Board and is the English language version of EN61119-6:1994 Digital tape cassette system (DAT). Part6: Serial copy management system, published by
7、the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC1119-6:1992 published by the International Electrotechnical Commission (IEC). BS EN61119 consists of the following Parts: Part 1: Dimensions and characteristics; Part 2: DAT calibration tape; Part 3: DAT t
8、ape properties; Part 4: Character pack format 1) ; Part 5: DAT for professional use 1) ; Part 6: Serial copy management system; Part 7: DAT logo application rule 1) . A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible
9、 for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to6, an inside back cover and a back cover. This standar
10、d has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. 1) In preparationEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN61119-6 July 1994 UDC 621.396.7:681.84.083:621.3.037.37 Descriptors: Sound r
11、ecording, digital recording, data recording devices, audiocassettes, specifications, recording characteristics, copies, interfaces, digital signal English version Digital audio tape cassette system (DAT) Part6: Serial copy management system (IEC1119-6:1992) Systme audiomrique cassette (DAT) Partie6:
12、 Systeme de gestion des copies conscutives (CEI1119-6:1992) Digitales Tonband-Kassetten-System Teil6: System fr serielles Kopieren (IEC1119-6:1992) This European Standard was approved by CENELEC on 1994-03-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipul
13、ate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard
14、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national
15、electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation
16、 Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1994 Copyright reserved to CENELEC members Ref.No.EN61119-6:1994EEN61119-6:1994 BSI 12-1999 2 Foreword The CENELEC questionnaire procedure, performed for finding out whether or
17、 not the International Standard IEC1119-6:1992 could be accepted without textual changes, has shown that no common modifications were necessary for the acceptance as a European Standard. The reference document was submitted to the CENELEC members for formal vote and was approved by CENELEC as EN6111
18、9-6 on8March1994. The following dates were fixed: For products which have complied with the relevant national standard before 1995-03-15, as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until2000-03-15. Annexes designated “normativ
19、e” are part of the body of the standard. In this standard, Annex A and Annex ZA are normative. latest date of publication ofan identical national standard (dop) 1995-03-15 latest date of withdrawal ofconflicting national standards (dow) 1995-03-15EN61119-6:1994 BSI 12-1999 3 1 Scope This part of IEC
20、1119 is applicable to the Digital Audio Tape (DAT) cassette system for consumer applications. It states the requirements for the recording function with digital audio interface signals and for digital output signals on DAT recorders. 2 Normative references The following normative documents contain p
21、rovisions which, through reference in this text, constitute provisions of this part of IEC1119. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC1119 are encouraged to investigate the po
22、ssibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC958:1989, Digital audio interface. Amendment1 (in preparation). IEC1119-1:1992, Digital audio tape cassette system (DAT)
23、 Part1: Dimensions and characteristics. IEC1119-2:1991, Digital audio tape cassette system (DAT) Part2: DAT calibration tape. IEC1119-3:1992, Digital audio tape cassette system (DAT) Part3: DAT tape properties. IEC1119-5:199X, Digital audio tape cassette system (DAT) Part5: DAT for professional use
24、(inpreparation). 3 Technical requirements 3.1 Digital output signals 3.1.1 Category code The recorder shall provide the category code in the channel status bits of the digital output signal. The category code shall be applied in the digital output signal as follows, in accordance with the status of
25、sub-code ID6 in the main ID of the main data area. 3.1.2 Copyright status bit The recorder shall provide the copyright status bit in the channel status bits of the digital output signal. The copyright status bit shall be applied in the digital output signal as follows, in accordance with the status
26、of sub-code ID6 in the main ID of the main data area: 3.2 Recording functions 3.2.1 This part applies to DAT recorders if “bit0” and “bit1” of the channel status bits are“00”. However, recording is inhibited if “bit0” and “bit1” are“10”,“01” or“11”. 3.2.2 ID6 shall be recorded with“10” for digital i
27、nput signals without category code information, e.g.without channel status bits or with an undefined category code, independently of the status of the copyright status bit or the L bit of the category code (see Annex A). 3.2.3 For digital input signals originating from an analogue/digital converter
28、with category code “analogue/digital converter”(01100XXL), or originating from other sources, such as digital broadcasting receivers and analogue/digital converters with category code “general”(00000000), ID6 shall be recorded with“11” on the tape, independently of the status of the copyright status
29、 bit or the category code L bit. This requirement shall not be applied to the analogue/digital converters of the type specified in3.2.4. NOTEThe digital input signal specified in this subclause does not contain the source information of the original signal before digitization. The analogue digital c
30、onverter is of a type which does not deliver source information. 3.2.4 For digital input signals originating from an analogue/digital converter with category code “analogue/digital converter”(01101XXL), which can deliver original source information on the copy status even if the source is in analogu
31、e domain, the requirement stated in3.2.3 shall not be applied. The white list in Annex A includes these category codes. 3.2.5 For digital input signals with a copyright status bit set for “not copyright protected”(1),ID6 shall be recorded with“00” on the tape, except for the cases specified in3.2.2
32、and3.2.3. 3.2.6 Digital input signals with a copyright status bit set for “copyright protected”(0) shall not be recorded on the tape, except for the cases specified in3.2.2, 3.2.3 and3.2.7. When ID6 is “00” or “10” “DAT” (11000000) When ID6 is “11” “DAT-P” (11000001) When ID6 is “00” Copyright statu
33、s bit set for “not copyright protected”. When ID6 is “10” or “11” Copyright status bit set for “copyright protected”.EN61119-6:1994 4 BSI 12-1999 3.2.7 Recording shall be possible for digital input signals with a copyright status bit set for “copyright protected”(0) when a category code of the signa
34、l is listed in the white list (see Annex A). In this case, ID6 shall be recorded with“10” on the tape. 3.2.8 Recording shall not be possible for digital input signals with a copyright status bit set to alternate between “copyright protected” and “not copyright protected” when one of the category cod
35、es is a compact disc digital audio signal(10000000). (The frequency of the alternation4Hz to10Hz is under consideration). 3.2.9 Commercially released prerecorded DAT tapes shall record“11” or“00” in ID6 on the tape. 3.2.10 The condition“01” in ID6 is not to be used. 3.2.11 Category codes and copyrig
36、ht status bits included in the digital input signals shall not be deleted or modified, and shall be monitored continuously and acted upon accordingly.EN61119-6:1994 BSI 12-1999 5 Annex A (normative) Lists A.1 List of defined category codes A.2 White list (recording permitted with limitations) 000000
37、00 General. Used temporarily 100XXXXL Laser-optical products 010XXXXL Digital/digital converters and signal processing products 110XXXXL Magnetic tape or disc based products 001XXXXL and 0111XXXL Broadcast reception of digitally encoded audio signals with or without video signals 101XXXXL Music inst
38、ruments, microphones and other sources that create original signals 01100XXL Analogue/digital converters for analogue signal without copyright information 01101XXL Analogue/digital converters for analogue signals which include copyright information of “C-bit and L-bit status” 0001XXXL Solid state me
39、mory based products 0000001L Signal which does not include copyright information (under consideration) Not defined are: 111XXXXL Reserved 0000XXXL Reserved, except00000000 and0000001L 100XXXX0 Laser-optical products 010XXXX1 Digital/digital converters and signal processing products 110XXXX1 Magnetic
40、 tape or disc based products 001XXXX0 and 0111XXX0 Broadcast reception of digitally encoded audio signals with or without video signals 101XXXX1 Music instruments, microphones and other sources that create original signals 01101XX1 Analogue/digital converters for analogue signals which include copyr
41、ight information of “C-bit and L-bit status” 0001XXX1 Solid state memory based products 00000011 Signal which does not include copyright information (under consideration) Examples: 10000000 11000001 00100000 00100010 CD player DAT-P DBS, TV with digital sound (Japan) Electronic software deliveryEN61
42、119-6:1994 6 BSI 12-1999 Annex ZA (normative) Other international publications quoted in this standard with the references of the relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited
43、 at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition
44、of the publication referred to applies. NOTEWhen the international publication has been modified by CENELEC common modifications, indicated by (mod), the relevant EN/HD applies. IEC publication Date Title EN/HD Date 958 1989 Digital audio interface EN60958 1990 A1 1993 A1 1994 1119-1 1992 Digital au
45、dio tape cassette system (DAT) Part1:Dimensions and characteristics EN61119-1 1994 1119-2 1991 Part2: DAT calibration tape EN61119-2 1994 1119-3 1992 Part3: DAT tape properties EN61119-3 1994 1119-5 1993 Part5: DAT for professional use BSEN61119-6:1994 BSI 12-1999 National annex NA (informative) Com
46、mittees responsible The United Kingdom participation in the preparation of this European Standard was entrusted by the Electrotechnical Sector Board to Technical Committee EEL/22, upon which the following bodies were represented: Association of Professional Recording Services Ltd. Audio Engineering
47、Society British Broadcasting Corporation British Kinematograph, Sound and Television Society British Tape Industry Association Federation of the Electronic Industries Independent Television Association National Council for Educational Technology (NCET) Royal Photographic Society Royal Television Soc
48、iety National annex NB (informative) Cross-references Publication referred to Corresponding BritishStandard EN60958:1990 (IEC958:1989) BS7239:1989 Specification for digital audio interface BS EN61119 Digital audio tape cassette system (DAT) EN61119-1:1992 (IEC1119-1:1992) BS EN61119-1:1994 Dimension
49、s and characteristics EN61119-2:1991 (IEC1119-2:1991) BS EN61119-2:1994 DAT calibration tape EN61119-3:1992 (IEC1119-3:1992) BS EN61119-3:1994 DAT tape propertiesBS EN 61119-6:1994 IEC 1119-6: 1992 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1