1、BSI Standards PublicationIndustrial communication networks Fieldbus specificationsPart 3-19: Data-link layer service definition Type 19 elementsBS EN 61158-3-19:2014National forewordThis British Standard is the UK implementation of EN 61158-3-19:2014. It isidentical to IEC 61158-3-19:2014. It supers
2、edes BS EN 61158-3-19:2012which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secre
3、tary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 79368 4ICS 25.040.40; 35.100.20; 35.240.50Compliance with a Bri
4、tish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61158-3-19:2014EUROPEAN STANDARD N
5、ORME EUROPENNE EUROPISCHE NORM EN 61158-3-19 October 2014 ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-3-19:2012 English Version Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements (IEC 61158-3-19:2014) Rseaux de comm
6、unication industriels - Spcifications des bus de terrain - Partie 3-19: Dfinition des services de la couche liaison de donnes - Elments de type 19 (CEI 61158-3-19:2014) Industrielle Kommunikationsnetze - Feldbusse - Teil 3-19: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 19-Eleme
7、nte (IEC 61158-3-19:2014) This European Standard was approved by CENELEC on 2014-09-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date
8、lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio
9、n under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmar
10、k, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Com
11、mittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CE
12、NELEC Members. Ref. No. EN 61158-3-19:2014 E BS EN 61158-3-19:2014EN 61158-3-19:2014 - 2 - Foreword The text of document 65C/759/FDIS, future edition 3 of IEC 61158-3-19, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to t
13、he IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-3-19:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-06-17 latest date by which the national s
14、tandards conflicting with the document have to be withdrawn (dow) 2017-09-17 This document supersedes EN 61158-3-19:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identif
15、ying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the International Standard IEC 61158-3-19:2014 was approved by CENELEC as a European Standard withou
16、t any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61131 NOTE Harmonized in EN 61131 series. IEC 61158-1 NOTE Harmonized as EN 61158-1. IEC 61158-4-19 NOTE Harmonized as EN 61158-4-19. IEC 61158-5-19 NOTE Harmonized as
17、 EN 61158-5-19. IEC 61158-6-19 NOTE Harmonized as EN 61158-6-19. IEC 61784-1 NOTE Harmonized as EN 61784-1. IEC 61784-2 NOTE Harmonized as EN 61784-2. IEC 61800 NOTE Harmonized in EN 61800 series. IEC 61800-7 NOTE Harmonized in EN 61800-7 series. BS EN 61158-3-19:2014- 3 - EN 61158-3-19:2014 Annex Z
18、A (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. F
19、or undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the Eur
20、opean Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year ISO/IEC 7498-1 - Information technology - Open Systems Interconnection - Basic Reference Model: The Basic Model - - ISO/IEC 7498-3 - Information technology - Open Systems Interconnection - Basic
21、 Reference Model: Naming and addressing - - ISO/IEC 10731 - Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services - - BS EN 61158-3-19:2014 2 IEC 61158-3-19:2014 IEC 2014 CONTENTS INTRODUCTION . 5 1 Scope . 6 1.1 General . 6 1.
22、2 Specifications 6 1.3 Conformance . 6 2 Normative references . 7 3 Terms, definitions, symbols, abbreviations and conventions . 7 3.1 Reference model terms and definitions 7 3.2 Service convention terms and definitions . 8 3.3 Data-link service terms and definitions 9 3.4 Symbols and abbreviations
23、12 3.5 Common conventions 14 4 Data-link services and concepts . 15 4.1 Overview . 15 4.2 Service channel services (SVC services) . 16 4.3 Hot-plug services 18 4.4 Realtime channel setup services (RTCS services) . 19 4.5 RTC services . 21 Bibliography 24 Figure 1 Relationships of DLSAPs, DLSAP-addre
24、sses and group DL-addresses 11 Table 1 Summary of DL services and primitives . 15 Table 2 Read (RD) . 17 Table 3 Write (WR) 18 Table 4 Enable_Hotplug (EHP) 19 Table 5 Notify_Hotplug (NHP) 19 Table 6 Initiate_cyclic_communication (ICC) 20 Table 7 Disable_cyclic_communication (DCC) . 21 Table 8 Notify
25、_Error (NER) 21 Table 9 Write_cyclic (WRC) . 21 Table 10 Send_Device_Status (SDS) . 22 Table 11 Write_Device_Status (WDS) 23 Table 12 Notify_Network_Status_Change (NNSC) . 23 BS EN 61158-3-19:2014IEC 61158-3-19:2014 IEC 2014 5 INTRODUCTION This part of IEC 61158 is one of a series produced to facili
26、tate the interconnection of automation system components. It is related to other standards in the set as defined by the “three-layer” fieldbus reference model described in IEC 61158-1. Throughout the set of fieldbus standards, the term “service” refers to the abstract capability provided by one laye
27、r of the OSI Basic Reference Model to the layer immediately above. Thus, the data-link layer service defined in this standard is a conceptual architectural service, independent of administrative and implementation divisions. BS EN 61158-3-19:2014 6 IEC 61158-3-19:2014 IEC 2014 INDUSTRIAL COMMUNICATI
28、ON NETWORKS FIELDBUS SPECIFICATIONS Part 3-19: Data-link layer service definition Type 19 elements 1 Scope General 1.1This standard provides common elements for basic time-critical messaging communications between devices in an automation environment. The term “time-critical” is used to represent th
29、e presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant an
30、d possibly human life. This standard defines in an abstract way the externally visible service provided by the Type 19 fieldbus data-link layer in terms of a) the primitive actions and events of the service; b) the parameters associated with each primitive action and event, and the form which they t
31、ake; and c) the interrelationship between these actions and events, and their valid sequences. The purpose of this standard is to define the services provided to the Type 19 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model, and s
32、ystems management at the boundary between the data-link layer and systems management of the fieldbus reference model. Specifications 1.2The principal objective of this standard is to specify the characteristics of conceptual data-link layer services suitable for time-critical communications, and thu
33、s supplement the OSI Basic Reference Model in guiding the development of data-link protocols for time-critical communications. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. This standard may be used as the basis for formal DL-Progra
34、mming-Interfaces. Nevertheless, it is not a formal programming interface, and any such interface will need to address implementation issues not covered by this specification, including: a) the sizes and octet ordering of various multi-octet service parameters, and b) the correlation of paired reques
35、t and confirm, or indication and response, primitives. Conformance 1.3This standard does not specify individual implementations or products, nor do they constrain the implementations of data-link entities within industrial automation systems. There is no conformance of equipment to this data-link la
36、yer service definition standard. Instead, conformance is achieved through implementation of the corresponding data-link protocol that fulfills the Type 19 data-link layer services defined in this standard. BS EN 61158-3-19:2014IEC 61158-3-19:2014 IEC 2014 7 2 Normative references The following docum
37、ents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE All parts of the IEC
38、61158 series, as well as IEC 61784-1 and IEC 61784-2 are maintained simultaneously. Cross-references to these documents within the text therefore refer to the editions as dated in this list of normative references. ISO/IEC 7498-1, Information technology Open Systems Interconnection Basic Reference M
39、odel: The Basic Model ISO/IEC 7498-3, Information technology Open Systems Interconnection Basic Reference Model: Naming and addressing ISO/IEC 10731, Information technology Open Systems Interconnection Basic Reference Model Conventions for the definition of OSI services 3 Terms, definitions, symbols
40、, abbreviations and conventions For the purposes of this document, the following terms, definitions, symbols, abbreviations and conventions apply. Reference model terms and definitions 3.1This standard is based in part on the concepts developed in ISO/IEC 7498-1 and ISO/IEC 7498-3, and makes use of
41、the following terms defined therein: DL-address 3.1.1 7498-3 DL-address-mapping 3.1.2 7498-1 called-DL-address 3.1.3 7498-3 calling-DL-address 3.1.4 7498-3 centralized multi-end-point-connection 3.1.5 7498-1 DL-connection 3.1.6 7498-1 DL-connection-end-point 3.1.7 7498-1 DL-connection-end-point-iden
42、tifier 3.1.8 7498-1 DL-connection-mode transmission 3.1.9 7498-1 DL-connectionless-mode transmission 3.1.10 7498-1 correspondent (N)-entities 3.1.11correspondent DL-entities (N=2) correspondent Ph-entities (N=1) 7498-1 DL-duplex-transmission 3.1.12 7498-1 (N)-entity 3.1.13DL-entity (N=2) Ph-entity (
43、N=1) 7498-1 DL-facility 3.1.14 7498-1 BS EN 61158-3-19:2014 8 IEC 61158-3-19:2014 IEC 2014 flow control 3.1.15 7498-1 (N)-layer 3.1.16DL-layer (N=2) Ph-layer (N=1) 7498-1 layer-management 3.1.17 7498-1 DL-local-view 3.1.18 7498-3 DL-name 3.1.19 7498-3 naming-(addressing)-domain 3.1.20 7498-3 peer-en
44、tities 3.1.21 7498-1 primitive name 3.1.22 7498-3 DL-protocol 3.1.23 7498-1 DL-protocol-connection-identifier 3.1.24 7498-1 DL-protocol-data-unit 3.1.25 7498-1 DL-relay 3.1.26 7498-1 reset 3.1.27 7498-1 responding-DL-address 3.1.28 7498-3 routing 3.1.29 7498-1 segmenting 3.1.30 7498-1 (N)-service 3.
45、1.31DL-service (N=2) Ph-service (N=1) 7498-1 (N)-service-access-point 3.1.32DL-service-access-point (N=2) Ph-service-access-point (N=1) 7498-1 DL-service-access-point-address 3.1.33 7498-3 DL-service-connection-identifier 3.1.34 7498-1 DL-service-data-unit 3.1.35 7498-1 DL-simplex-transmission 3.1.3
46、6 7498-1 DL-subsystem 3.1.37 7498-1 systems-management 3.1.38 7498-1 DL-user-data 3.1.39 7498-1 Service convention terms and definitions 3.2This standard also makes use of the following terms defined in ISO/IEC 10731 as they apply to the data-link layer: BS EN 61158-3-19:2014IEC 61158-3-19:2014 IEC
47、2014 9 acceptor 3.2.1asymmetrical service 3.2.2confirm (primitive); 3.2.3requestor.deliver (primitive) deliver (primitive) 3.2.4DL-confirmed-facility 3.2.5DL-facility 3.2.6DL-local-view 3.2.7DL-mandatory-facility 3.2.8DL-non-confirmed-facility 3.2.9DL-provider-initiated-facility 3.2.10DL-provider-op
48、tional-facility 3.2.11DL-service-primitive; 3.2.12primitive DL-service-provider 3.2.13DL-service-user 3.2.14DL-user-optional-facility 3.2.15indication (primitive); 3.2.16acceptor.deliver (primitive) multi-peer 3.2.17request (primitive); 3.2.18requestor.submit (primitive) requestor 3.2.19response (pr
49、imitive); 3.2.20acceptor.submit (primitive) submit (primitive) 3.2.21symmetrical service 3.2.22Data-link service terms and definitions 3.3For the purposes of this document, the following terms and definitions apply. 3.3.1communication cycle fixed time period between two master synchronization telegrams in which real-time telegrams are transmitted in the RT channel and non real-time te
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1