BS EN 61169-11-2017 Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9 5 mm with threaded coupling Characteristic.pdf

1、Radio-frequency connectorsPart 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 (Type 4,1-9,5)BS EN 61169-11:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EU

2、ROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61169-11 June 2017 ICS 33.120.30 English Version Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 (type 4,1-9,5

3、) (IEC 61169-11:2017) Connecteurs pour frquences radiolectriques - Partie 11: Spcification intermdiaire relative aux connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur du conducteur extrieur de 9,5 mm couplage filet - Impdance caractristique 50 (type 4,1-9,5) (IEC 61169-11:201

4、7) Hochfrequenz-Steckverbinder - Teil 11: Rahmenspezifikation fr koaxile HF-Steckverbinder mit 9,5 mm Innendurchmesser des Auenleiters und Schraubverriegelung - Wellenwiderstand 50 (Typ 4.1-9.5) (IEC 61169-11:2017) This European Standard was approved by CENELEC on 2017-04-26. CENELEC members are bou

5、nd to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the C

6、EN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management

7、 Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,

8、 Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches

9、 Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61169-11:2017 E National forewordThis British Standard is the UK implementat

10、ion of EN 61169-11:2017. It is identical to IEC 61169-11:2017.The UK participation in its preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this com

11、mittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 87769 8ICS 33.12

12、0.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61169

13、-11:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61169-11 June 2017 ICS 33.120.30 English Version Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 (ty

14、pe 4,1-9,5) (IEC 61169-11:2017) Connecteurs pour frquences radiolectriques - Partie 11: Spcification intermdiaire relative aux connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur du conducteur extrieur de 9,5 mm couplage filet - Impdance caractristique 50 (type 4,1-9,5) (IEC 61

15、169-11:2017) Hochfrequenz-Steckverbinder - Teil 11: Rahmenspezifikation fr koaxile HF-Steckverbinder mit 9,5 mm Innendurchmesser des Auenleiters und Schraubverriegelung - Wellenwiderstand 50 (Typ 4.1-9.5) (IEC 61169-11:2017) This European Standard was approved by CENELEC on 2017-04-26. CENELEC membe

16、rs are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicatio

17、n to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC

18、Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland

19、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique E

20、uropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61169-11:2017 E BS EN 61169-11:2017EN 61159-11:2017 2 European for

21、eword The text of document 46F/322A/CDV, future edition 1 of IEC 61159-11, prepared by SC 46F “RF and microwave passive components“, of IEC/TC 46 “Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approve

22、d by CENELEC as EN 61159-11:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-26 latest date by which the national standards conflicting with the document hav

23、e to be withdrawn (dow) 2020-04-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC

24、61159-11:2017 was approved by CENELEC as a European Standard without any modification. BS EN 61169-11:2017EN 61159-11:2017 2 European foreword The text of document 46F/322A/CDV, future edition 1 of IEC 61159-11, prepared by SC 46F “RF and microwave passive components“, of IEC/TC 46 “Cables, wires, w

25、aveguides, RF connectors, RF and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61159-11:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an ide

26、ntical national standard or by endorsement (dop) 2018-01-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC sh

27、all not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61159-11:2017 was approved by CENELEC as a European Standard without any modification. EN 61159-11:2017 3 Annex ZA (normative) Normative references to internationa

28、l publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the r

29、eferenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

30、here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61169-1 2013 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods EN 61169-1 2013 IEC 62037-3 - Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of

31、passive intermodulation in coaxial connectors EN 62037-3 - BS EN 61169-11:2017This page deliberately left blank 2 IEC 61169-11:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Mating face and gauge information 6 Dimensions General connectors Grade 2 6 3.13.1.1 Connector with

32、pin centre contact 6 3.1.2 Connector with socket centre contact 8 Gauges . 9 3.23.2.1 Gauge pin for socket centre contact. 9 3.2.2 Connector with pin centre contact 10 Dimensions Standard test connectors Grade 0 10 3.33.3.1 Connector with pin centre contact 10 3.3.2 Connector with socket centre cont

33、act 11 4 Quality assessment procedures . 12 General . 12 4.1Ratings and characteristics (see Clause 5 of IEC 61169-1:2013) 12 4.2Test schedule and inspection requirements. 15 4.34.3.1 Acceptance tests . 15 4.3.2 Periodic tests . 15 Procedures for the quality conformance 18 4.44.4.1 Quality conforman

34、ce inspection . 18 4.4.2 Qualification approval and its maintenance 18 5 Instructions for preparation of detail specifications 18 General . 18 5.1Identification of the component . 18 5.2Performances . 18 5.3Marking, ordering information and related matters 19 5.4Selection of tests, test conditions a

35、nd severities . 19 5.5Blank detail specification pro-forma for type 4,1-9,5 connector 19 5.66 Marking . 23 Marking of component . 23 6.1Marking and contents of package 24 6.2Figure 1 Connector with pin centre contact (for dimensions, see Table 1) 7 Figure 2 Connector with socket centre contact (for

36、dimensions, see Table 2) . 8 Figure 3 Gauge pin for socket centre contact (for dimensions, see Table 3) . 9 Figure 4 Connector with pin centre contact (for dimensions, see Table 4) 11 Figure 5 Connector with socket in centre contact (for dimensions, see Table 5) . 11 Table 1 Dimensions of connector

37、with pin centre contact . 7 Table 2 Dimensions of connector with socket centre contact 9 Table 3 Dimensions of gauge pin for socket centre contact 10 Table 4 Dimensions of connector with pin centre contact . 11 Table 5 Dimensions of connector with socket centre contact 12 Table 6 Rating and characte

38、ristics . 13 2 IEC 61169-11:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Mating face and gauge information 6 Dimensions General connectors Grade 2 6 3.13.1.1 Connector with pin centre contact 6 3.1.2 Connector with socket centre contact 8 Gauges . 9 3.23.2.1 Gauge pin for

39、 socket centre contact. 9 3.2.2 Connector with pin centre contact 10 Dimensions Standard test connectors Grade 0 10 3.33.3.1 Connector with pin centre contact 10 3.3.2 Connector with socket centre contact 11 4 Quality assessment procedures . 12 General . 12 4.1Ratings and characteristics (see Clause

40、 5 of IEC 61169-1:2013) 12 4.2Test schedule and inspection requirements. 15 4.34.3.1 Acceptance tests . 15 4.3.2 Periodic tests . 15 Procedures for the quality conformance 18 4.44.4.1 Quality conformance inspection . 18 4.4.2 Qualification approval and its maintenance 18 5 Instructions for preparati

41、on of detail specifications 18 General . 18 5.1Identification of the component . 18 5.2Performances . 18 5.3Marking, ordering information and related matters 19 5.4Selection of tests, test conditions and severities . 19 5.5Blank detail specification pro-forma for type 4,1-9,5 connector 19 5.66 Marki

42、ng . 23 Marking of component . 23 6.1Marking and contents of package 24 6.2Figure 1 Connector with pin centre contact (for dimensions, see Table 1) 7 Figure 2 Connector with socket centre contact (for dimensions, see Table 2) . 8 Figure 3 Gauge pin for socket centre contact (for dimensions, see Tabl

43、e 3) . 9 Figure 4 Connector with pin centre contact (for dimensions, see Table 4) 11 Figure 5 Connector with socket in centre contact (for dimensions, see Table 5) . 11 Table 1 Dimensions of connector with pin centre contact . 7 Table 2 Dimensions of connector with socket centre contact 9 Table 3 Di

44、mensions of gauge pin for socket centre contact 10 Table 4 Dimensions of connector with pin centre contact . 11 Table 5 Dimensions of connector with socket centre contact 12 Table 6 Rating and characteristics . 13 BS EN 61169-11:2017IEC 61169-11:2017 IEC 2017 3 Table 7 Acceptance tests . 16 Table 8

45、Periodic tests 17 BS EN 61169-11:2017IEC 61169-11:2017 IEC 2017 3 Table 7 Acceptance tests . 16 Table 8 Periodic tests 17 4 IEC 61169-11:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 11: Sectional specification for RF coaxial connectors with inner diameter

46、 of outer conductor 9,5 mm with threaded coupling Characteristic impedance 50 (type 4,1-9,5) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IE

47、C is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)

48、 and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with

49、the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical commi