BS EN 61169-42-2013 Radio-frequency connectors Sectional specification for CQN series quick lock RF coaxial connectors《射频连接器 CQN系列快速锁定射频同轴连接器的分规范》.pdf

1、BSI Standards PublicationRadio-frequency connectorsPart 42: Sectional specification for CQN series quick lock RF coaxial connectorsBS EN 61169-42:2013National forewordThis British Standard is the UK implementation of EN 61169-42:2013. It isidentical to IEC 61169-42:2013.The UK participation in its p

2、reparation was entrusted to TechnicalCommittee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to inclu

3、de all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 64928 8ICS 33.120.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This Briti

4、sh Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61169-42:2013EUROPEAN STANDARD EN 61169-42 NORME EUROPENNE EUROPISCHE NORM April 2013 CENELEC Europea

5、n Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENEL

6、EC members. Ref. No. EN 61169-42:2013 E ICS 33.120.30 English version Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors (IEC 61169-42:2013) Connecteurs pour frquences radiolectriques - Partie 42: Spcification intermdiaire pour connecteurs c

7、oaxiaux R.F. verrouillage rapide, srie CQN (CEI 61169-42:2013) Hochfrequenz-Steckverbinder - Teil 42: Rahmenspezifikation fr koaxiale HF-Steckverbinder der CQN Serie mit Schnellverriegelung (IEC 61169-42:2013) This European Standard was approved by CENELEC on 2013-02-20. CENELEC members are bound to

8、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CE

9、NELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Cent

10、re has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital

11、y, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61169-42:2013EN 61169-42:2013 - 2 - Foreword The text of document 46F/142/CDV, future edition 1 of IEC 61169-42, prepared

12、by SC 46F, “R.F. and microwave passive components“, of IEC TC 46, “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61169-42:2013. The following dates are fixed: latest date

13、 by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-11-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-02-20 Attention is drawn to the possibility tha

14、t some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61169-42:2013 was approved by CENELEC as a European Standard with

15、out any modification. BS EN 61169-42:2013- 3 - EN 61169-42:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for i

16、ts application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD app

17、lies. Publication Year Title EN/HD Year IEC 61169-1 + A1 + A2 1992 1996 1997 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods EN 61169-1 + A1 + A2 1994 1996 1997 BS EN 61169-42:2013 2 61169-42 IEC:2013 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Nor

18、mative reference . 6 3 Mating face and gauge information . 6 Dimensions General connectors Grade 2 . 6 3.1Connector with pin-centre contact 6 3.1.1Connector with socket-centre contact 9 3.1.2Gauges . 9 3.2Gauge pins for socket-centre contact . 9 3.2.1Test procedure 10 3.2.2Dimensions- standard test

19、connectors Grade 0. 11 3.3Connector with pin-centre contact 11 3.3.1Connector with socket-centre contact 13 3.3.24 Quality assessment procedure 14 General . 14 4.1Rating and characteristics (see Clause 6 of IEC 61169-1:1992) 14 4.2Test schedule and inspection requirements Acceptance tests . 17 4.3Ac

20、ceptance tests . 17 4.3.1Periodic tests. 18 4.3.2Procedures 20 4.4Quality conformance inspection . 20 4.4.1Qualification approval and its maintenance 20 4.4.25 Instructions for preparation of detail specifications . 21 General . 21 5.1Identification of the component 21 5.2Performance 21 5.3Marking,

21、ordering information and related matters . 21 5.4Selection of tests, test conditions and severities 21 5.5Blank detail specification pro-forma for type CQN connector . 23 5.6Figure 1 Connector with pin-centre contact 7 Figure 2 Connector with socket-centre contact . 9 Figure 3 Gauge pins for socket-

22、centre contact . 9 Figure 4 Connector with pin-centre contact 11 Figure 5 Connector with socket-centre contact . 13 Table 1 Dimensions of connector with pin-centre contact . 8 Table 2 Dimensions of connector with socket-centre contact 10 Table 3 Dimensions of gauge pins for socket-centre contact 10

23、Table 4 Dimensions of connector with pin-centre contact . 12 Table 5 Dimensions of connector with socket-centre contact 14 Table 6 Rating and characteristics . 15 Table 7 Acceptance tests . 17 Table 8 Periodic tests 18 BS EN 61169-42:201361169-42 IEC:2013 5 INTRODUCTION The International Electrotech

24、nical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning the design of these connectors given in Subclause 3.1. IEC takes no position concerning the evidence, validity and scope of this patent right. The holde

25、r of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obta

26、ined from: Mr. Qu jinliang Address: Room 302, Gudai road 126648,Ghanghai 201102 China (021-54148062). Shaanxi huada S b) the connector series designation. The specification writer should enter the details relating to the connector style/variant(s) to be covered as indicated. The numbers in brackets

27、on the BDS pro-forma correspond to the following indications which shall be given. Identification of the component 5.2(5) Enter the following details: Style: The style designation of the connector including type of fixing and sealing, if applicable. Attachment: By deletion of the inapplicable option

28、s of cable/wire: given for centre and outer conductors. Special features and markings: As applicable. (6) Enter details of assessment level and the climatic category. (7) A reproduction of the outline drawing and details of the panel piercing, if applicable. It shall provide the maximum envelope dim

29、ensions, also the position of the reference plane and, in the case of a fixed connector, the position of the mounting plane(s) relative to the front face of the connector. Any maximum panel thickness limitations for fixed connectors shall be stated. (8) Particulars of all variants covered by the DS.

30、 As appropriate, the information shall include: cable types (or sizes) applicable to each variant; alternative plated or protective finishes; details of alternative mounting flanges having either tapped or plain mounting holes; details of alternative solder spills or solder buckets including, when a

31、pplicable, those for use with microwave integrated circuit (MIC) components. Performance 5.3(9) Performance data listing the most important characteristics of the connector taking into account the recommended values in 4.2 of this specification. Deviations from the minimum requirements shall be clea

32、rly indicated. Non-applicable parameters shall be marked na. Marking, ordering information and related matters 5.4(10) Insert marking and ordering information as appropriate, together with details of related documents and any invoked structural similarity. Selection of tests, test conditions and sev

33、erities 5.5(11) na shall be used to indicate non-applicable tests. All tests marked a by the detail specification writer shall be mandatory. When using the normal procedure with a dedicated BDS, the letter a for applicable shall be entered in the Test required column against each of the tests indica

34、ted as being mandatory in the test schedule as in 4.3 of this specification. Any additional tests required at the discretion of the specification writer shall also be indicated by an a. BS EN 61169-42:2013 22 61169-42 IEC:2013 The specification writer shall also indicate, when necessary, details of

35、deviations from the standard test methods and test conditions, including any relevant deviations given in the test schedule of the sectional specification. BS EN 61169-42:201361169-42 IEC:2013 23 Blank detail specification pro-forma for type CQN connector 5.6The following pages contain the complete

36、BDS pro-forma. (1) Page 1 of 10 ELECTRONIC COMPONENT OF ASSESSED QUALITY IN ACCORDANCE WITH GENERIC SPECIFICATION IEC 61169-1 SECTIONAL SPECIFICATION IEC 61169-42 NATIONAL REFERENCE (4) ISSUE (5) Detail specification for Radio frequency coaxial connector of assessed quality type CQN Style:. Special

37、features and markings Method of cable/wire+ attachment centre conductor solder/crimp+ outer conductor solder/clamp/crimp + + delete as appropriate (6) Assessment level. Characteristic impedance 50 Climatic category/././ (7) Outline and maximum dimensions Panel piercing and mounting details (8) Varia

38、nts Variant No. 01. . . . . . . . Description of variant . . . . . . . . . 61196 IEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information about manufacturers who have components qualified to this detail specification under the IECQ Conformity Assessment System, is avai

39、lable through IECQ on-line certificate system. BS EN 61169-42:2013 24 61169-42 IEC:2013 (9) Performance (including limiting conditions of use) Ratings and characteristics IEC 61169-1:1992 Subclause Value Remarks including any deviations from standard test methods Electrical Nominal impedance 50 Freq

40、uency range Reflection factor Variant No. Designation 01. . 9.2.1 0 GHz to 11 GHz . . Measurement frequency range . . Centre contact resistance 9.2.3 .m m Initial After conditioning Centre conductor continuity 01. . 9.2.3 .m .m .m .m Resistance change due to conditioning Outer contact continuity 9.2

41、.3 .m m Initial After conditioning Insulation resistance 9.2.5 G G Initial After conditioning #+ Proof voltage at sea level 01. . 9.2.6 kV kV kV kV 86 kPa to 106 kPa #+ Proof voltage at 4,4 kPa 01. . 9.2.6 .V .V .V .V .kPa (if not 4,4 kPa) #+ Environment test voltage at sea level 01. . 9.2.6 .V .V .

42、V .V 86 kPa to 106 kPa Environment test voltage at 4,4 kPa 01. . 9.2.6 .V .V .V .V .kPa (if not 4,4 kPa) Screening effectiveness 01. . 9.2.8 dB atGHz Zt ADDITIONAL ELECTRICAL CHARACTERISTICS + Voltage values are r.m.s. values at 50 Hz to 60 Hz, unless otherwise specified. BS EN 61169-42:201361169-42

43、 IEC:2013 25 Ratings and characteristics IEC 61169-1:1992 Subclause Value Remarks including any deviations from standard test methods Mechanical Soldering - bit size 9.3.2.1.1 . Gauge retention resilient contacts - inner contact - outer contact 9.3.4 . For gauging detail, see Figure 3 and Table 3 Ce

44、ntre contact captivation - axial force - permitted displacement in each direction 9.3.5 N mm Engagement and separation - axial force 9.3.6 Achievable by hand Effectiveness of cable fixing against - cable rotation 01. . 9.3.7.2 Rotations . . - cable pulling 01. . 9.3.8 N . Point of application and du

45、ration mms mms mms mms - cable bending 01. . 9.3.9 Cycles . Length of cable and mass . . . - cable torsion 01. . 9.3.10 Nm . Duration of applied torque s s s s s Bending moment 9.3.12 .Nm Relative to reference plane Vibration 9.3.3 m/s2toHz (gnacceleration) ADDITIONAL MECHANICAL CHARACTERISTICS BS E

46、N 61169-42:2013 26 61169-42 IEC:2013 Ratings and characteristics IEC 61169-1:1992 Subclause Value Remarks, including any deviations from standard test methods Environmental Climatic category ./ Sealing non-hermetically sealed connectors 9.4.5.1 cm3/h 100 kPa to 110 kPa pressure differential Sealing

47、hermetically sealed connectors 9.4.5.2 105bar/cm3/h 100 kPa to 110 kPa pressure differential Water immersion 9.2.7 Salt mist 9.4.6 .h Duration of spraying ADDITIONAL ENVIRONMENTAL CHARACTERISTICS ENDURANCE Mechanical 9.5 .operations High temperature 9.6 h atC ADDITIONAL ENDURANCE CHARACTERISTICS CHE

48、MICAL CONTAMINATION Resistance to solvents and contaminating fluids to be used Applicable fluids 9.7 . . Sulphur dioxide 9.4.8 BS EN 61169-42:201361169-42 IEC:2013 27 (10) Supplementary information Marking of the component: in accordance with 11.1 of IEC 61169-1:1992 in the following order of preference: 1) Identity of manufacture: . 2) Manufacturing date code: year /week 3) Component identification: variant No./designation Identification