BS EN 61169-43-2013 Radio-frequency connectors Sectional specification for RBMA series blind mating RF coaxial connectors《无线射频连接器 RBMA系列盲插射频(RF)同轴连接器分规格》.pdf

1、BSI Standards PublicationRadio-frequency connectorsPart 43: Sectional specification for RBMA series blind mating RF coaxil connectorsBS EN 61169-43:2013National forewordThis British Standard is the UK implementation of EN 61169-43:2013. It is identical to IEC 61169-43:2013.The UK participation in it

2、s preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguides, radio frequency connectors and acces-sories for communication and signalling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to

3、 include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013Published by BSI Standards Limited 2013 ISBN 978 0 580 74383 2 ICS 33.120.30Compliance with a British Standard cannot confer immunity from legal obligations.T

4、his British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBRITISH STANDARDBS EN 61169-43:2013EUROPEAN STANDARD EN 61169-43 NORME EUROPENNE EUROPISCHE NORM May 2013CENELEC European Committ

5、ee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

6、 Ref. No. EN 61169-43:2013 E ICS 33.120.30 English version Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors (IEC 61169-43:2013) Connecteurs pour frquencesradiolectriques - Partie 43: Spcification intermdiaire pourconnecteurs coaxiaux R.

7、F. couplageaveugle, srie RBMA (CEI 61169-43:2013) Hochfrequenz-Steckverbinder - Teil 43: Rahmenspezifikation fr koaxialeHF Steckverbinder der RBMA-Serie, blind steckbar(IEC 61169-43:2013) This European Standard was approved by CENELEC on 2013-04-24. CENELEC members are bound to complywith the CEN/CE

8、NELEC Internal Regulations which stipulate the conditions for giving this European Standardthe status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the CEN-CENELEC Management Centre o

9、r to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language and notifiedto the CEN-CENELEC Management Centre has the same status as t

10、he official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo

11、urg, Malta, the Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61169-43:2013EN 61169-43:2013 - 2 - Foreword The text of document 46F/221/FDIS, future edition 1 of IEC 61169-43, prepared by SC 46F “R.F. and microwave

12、 passive components“ of IEC/TC 46 “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61169-43:2013. The following dates are fixed: latest date by which the document has to be

13、 implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-01-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-04-24 Attention is drawn to the possibility that some of the elements of this d

14、ocument may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61169-43:2013 was approved by CENELEC as a European Standard without any modification. BS EN 6116

15、9-43:2013- 3 - EN 61169-43:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refere

16、nces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/

17、HD Year IEC 61169-1 + A1 + A2 1992 1996 1997 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods EN 61169-1 + A1 + A2 1994 1996 1997 BS EN 61169-43:2013 2 61169-43 IEC:2013(E) CONTENTS 1 Scope . 6 2 Normative references . 6 3 Mating face and gauge

18、information . 6 Dimensions General connectors Grade 2 . 6 3.1Connector with pin-centre contact 6 3.1.1Connector with socket-centre contact 8 3.1.2Gauges . 9 3.2Gauge pin for socket-centre contact 9 3.2.1Gauge for outer contact of connector with pin-centre contact . 10 3.2.2Dimensions Standard test c

19、onnectors Grade 0 11 3.3Connector with pin-centre contact 11 3.3.1Connector with socket-centre contact 12 3.3.2General requirements for connector mounting in modules and on panels . 13 3.4Limits of permissible connector radial misalignment and axial 3.4.1misalignment . 13 Specific connector mounting

20、 details . 16 3.4.24 Quality assessment procedure 16 General . 16 4.1Rating and characteristics (see Clause 6 of IEC 61169-1:1992) 17 4.2Test schedule and inspection requirements . 20 4.3Acceptance tests . 20 4.3.1Periodic tests. 21 4.3.2Procedures 22 4.4Quality conformance inspection . 22 4.4.1Qual

21、ification approval and its maintenance 22 4.4.25 Instructions for preparation of detail specifications . 23 General . 23 5.1Identification of the component 23 5.2Performance 23 5.3Marking, ordering information and related matters . 23 5.4Selection of tests, test conditions and severities 23 5.5Blank

22、 detail specification pro-forma for series RBMA connectors . 24 5.6Figure 1 Connector with pin- centre contact . 7 Figure 2 Connector with socket-centre contact . 8 Figure 3 Gauge pin for socket-centre contact . 9 Figure 4 Gauge for outer contact of connector with pin-centre contact . 10 Figure 5 Co

23、nnector with pin-centre contact (G0) 11 Figure 6 Connector with socket-centre contact . 12 Figure 7 Rigidly mounted connector with socket-centre contact and rigidly mounted connector with pin-centre contact radial misalignment limits . 14 Figure 8 Rigidly mounted connector with socket-centre contact

24、 and float-mounted connector with pin-centre contact radial misalignment limits . 14 Figure 9 Floating connector self-aligned 15 Figure 10 Separation between the two reference planes 16 BS EN 61169-43:201361169-43 IEC:2013(E) 3 Figure 11 Axial misalignment limits 16 Table 1 Dimensions of connector w

25、ith pin-centre contact . 7 Table 2 Dimensions of connector with socket-centre contact 8 Table 3 Dimensions of gauge pin for socket-centre contact 9 Table 4 Gauge for outer contact of connector with pin-centre contact 10 Table 5 Dimensions of connector with pin-centre contact (G0) . 12 Table 6 Dimens

26、ions of connector with socket-centre contact 13 Table 7 Rating and characteristics . 17 Table 8 Acceptance tests . 20 Table 9 Periodic tests 21 BS EN 61169-43:2013 6 61169-43 IEC:2013(E) RADIO-FREQUENCY CONNECTORS Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors 1

27、Scope This part of IEC 61169 which is a sectional specification (SS) provides information and rules for the preparation of detail specifications (DS) for RBMA series RF coaxial connectors, with characteristic impedance of 50 , with threaded coupling and operating frequency limit up to 12,4 GHz, used

28、 in wireless, microwave, telecommunication, and other fields, connecting with RF cables or micro-strips. It also prescribes mating face dimensions for general connectors-grade 2, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applica

29、ble to all detail specifications relating to RBMA series connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H (see Tables 8 and

30、9). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any a

31、mendments) applies. IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods1Amendment 1:1996 Amendment 2:1997 3 Mating face and gauge information Dimensions General connectors Grade 2 3.1Connector with pin-centre contact 3.1.1All undimens

32、ioned pictorial configurations are for reference purpose only. 1There exists a consolidated edition 1.2 (1998) that comprises IEC 61169-1:1992, its Amendment 1:1996 and its Amendment 2:1997. BS EN 61169-43:201361169-43 IEC:2013(E) 7 k l j i g h Note 1 Note 4Note 3Note 2 abcmnfedIEC 573/13 Figure 1 C

33、onnector with pin- centre contact (for dimensions and notes, see Table 1) Table 1 Dimensions of connector with pin-centre contact Ref. mm Notes Min. Max. a 4,18 Note 4 b Note 3 c 5,55 5,60 d Note 4 e 0,90 0,94 f 0,30 g 0,00 0,25 h 0,00 0,25 i 1,27 j 2,54 k 5,45 5,55 l 42 48 Angle m 7,40 7,60 n 8,00

34、NOTE 1 Mechanical and electrical reference plane. NOTE 2 Spring fingers, the structure is optional. NOTE 3 Dimensions are chosen to meet mechanical performance requirements. NOTE 4 These diameters are for PTFE insulation with a dielectric constant of 2,02. Characteristic impedance of transmission is

35、 determined by diameters “a“ and “d“ to be 50 within the tolerances as stated in the DS. BS EN 61169-43:2013 8 61169-43 IEC:2013(E) Connector with socket-centre contact 3.1.2l g k Note 2 cbah j Note 1 Note 3Note 4deIEC 574/13 Figure 2 Connector with socket-centre contact (for dimensions and notes, s

36、ee Table 2) Table 2 Dimensions of connector with socket-centre contact Ref. mm Notes Min. Max. a 4,18 Note 3 b 4,85 4,95 c 5,31 5,36 d Note 3 e Note 4 g 0,00 0,25 h 0,00 0,25 j 2,00 k 5,60 l 8 12 Angle NOTE 1 Mechanical and electrical reference plane. NOTE 2 Design and location of the seal feature i

37、s optional, in order to meet environmental performance requirements when mating interface separation is not more than 0,38 mm. NOTE 3 These diameters are for PTFE insulation with a dielectric constant of 2,02. Characteristic impedance of transmission is determined by diameters “a“ and “d“ to be 50 w

38、ithin the tolerances as stated in the DS. NOTE 4 Design for slotting is optional, to meet electrical and mechanical requirements, when mating with 0,90 mm to 0,94 mm pin. BS EN 61169-43:201361169-43 IEC:2013(E) 9 Gauges 3.2Gauge pin for socket-centre contact 3.2.150 a 0,2 mm max. R0,2 mm max. Blend

39、radius bIEC 575/13 Figure 3 Gauge pin for socket-centre contact (for dimensions and notes, see Table 3) Table 3 Dimensions of gauge pin for socket-centre contact Ref. Gauge A Maximum material for sizing purposes Gauge B Minimum material for measurement of retention force Mass of gauge: 28 g +2 g mm

40、mm Min. Max. Min. Max. a 0,940 0,945 0,899 0,902 b 0,76 1,14 1,27 1,90 Material: steel, polished. Surface roughness: Ra = 0,4 m maximum on the cylindrical surface of length b. 3.2.1.1 Test procedure The gauge A shall be inserted into the socket-centre contact three times with a minimum depth of 0,76

41、 mm. This is a sizing operation and should only be carried out when the socket-centre contact is removed from the connector. After this, the gauge B shall have a withdrawal force of 0,28 N minimum after being inserted into socket-centre contact. The contact shall retain the mass of the gauge in a ve

42、rtical downward position. This test shall also be carried out on connector when the socket-centre contact is not removed. BS EN 61169-43:2013 10 61169-43 IEC:2013(E) Gauge for outer contact of connector with pin-centre contact 3.2.2a b c de10 30 IEC 576/13 Figure 4 Gauge for outer contact of connect

43、or with pin-centre contact (for dimensions and notes, see Table 4) Table 4 Gauge for outer contact of connector with pin-centre contact Ref. Gauge A Maximum material for sizing purposes Gauge B Minimum material for measurement of retention force Mass of gauge: 56 g +2 g mm mm Min. Max. Min. Max. a 5

44、,360 5,365 5,305 5,310 b 4,85 4,95 4,85 4,95 c 2,50 2,50 d 4,00 4,00 e 5,60 5,60 Material: steel, polished. Surface roughness: Ra 0,4 m on the cylindrical surface of length e. 3.2.2.1 Test procedure The gauge A shall be inserted into the outer contact three times. This is a sizing operation. After t

45、his, the gauge B shall have a withdrawal force of 0,56 N minimum after being inserted into outer contact. The contact shall retain the mass of the gauge in a vertical downward position. BS EN 61169-43:201361169-43 IEC:2013(E) 11 Dimensions Standard test connectors Grade 0 3.3Connector with pin-centr

46、e contact 3.3.1Note 1 k A Note 3abcmng h Note 1 j B 0,013 mm B 0,025 mm A i fedNote 2 l Note 4IEC 577/13 Figure 5 Connector with pin-centre contact (G0) (for dimensions and notes, see Table 5) BS EN 61169-43:2013 12 61169-43 IEC:2013(E) Table 5 Dimensions of connector with pin-centre contact (G0) Re

47、f. mm Notes Min. Max. a 4,10 4,13 b Note 3 c 5,55 5,60 d 1,27 nominal e 0,902 0,927 f 0,30 g 0,00 0,15 h 0,00 0,15 i 1,27 1,37 j 2,03 2,29 k 5,45 5,55 l 42 48 Angle m 7,40 7,60 n 8,00 NOTE 1 Mechanical and electrical reference plane. NOTE 2 Spring fingers, the structure is optional. NOTE 3 Dimension

48、s are chosen to meet mechanical performance requirements. NOTE 4 The diameter is chosen upon the assumption that the PTFE dielectric has a dielectric constant of 2,02 to give an impedance of 50 0,5 . Connector with socket-centre contact 3.3.2Note 1 k a0,015 mm A l g h A B B 0,013 mm bcdNote 2j eIEC 578/13 Figure 6 Connector with socket-centre contact (for dimensions and notes, see Table 6) BS EN 61169-43:201361169-43 IEC:2013(E) 13 Table 6 Dimensions of connector with socket-centre contact Ref. mm Notes Min. Max. a 4,10 4,13 b 4,85 4,95 c 5,31 5,36 d 1,27 nominal e Note