BS EN 61202-1-2017 Fibre optic interconnecting devices and passive components Fibre optic isolators Generic specification《光纤互连器件和无源元件 光纤隔离器 总规范》.pdf

1、Fibre optic interconnecting devices and passive components Fibre optic isolatorsPart 1: Generic specificationBS EN 61202-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 61202-1:2017. It iside

2、ntical to IEC 61202-1:2016. It supersedes BS EN 61202-1:2009 which iswithdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on

3、this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 90677 0ICS

4、 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61202

5、-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61202-1 March 2017 ICS 33.180.20 Supersedes EN 61202-1:2009 English Version Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2016) Dispositifs dinterconnexion et

6、 composants passifs fibres optiques - Isolateurs fibres optiques - Partie 1: Spcification gnrique (IEC 61202-1:2016) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-Isolatoren - Teil 1: Fachgrundspezifikation (IEC 61202-1:2016) This European Standard was approved by

7、CENELEC on 2017-01-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national sta

8、ndards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own langu

9、age and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Franc

10、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen

11、 de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61202-1:2017 E BS EN 61202-1:2

12、017EN 61202-1:2017 2 European foreword The text of document 86B/3989A/CDV, future edition 4 of IEC 61202-1, prepared by SC 86B ”Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61202-1

13、:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-12 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 201

14、8-01-12 This document supersedes EN 61202-1:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the I

15、nternational Standard IEC 61202-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068 Series NOTE Harmonized as EN 60068 Series. IEC 60869-1 NOTE Harmonize

16、d as EN 60869-1. IEC 60874-1 NOTE Harmonized as EN 60874-1. IEC 61073-1 NOTE Harmonized as EN 61073-1. IEC 61753 Series NOTE Harmonized as EN 61753 Series. IEC 61754 Series NOTE Harmonized as EN 61754 Series. IEC 62005 Series NOTE Harmonized as EN 62005 Series. BS EN 61202-1:2017EN 61202-1:2017 3 An

17、nex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appli

18、es. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of th

19、e European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60027 Series Letter symbols to be used in electrical technology EN 60027 Series IEC 60050-731 - International Electrotechnical Vocabulary - Chapter 731: Optical fibre communication - - I

20、EC 60617-DB - Graphical symbols for diagrams - - IEC 60695 Series Fire hazard testing EN 60695-10 Series IEC 60825-1 - Safety of laser products - Part 1: Equipment classification and requirements EN 60825-1 - IEC 61300 Series Fibre optic interconnecting devices and passive components - Basic test an

21、d measurement procedures EN 61300 Series IEC/TS 62627-09 - Fibre optic interconnecting devices and passive components - Vocabulary for passive optical devices - - ISO 129-1 - Technical drawings - Indication of dimensions and tolerances - Part 1: General principles - - ISO 286-1 - Geometrical product

22、 specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits EN ISO 286-1 - ISO 1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out EN ISO 1101 - ISO 8601 - Data

23、 elements and interchange formats - Information interchange - Representation of dates and times - - BS EN 61202-1:2017 2 IEC 61202-1:2016 IEC 2016 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 3.1 Basic terms and definitions . 7 3.2 Component terms and definition

24、s 7 3.3 Performance parameter terms and definitions . 8 4 Requirements 10 4.1 Classification 10 4.1.1 General . 10 4.1.2 Type 10 4.1.3 Style 11 4.1.4 Variant . 11 4.1.5 Normative reference extensions. 11 4.2 Documentation 12 4.2.1 Symbols 12 4.2.2 Specification system 12 4.2.3 Drawings . 13 4.2.4 Te

25、sts and measurements . 13 4.2.5 Test data sheets 14 4.2.6 Instructions for use 14 4.3 Standardization system . 14 4.3.1 Interface standards 14 4.3.2 Performance standards 14 4.3.3 Reliability standards 14 4.3.4 Interlinking . 15 4.4 Design and construction 16 4.4.1 Materials . 16 4.4.2 Workmanship .

26、 16 4.5 Performance requirements 16 4.6 Identification and marking . 17 4.6.1 General . 17 4.6.2 Variant identification number . 17 4.6.3 Component marking . 17 4.6.4 Package marking . 17 4.7 Packaging . 18 4.8 Storage conditions 18 4.9 Safety . 18 (informative) Example of technology of bulk isolato

27、r based on magneto-optic Annex Aeffect . 19 A.1 General . 19 A.2 Faraday rotator . 19 A.3 Analyser . 19 A.4 Birefringent crystal 19 BS EN 61202-1:2017IEC 61202-1:2016 IEC 2016 3 (informative) Example of technology of optical waveguide isolator . 22 Annex BB.1 General . 22 B.2 TE mode . 22 B.3 TM mod

28、e 22 Bibliography 24 Figure 1 Configuration A Device containing integral fibre optic pigtails without connector 11 Figure 2 Configuration B Device containing integral fibre optic pigtails, with a connector on each pigtail 11 Figure 3 Configuration C Device containing connectors as an integral part o

29、f the device housing 11 Figure 4 Configuration D Device containing some combination of the interfacing features of the preceding configurations . 11 Figure 5 Standards currently under preparation . 16 Figure A.1 Polarization dependent optical isolator 20 Figure A.2 Polarization independent optical i

30、solator . 21 Figure B.1 Mode conversion type of the optical waveguide isolator 22 Figure B.2 Phase shifter type of the optical waveguide isolator 23 Figure B.3 TE mode and TM mode for optical waveguide isolator 23 Table 1 Two-level IEC specification structure . 12 Table 2 Standards interlink matrix

31、16 BS EN 61202-1:2017 4 IEC 61202-1:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC ISOLATORS Part 1: Generic specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for

32、 standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publish

33、es International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may par

34、ticipate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement b

35、etween the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publica

36、tions have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for

37、 any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the correspond

38、ing national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any s

39、ervices carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC

40、National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attenti

41、on is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC

42、shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61202-1 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. This fourth edition cancels and replaces the

43、 third edition published in 2009. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the terms and definitions were reconsidered; b) quality assessment level was deleted from classification; c) the clause nu

44、mbers of Annexes A and B have been rearranged. BS EN 61202-1:2017IEC 61202-1:2016 IEC 2016 5 The text of this International Standard is based on the following documents: CDV Report on voting 86B/3989A/CDV 86B/4033RVC Full information on the voting for the approval of this International Standard can

45、be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61202 series, published under the general title Fibre optic interconnecting devices and passive components Fibre optic isola

46、tors, can be found on the IEC website. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Use

47、rs should therefore print this document using a colour printer. BS EN 61202-1:2017 6 IEC 61202-1:2016 IEC 2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC ISOLATORS Part 1: Generic specification 1 Scope This part of IEC 61202 applies to isolators used in the field of fibre

48、 optics, all exhibiting the following features: they are non-reciprocal optical devices, in which each port is either an optical fibre or fibre optic connector; they are passive devices containing no opto-electronic or other transducing elements; they have two optical ports for directionally transmi

49、tting optical power. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60027 (all parts), Letter symbols to be used in electrical technology IEC 60050-731, International Ele