BS EN 61249-2-10-2003 Materials for printed boards and other interconnecting structures - Reinforced base materials clad and unclad - Cyanate ester brominated epoxide modified or ue.pdf

1、BRITISH STANDARDBS EN61249-2-10:2003IncorporatingCorrigendum No. 1Materials for printed boards and other interconnectingstructures Part 2-10: Reinforced base materials clad and unclad Cyanate ester,brominated epoxide, modified or unmodified, woven E-glass reinforcedlaminated sheets of defined flamma

2、bility (vertical burning test),copper-cladThe European Standard EN 61249-2-10:2003 has the status of aBritish StandardICS 31.180g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g

3、60g53g44g42g43g55g3g47g36g58BS EN 61249-2-10:2003This British Standard waspublished under the authorityof the Standards Policy andStrategy Committee on14 August 2003 BSI August 2006ISBN 0 580 42393 XNational forewordThis British Standard is the official English language version ofEN 61249-2-10:2003,

4、 including Corrigendum July 2005. It is identical withIEC 61249-2-10:2003.The UK participation in its preparation was entrusted to Technical CommitteeEPL/501, Electronic assembly technology, which has the responsibility to:A list of organizations represented on this committee can be obtained onreque

5、st to its secretary.Cross-referencesThe British Standards which implement international or Europeanpublications referred to in this document may be found in the BSI Catalogueunder the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electr

6、onic Catalogue or ofBritish Standards Online.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunityfrom legal obligations. aid enquirers to underst

7、and the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep theUK interests informed; monitor related international and European developments andpromulgate them in the UK.Summary of pagesThis document comprises a fr

8、ont cover, an inside front cover, the EN title page,pages 2 to 23 and a back cover.The BSI copyright date displayed in this document indicates when thedocument was last issued.Amendments issued since publicationAmd. No.16317 August 2006 Addition of caution to Foreword.Date CommentsEUROPEAN STANDARD

9、EN 61249-2-10NORME EUROPENNEEUROPISCHE NORMMay 2003 CENELECEuropean Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exp

10、loitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61249-2-10:2003 EICS 31.180 Incorporates Corrigendum July 2005English versionMaterials for printed boards and other interconnecting structuresPart 2-10: Reinforced base materials clad and unclad Cyanate ester,

11、brominated epoxide, modified or unmodified,woven E-glass reinforced laminated sheets of defined flammability(vertical burning test), copper-clad(IEC 61249-2-10:2003)Materiaux pour circuits imprimset autres structures dinterconnexionPartie 2-10: Matriaux de base renforcs,plaqus et non plaqus Feuilles

12、 stratifies renforcesen tissu de verre de type E esterde cyanate, poxyde brom,modifi ou non, dinflammabilit dfinie(essai de combustion verticale),plaques cuivre(CEI 61249-2-10:2003)Materialien fr Leiterplattenund andere VerbindungsstrukturenTeil 2-10: Kaschierte und unkaschierteverstrkte Basismateri

13、alien -Kupferkaschierte mit E-Glasgewebeverstrkte Laminattafeln auf der Basisvon Cyanatester mit bromhaltigemmodifiziertem oder nicht-modifiziertemEpoxidharz definierter Brennbarkeit(Brennprfung mit vertikaler Prflingslage)(IEC 61249-2-10:2003)This European Standard was approved by CENELEC on 2003-0

14、4-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtai

15、ned onapplication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central

16、Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,Netherlands, Norway, Portugal, Slovakia, Spain, Swe

17、den, Switzerland and United Kingdom. Page 2EN 61249210:2003Foreword The text of document 91/361/FDIS, future edition 1 of IEC 61249-2-10, prepared by IEC TC 91, Electronics assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61249-2-10 on 2003-04-01.

18、 The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-04-01 CAUTION:

19、EC directives including RoHS and WEEE may limit the use of some substances and this should be taken into account when applying this European Standard. Annexes designated “normative“ are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standar

20、d, annex ZA is normative and annexes A, B and C are informative. Annex ZA has been added by CENELEC. The contents of the corrigendum of July 2005 have been included in this copy. _ _ _ Endorsement notice The text of the International Standard IEC 61249-2-10:2003 was approved by CENELEC as a European

21、 Standard without any modification. _ _ _ CONTENTS 1 Scope.5 2 Normative references53 Materials and construction 5 3.1 Resin system.6 3.2 Reinforcement .6 3.3 Metal foil .64 Internal marking6 5 Electrical properties 6 6 Non-electrical properties of the copper-clad laminate 7 6.1 Appearance of the co

22、pper-clad sheet.7 6.2 Appearance of the unclad face.8 6.3 Laminate thickness8 6.4 Bow and twist 9 6.5 Properties related to the copper foil bond.10 6.6 Punching and machining10 6.7 Dimensional stability11 6.8 Sheet sizes11 6.9 Cut panels.11 7 Non-electrical properties of the base material after comp

23、lete removal of the copper foil 12 7.1 Appearance of the dielectric base material.12 7.2 Flexural strength13 7.3 Flammability 13 7.4 Water absorption .14 7.5 Measling14 7.6 Glass transition temperature and cure factor14 8 Quality assurance .158.1 Quality system .15 8.2 Responsibility for inspection.

24、15 8.3 Qualification inspection15 8.4 Quality conformance inspection .15 8.5 Certificate of conformance.15 8.6 Safety data sheet.15 9 Packaging and marking.16 10 Ordering information .16Annex A (informative) Engineering information .17 Annex B (informative) Common laminate constructions.19 Annex C (

25、informative) Guideline for qualification and conformance inspection.21 Annex ZA (normative) Normative references to international publications with their corresponding European publications22 Bibliography23 Page 3EN 61249210:2003Table 1 Electrical properties .6 Table 2 Nominal thickness and toleranc

26、e of metal-clad laminate.9 Table 3 Bow and twist 9 Table 4 Pull-off and peel strength .10 Table 5 Dimensional stability11Table 6 Size tolerance for cut panels12 Table 7 Rectangularity of cut panels.12 Table 8 Flexural strength13Table 9 Flammability 13 Table 10 Water absorption .14 Table 11 Measling1

27、4 Table 12 Glass transition temperature and cure factor 14 Page 4EN 61249210:2003MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES Part 2-10: Reinforced base materials clad and unclad Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets

28、 of defined flammability (vertical burning test), copper-clad 1 Scope This part of IEC 61249 gives requirements for properties of cyanate ester, brominated epoxide modified or unmodified woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad, in thicknesses of 0,0

29、5 mm to 3,2 mm. The flammability rating is achieved through the use of brominated fire retardants contained as an integral part of the epoxide polymeric structure. The glass transition temperature is defined to be 160 C minimum. Some property requirements may have several classes of performance. The

30、 class desired needs to be specified on the purchase order otherwise the default class of material may be supplied. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refe

31、rences, the latest edition of the referenced document (including any amendments) applies. IEC 61189-2:1997, Test methods for electrical materials, interconnection structures and assemblies Part 2: Test methods for materials for interconnection structuresIEC 61249-5-1:1995, Materials for interconnect

32、ion structures Part 5: Sectional specification set for conductive foils and films with and without coatings Section 1: Copper foils (for the manufacture of copper-clad base materials)ISO 9000:2000, Quality management systems Fundamentals and vocabularyISO 11014-1:1994, Safety data sheet for chemical

33、 products Part 1: Content and order of sections ISO 14001:1996, Environmental management systems Specification with guidance for use3 Materials and construction The sheet consists of an insulating base with metal-foil bonded to one side or both. Page 5EN 61249210:20033.1 Resin system Cyanate ester,

34、brominated epoxide, modified or unmodified, resulting in a laminate with a glass transition temperature of 160qC minimum. Contrast agents may be added to enhance processing such as automated optical inspection (AOI). Its flame resistance is defined in terms of the flammability requirements of 7.3.3.

35、2 Reinforcement Woven E-glass as specified in IEC 61249-6-3, woven E-glass fabric (for the manufacture of prepreg and copper clad materials). 3.3 Metal foil Copper as specified in IEC 61249-5-1, copper foil (for the manufacture of copper-clad materials). The preferred foils are electro-deposited of

36、defined ductility. 4 Internal marking Not specified. 5 Electrical properties The requirements for the electrical properties are shown in Table 1. Table 1 Electrical properties Property Test method (IEC 61189-2) Requirement Resistance of foil 2E12 As specified in IEC 61249-5-1 Surface resistance afte

37、r damp heat while in the humidity chamber (optional) 2E03 t10 000 M:Surface resistance after damp heat and recovery 2E03 t50 000 M:Volume resistivity after damp heat while in the humidity chamber (optional) 2E04 t10 000 M:mVolume resistivity after damp heat and recovery 2E04 t50 000 M:mRelative perm

38、ittivity after damp heat and recovery at 1 MHz 2E10 d4,7 Dissipation factor after damp heat and recovery at 1MHz 2E10 d0,015 Electric strength (only for material thicknesses 0,10 d0,15 0,15 d0,30 0,30 d0,50 0,50 d0,80 0,80 d1,00 1,00 d1,30 t0,80 d1,00 1,00 d1,30 1,30 d1,70 1,70 d2,10 2,10 d2,60 2,60

39、 d3,20 0,03 0,04 0,05 0,08 0,09 0,13 0,17 0,20 0,23 0,25 0,30 0,02 0,03 0,04 0,05 0,06 0,09 0,11 0,13 0,15 0,18 0,20 0,01 0,02 0,03 0,04 0,05 0,07 0,08 0,10 0,12 0,15 0,15 The thicknesses and tolerances do not apply to the outer 25 mm of the trimmed sheet or the outer 13 mm of the cut panel as manuf

40、actured and delivered by the supplier. At no point shall the thickness vary from the nominal by a value greater than 125 % of the specified tolerance. 6.4 Bow and twist When the copper-clad laminate is tested in accordance with test method 2M01of IEC 61189-2, the bow and twist shall not exceed the v

41、alues given in Table 3. Table 3 Bow and twist Requirement %Property Test method (IEC 61189-2) Nominal thickness mmPanel dimension longest side mmCopper foil on one side Copper foil on both sides t0,8 d1,3 d350350 d500500d2,0 d1,8 d1,5 d1,5 d1,3 d1,0 1,3 d1,7 d350350 d500500d1,5 d1,3 d1,0 d1,0 d0,8 d

42、0,5 Bow and twist 2M01 1,7 d3,2 d350350 d500500d1,0 d0,8 d0,5 d0,5 d0,4 d0,3 NOTE The requirements for bow and twist apply only to one-sided copper-clad laminates with maximum foil thickness of 105 Pm (915 g/m2) and double-sided copper-clad laminates with a maximum foil thickness difference of 70 Pm

43、 (610 g/m2). Requirements for laminates with copper foil configurations beyond these limits are subject to agreement between purchaser and supplier. Page 9EN 61249210:20036.5 Properties related to the copper foil bond Pull-off and peel strength requirements are shown in Table 4. These requirements a

44、pply to copper foil with a normal profile depth. In the case of low or very low profile copper foil, the requirements shall be at least 50 % of that shown in Table 4 as a minimum. Table 4 Pull-off and peel strength Property Test method (IEC 61189-2) Requirement t20 N Thickness of the copper foil Pul

45、l-off strength 2M05 d12 Pm(d101 g/m2)18 Pm(152 g/m2)35 Pm(305 g/m2)t70 Pm(t610 g/m2)t0,6 N/mm t0,8 N/mm t1,0 N/mm t1,1 N/mm Peel strength after heat shock of 20 s 2M14 No blistering nor delamination t0,3 N/mm t0,4 N/mm t0,5 N/mm t0,7 N/mm Peel strength after dry heat 150 C 2M15 No blistering nor del

46、amination t0,4 N/mm t0,6 N/mm t0,8 N/mm t0,9 N/mm Peel strength after exposure to solvent vapour. Solvents as agreed upon between purchaser and supplier 2M06 No blistering nor delamination t0,5 N/mm t0,7 N/mm t0,8 N/mm t0,9 N/mm Peel strength after simulated plating 2M16 No blistering nor delaminati

47、on Peel strength at high temperature Temperature 125 C (optional) Temperature 260 C (optional) 2M17 t0,3 N/mm Not specified t0,4 N/mm Not specified t0,5 N/mm Not specified t0,6 N/mm Not specified Blistering after 20 s heat shock 2C05 No blistering nor delamination NOTE In case of difficulty due to b

48、reakage of the foil or reading range of the force-measuring device, the measurement of peel strength at high temperature may be carried out using conductor widths of more than 3 mm. 6.6 Punching and machining Punching is not applicable. The laminate shall, in accordance with the manufacturers recom-

49、mendations, be capable of being sheared or drilled. Delamination at the edges due to the shearing process is permissible, provided that the depth of delamination is not larger than the thickness of the base material. Delamination at the edges of drilled holes due to the drilling process is not permissible. Drilled holes shall be capable of being through-plated with no interference from any exudati