BS EN 61375-1-2012 Electronic railway equipment Train communication network (TCN) General architecture《铁路电子设备 列车通信网络(TCN) 通用结构》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationElectronic railway equipment Train communication network (TCN)Part 1: General architectureBS EN 61375-1:2012National forewordThis British Standard is the UK implementation of EN

2、61375-1:2012. It is identical to IEC 61375-1:2012.The UK participation in its preparation was entrusted by Technical Committee GEL/9, Railway Electrotechnical Applications, to Panel GEL/9/-/4, Railway applications - Train communication network and multimedia systems.A list of organizations represent

3、ed on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012 ISBN 978 0 580 68

4、226 1 ICS 45.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS E

5、N 61375-1:2012EUROPEAN STANDARD EN 61375-1 NORME EUROPENNE EUROPISCHE NORM August 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brusse

6、ls 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61375-1:2012 E ICS 45.060 English version Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture (IEC 61375-1:2012) Matriel lectroniq

7、ue ferroviaire - Rseau embarqu de train (TCN) - Partie 1: Architecture gnrale (CEI 61375-1:2012) Elektronische Betriebsmittel fr Bahnen - Zug-Kommunikations-Netzwerk (TCN) - Teil 1: Allgemeiner Aufbau (IEC 61375-1:2012) This European Standard was approved by CENELEC on 2012-07-26. CENELEC members ar

8、e bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

9、the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Manag

10、ement Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ire

11、land, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61375-1:2012EN 61375-1:2012 Foreword The text of document 9/1641/FDIS, future edition 3 of IEC 61375-1, prepared

12、 by IEC/TC 9 “Electrical equipment and systems for railways“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61375-1:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national sta

13、ndard or by endorsement (dop) 2013-04-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-07-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not

14、be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) se

15、e informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 61375-1:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for

16、the standards indicated: IEC 61375-2-1 NOTE Harmonized as EN 61375-2-1. IEC 61375-3-1 NOTE Harmonized as EN 61375-3-1. BS EN 61375-1:2012EN 61375-1:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in

17、whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publicat

18、ion has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year ISO/IEC 7498-1 - Information technology - Open Systems Interconnection - Basic Reference Model: The Basic Model - - ISO/IEC 8824-1 2002 Information technology - Abstract S

19、yntax Notation One (ASN.1): Specification of basic notation - - ISO/IEC 9646-1 1994 Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts - - ISO/IEC 19501 2005 Information technology - Open Distributed Processing - Unified M

20、odeling Language (UML) - - UIC CODE 556 - Information transmission in the train (train-bus) - - BS EN 61375-1:2012EN 61375-1:2012 Annex ZZ (informative) Coverage of Essential Requirements of EU Directives This European Standard has been prepared under a mandate given to CENELEC by the European Commi

21、ssion and the European Free Trade Association and within its scope the standard covers all relevant essential requirements as given in Annex III of the EU Directive 2008/57/EC. Compliance with this standard provides one means of conformity with the specified essential requirements of the Directive c

22、oncerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 61375-1:201261375-1 IEC:2012 CONTENTS INTRODUCTION . 7 1 Scope . . 8 2 Normative references. . 8 3 Terms, definitions, abbreviated terms, acronyms, and con

23、ventions 8 3.1 Terms and definitions . 8 3.2 Abbreviations and acronyms 15 3.3 Conventions . 16 3.3.1 Requirement conventions 16 3.3.2 Base of numeric values . 16 3.3.3 Naming conventions. 16 3.3.4 State diagram conventions . 16 4 Basic architecture 16 4.1 Contents of this clause . 16 4.2 General .

24、. 16 4.2.1 Technology classes . 16 4.2.2 Component types . 17 4.3 Hierarchical structure 17 4.3.1 Network levels 17 4.3.2 Train backbone level 17 4.3.3 Consist network level . . 18 4.3.4 Interface between train backbone and consist network . . 18 4.3.5 End devices connected to train backbone . 19 4.

25、4 Network configurations . 19 4.5 Train to ground connection (option) . . 20 5 Train backbone . . 21 5.1 Contents of this clause . 21 5.2 Train backbone topology . . 21 5.2.1 General . 21 5.2.2 Train backbone based on bus technology . 21 5.2.3 Train backbone based on switched technology 22 5.3 Train

26、 compositions . 22 5.4 Train backbone node numbering . 23 5.5 Train directions . . 23 5.5.1 Vehicle . . 23 5.5.2 Consist . . 23 5.5.3 Closed train . . 24 5.5.4 Train . 24 5.6 Train inauguration 26 5.6.1 Objectives . 26 5.6.2 Train network directory . 26 5.6.3 Inauguration control . 28 5.6.4 Node sta

27、tes . . 29 5.6.5 Node roles . 32 5.6.6 Performance . 32 6 Consist network . 32 BS EN 61375-1:201261375-1 IEC:2012 6.1 Contents of this clause . 32 6.2 Scope of standardization. . 32 6.3 Consist network topology . 33 6.3.1 Consist network based on bus technology (MVB, CANopen) . 33 6.3.2 Consist netw

28、ork based on switched technology . 34 6.3.3 Sub-networks 36 6.3.4 Heterogeneous consist network . . 36 6.4 Gateway . 36 6.4.1 General . 36 6.4.2 Functional description . 37 6.4.3 Application layer gateway 37 6.4.4 Gateway implemented by a router . 39 7 On-board data communication . . 39 7.1 General

29、. . 39 7.2 Communication patterns . . 39 7.2.1 Purpose . 39 7.2.2 Definitions . 39 7.2.3 Push pattern . 40 7.2.4 Pull pattern . 41 7.2.5 Subscription pattern . 43 7.3 Addressing . 43 7.3.1 General . 43 7.3.2 Network layer addressing 43 7.3.3 Application layer addressing . 45 7.4 Availability of data

30、 communication . 45 7.5 Data classes . 46 7.5.1 General . 46 7.5.2 Service parameters 46 7.5.3 TCN data class definition 47 7.6 Communication profile 48 Bibliography . 49 Figure 1 Train backbone and consist network . 17 Figure 2 Consist with two consist networks . 18 Figure 3 End device connected to

31、 the train backbone (example) . 19 Figure 4 Communication between train and ground (example) . 21 Figure 5 Interfaces between consists 21 Figure 6 Train backbone bus topology . 22 Figure 7 Train backbone switched topology . . 22 Figure 8 Directions and orientation in a vehicle . 23 Figure 9 Directio

32、ns and orientations in a consist . . 24 Figure 10 Directions and orientations in a closed train . . 24 Figure 11 Directions and orientations in train (TCN directions) . 25 Figure 12 Structure of train network directory (example) . 27 Figure 13 Train inauguration block diagram . . 30 Figure 14 Train

33、inauguration state chart 31 Figure 15 Consist network standard interfaces 33 BS EN 61375-1:201261375-1 IEC:2012 Figure 16 Consist network (bus technology) . . 34 Figure 17 Consist switches . 34 Figure 18 Examples of consist network topologies (switched technology) . 35 Figure 19 End Device connected

34、 to two consist switches 35 Figure 20 Sub-networks in a consist network . . 36 Figure 21 Implementation example for two vehicle busses 36 Figure 22 Example of heterogeneous train control network architecture . 37 Figure 23 Local service . . 38 Figure 24 Unconfirmed service 38 Figure 25 Confirmed ser

35、vice . . 38 Figure 26 Provider initiated services . 39 Figure 27 Point to point communication pattern (push) . . 40 Figure 28 Point to multi-point communication pattern (push) . . 41 Figure 29 Point to point communication pattern (pull) . 41 Figure 30 Point to multi-point communication pattern (push

36、) . . 42 Figure 31 Subscription communication pattern 43 Table 1 Train composition changes 22 Table 2 Train network specific parameters (example) . 27 Table 3 Consist network specific parameters (example) 27 Table 4 Vehicle specific parameters (example) . 28 Table 5 Device specific parameters (examp

37、le) 28 Table 6 Service parameters . 46 Table 7 Principal data classes . 47 BS EN 61375-1:201261375-1 IEC:2012 7 INTRODUCTION IEC 61375-1 defines the general architecture of the Train Communication Network (TCN) so as to achieve compatibility between consist networks defined by this part of IEC 61375

38、 and train backbones defined by this part of IEC 61375. The TCN has a hierarchical structure with two levels of networks, a train backbone and a consist network: a) for interconnecting vehicles in close or open trains, this part of IEC 61375 specifies train backbones with different characteristics;

39、b) for connecting standard on-board equipment, this part of IEC 61375 specifies consist networks with different characteristics. The general architecture of the TCN, which is defined in this part of the standard, shall c) establish the rules for interconnecting consist networks with train backbones,

40、 as identifying the interfaces; defining the principles of how train topology changes can be discovered; defining the basic communication services provided by train backbones to be used by consist networks; d) establish basic rules for the train backbone and for the consist network; e) establish rul

41、es for communalities in operation, as: patterns for the communication between users; addressing principles; data classes to be supported. BS EN 61375-1:2012 8 61375-1 IEC:2012 ELECTRONIC RAILWAY EQUIPMENT TRAIN COMMUNICATION NETWORK (TCN) Part 1: General architecture 1 Scope This part of IEC 61375 a

42、pplies to the architecture of data communication systems in open trains, i.e. it covers the architecture of a communication system for the data communication between vehicles of the said open trains, the data communication within the vehicles and the data communication from train to the ground. The

43、applicability of this part of IEC 61375 to the train network technologies allows for interoperability of individual vehicles within open trains in international traffic. The data communication systems inside vehicles are given as recommended solutions to cope with the said TCN. In any case, proof of

44、 compatibility between a proposed train backbone and a proposed consist network will have to be brought by the supplier. This part of IEC 61375 may be additionally applicable to closed trains and multiple unit trains when so agreed between purchaser and supplier. NOTE 1 For a definition of open trai

45、ns, multiple unit trains and closed trains, see Clause 3. NOTE 2 Road vehicles such as buses and trolley buses are not considered in this part of IEC 61375. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its

46、application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 7498-1, Information Technology Open Systems Interconnection Basic Reference Model: The Basic Model ISO/IEC 8824-1:2002,

47、 Information technology Abstract Syntax Notation One (ASN.1): specification of basic notation ISO/IEC 9646-1:1994, Information technology Open Systems Interconnection Conformance testing methodology and framework Part 1: General concepts ISO/IEC 19501:2005, Information technology Open Distributed Pr

48、ocessing Unified Modeling Language (UML) Version 1.4.2 UIC CODE 556, Information transmission in the train (train-bus) 3 Terms, definitions, abbreviated terms, acronyms, and conventions 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. BS EN 6137

49、5-1:201261375-1 IEC:2012 9 3.1.1 active train backbone node train backbone node receiving a sequence number during inauguration and forwarding user data packets between consist network and train backbone 3.1.2 application layer upper layer in the OSI model, interfacing directly to the Application 3.1.3 application layer interface definition of the services offered by the application layer 3.1.4 application process an el