BS EN 61747-30-1-2012 Liquid crystal display devices Measuring methods for liquid crystal display modules Transmissive type《液晶显示设备 液晶显示模块的测量方法 透射型》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationLiquid crystal display devicesPart 30-1 : Measuring methods for liquid crystal display modules Transmissive typeBS EN 61747-30-1:2012National forewordThis British Standard is the

2、 UK implementation of EN 61747-30-1:2012. It is identical to IEC 61747-30-1:2012. It supersedes BS EN 61747-6:2004, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/47, Semiconductors.A list of organizations represented on this committee can be obta

3、ined on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012 ISBN 978 0 580 67017 6 ICS 31.120 Compliance with

4、 a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Stan-dards Policy and Strategy Committee on 30 September 2012.Amendments issued since publicationDate Text affectedBRITISH STANDARDBS EN 61747-30-1:2012EUROPEAN STANDARD E

5、N 61747-30-1 NORME EUROPENNE EUROPISCHE NORM August 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights o

6、f exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61747-30-1:2012 E ICS 31.120 Supersedes EN 61747-6:2004English version Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type (IEC 61747-30-1:

7、2012) Dispositifs daffichage a cristaux liquides - Partie 30-1: Mthodes de mesure pour les modules daffichage cristaux liquides - Type transmissif (CEI 61747-30-1:2012) Flssigkristall-Anzeige-Bauelemente - Teil 30-1 Messverfahren fr Flssigkristall-Anzeigemodule - Transmissive Ausfhrung (IEC 61747-30

8、-1:2012) This European Standard was approved by CENELEC on 2012-07-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog

9、raphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

10、nsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finla

11、nd, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61747-30-1:2012EN 61747

12、-30-1:2012 - 2 - Foreword The text of document 110/364/FDIS, future edition 1 of IEC 61747-30-1, prepared by IEC/TC 110 “Electronic display devices“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61747-30-1:2012. The following dates are fixed: latest date by which the d

13、ocument has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-04-30 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-07-30 This document supersedes EN 61747-6:2004. EN 61747-30-1:

14、2012 includes the following significant technical changes with respect to EN 61747-6:2004: a) the document structure was brought in line with EN 61747-6-2; and b) various technical and editorial changes were made. This standard is to be read in conjunction with EN 61747-1:1999, to which it refers, w

15、hich gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements, and the test and measurement procedures required for the assessment of liquid crystal display modules. Attention is drawn to the possibility that some of the elements of

16、this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61747-30-1:2012 was approved by CENELEC as a European Standard without any modification. BS

17、 EN 61747-30-1:2012- 3 - EN 61747-30-1:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For

18、dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Ye

19、ar Title EN/HD Year IEC 60050 Series International electrotechnical vocabulary - - IEC 61747-1 - Liquid crystal and solid-state display devices - Part 1: Generic specification EN 61747-1 - IEC 61747-6-2 - Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules

20、 - Reflective type EN 61747-6-2 - ISO 9241-307 - Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays EN ISO 9241-307 - ISO 11664-2 - Colorimetry - Part 2: CIE standard illuminants EN ISO 11664-2 - CIE 15 2004 Colorimetry - - BS EN 61

21、747-30-1:2012 2 61747-30-1 IEC:2012 CONTENTS INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms, definitions and abbreviations 8 3.1 Terms and definitions 8 3.2 Abbreviations 9 4 Illumination and illumination geometry 9 4.1 General comments and remarks on the measurement of transmissive

22、 LCDs . 9 4.2 Viewing-direction coordinate system 9 4.3 Standard illumination geometries . 10 5 Standard measurement equipment and set-up 11 5.1 Light measuring devices (LMD) . 11 5.2 Positioning and alignment . 11 5.3 Standard measurement arrangements . 11 5.3.1 LMD conditions 11 5.3.2 Effects of r

23、eceiver inclination . 11 5.4 Standard locations of measurement field . 12 5.4.1 Matrix displays 12 5.4.2 Segment displays 13 5.5 Standard DUT operating conditions . 13 5.5.1 General . 13 5.5.2 Standard ambient conditions . 13 5.6 Standard measuring process . 13 6 Standard measurements and evaluation

24、s . 14 6.1 Luminance photometric 14 6.1.1 Purpose . 14 6.1.2 Measurement equipment . 14 6.1.3 Measurement method 14 6.1.4 Definitions and evaluations 15 6.2 Contrast ratio 15 6.2.1 Purpose . 15 6.2.2 Measurement equipment . 15 6.2.3 Measurement method 15 6.2.4 Definitions and evaluations 16 6.2.5 Sp

25、ecified conditions 16 6.3 Chromaticity and reproduction of colour 17 6.3.1 Purpose . 17 6.3.2 Measurement equipment . 17 6.3.3 Measurement method: photoelectric tristimulus colorimetry . 17 6.3.4 Measurement method spectrophotometric colorimetry . 17 6.3.5 Definitions and evaluations 17 6.3.6 Specif

26、ied conditions 19 6.4 Viewing angle range 19 6.4.1 Purpose . 19 BS EN 61747-30-1:201261747-30-1 IEC:2012 3 6.4.2 Measurement equipment . 19 6.4.3 Contrast and luminance based viewing angle range. 19 6.4.4 Viewing angle range without grey-level inversion . 20 6.4.5 Chromaticity based viewing angle ra

27、nge 21 6.4.6 Visual quality-based viewing angle range 21 6.5 Electro-optical transfer function photometric . 22 6.5.1 Purpose . 22 6.5.2 Measurement equipment . 22 6.5.3 Measurement method 22 6.5.4 Evaluation and representation . 22 6.6 Electro-optical transfer function colorimetric . 23 6.6.1 Purpo

28、se . 23 6.6.2 Set-up . 23 6.6.3 Measurement method 23 6.6.4 Definitions and evaluations 23 6.7 Lateral variations (photometric, colorimetric) . 24 6.7.1 Purpose . 24 6.7.2 Measurement equipment . 24 6.7.3 Uniformity of luminance . 24 6.7.4 Uniformity of white . 25 6.7.5 Uniformity of chromaticity 25

29、 6.7.6 Uniformity of primary colours . 25 6.7.7 Cross-talk 26 6.7.8 Mura 28 6.7.9 Image sticking . 28 6.7.10 Specified conditions 28 6.8 Reflectance from the active area surface . 28 6.8.1 Purpose . 28 6.8.2 Measurement equipment . 29 6.8.3 Measurement method 29 6.8.4 Definitions and evaluation . 30

30、 6.8.5 Specified conditions 30 6.9 Spectral transmittance factor . 30 6.9.1 Purpose . 30 6.9.2 Measurement equipment . 31 6.9.3 Definitions and evaluation . 31 6.10 Temporal variations . 32 6.10.1 Response time 32 6.10.2 Flicker / frame response (multiplexed displays) . 34 6.10.3 Critical flicker fr

31、equency 36 6.10.4 Specified conditions 36 6.11 Electrical characteristics 37 6.11.1 Purpose . 37 6.11.2 Measurement equipment . 37 6.11.3 Measurement method 37 6.11.4 Definitions and evaluations 38 6.11.5 Specified conditions 38 6.12 Warm-up characteristics 39 6.12.1 Purpose . 39 BS EN 61747-30-1:20

32、12 4 61747-30-1 IEC:2012 6.12.2 Measurement equipment . 39 6.12.3 Measurement method 39 6.12.4 Specified conditions 40 Annex A (informative) Standard measuring conditions . 41 Annex B (informative) Devices for thermostatic control 44 Annex C (informative) Measuring the electro-optical transfer funct

33、ion 45 Annex D (informative) Planned future structure 46 Bibliography 47 Figure 1 Representation of the viewing-direction (equivalent to the direction of measurement) by the angle of inclination, and the angle of rotation (azimuth angle), in a polar coordinate system . 10 Figure 2 Shape of measuring

34、 spot on DUT for two angles of LMD inclination . 12 Figure 3 Standard measurement positions are at the centres of all rectangles p0-p24. . 12 Figure 4 Example of gray-scale inversion . 21 Figure 5 Example of standard set-up for specular reflection measurements . 29 Figure 6 Example of equipment for

35、measurement of temporal variations 32 Figure 7 Relationship between driving signal and optical response times . 34 Figure 8 Frequency characteristics of the integrator (response of human visual system) . 35 Figure 9 Example of power spectrum . 36 Figure 10 Checker-flag pattern for current and power

36、consumption measurements . 37 Figure 11 Example of measuring block diagram for current and power consumption of a liquid crystal display device 39 Figure 12 Example of warm-up characteristic . 40 Figure A.1 Terminology for LMDs . 42 BS EN 61747-30-1:201261747-30-1 IEC:2012 7 INTRODUCTION In order to

37、 achieve a useful and uniform description of the performance of liquid crystal display (LCD) devices, specifications for commonly accepted relevant parameters are put forward. These fall into the following categories: a) general type specification (e.g. pixel resolution, diagonal, pixel layout); b)

38、optical specification (e.g. contrast ratio, response time, viewing-direction, crosstalk, etc.); c) electrical specification (e.g. power consumption, electromagnetic compatibility); d) mechanical specification (e.g. module geometry, weight); e) specification of passed environmental endurance test; f)

39、 specification of reliability and hazard / safety. In most of the cases a) to f), the specification is self-explanatory. For some specification points however, notably in the area of optical and electrical performance, the specified value may depend on the measuring method. The purpose of this stand

40、ard is to indicate and list the procedure-dependent parameters and to prescribe the specific methods and conditions that are to be used for their uniform numerical determination. It is assumed that all measurements are performed by personnel skilled in the general art of radiometric and electrical m

41、easurements as the purpose of this standard is not to give a detailed account of good practice in electrical and optical experimental physics. Furthermore, it shall be assured that all equipment is suitably calibrated as is known to people skilled in the art and records of the calibration data and t

42、raceability are kept. BS EN 61747-30-1:2012 8 61747-30-1 IEC:2012 LIQUID CRYSTAL DISPLAY DEVICES Part 30-1: Measuring methods for liquid crystal display modules Transmissive type 1 Scope This part of IEC 61747 is restricted to transmissive liquid crystal display-modules using either segment, passive

43、 or active matrix and achromatic or colour type LCDs. Furthermore, the transmissive modes of transflective LCD modules with backlights ON are comprised in this document. An LCD module in combination with a touch-panel or a front-light-unit is excluded from the scope because measurements are frequent

44、ly inaccurate. Touch-panels or front-light-units are removed before measurement. Throughout the main body of this standard, an integrated backlight is assumed to provide the illumination for the measurements. Deviations from this (e.g. segmented displays without integrated backlights) may usually be

45、 handled in the same way as display modules with integrated backlight, if an external backlight is provided. However, in the case where one of the two situations should be handled differently, this will be specifically stated. 2 Normative references The following documents, in whole or in part, are

46、normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050 (all parts), International Electrotechnical Voc

47、abulary (available at ) IEC 61747-1, Liquid crystal and solid-state display devices Part 1: Generic specification IEC 61747-6-2, Liquid crystal display devices Part 6-2: Measuring methods for liquid crystal display modules Reflective type ISO 9241-307, Ergonomics of human-system interaction Part 307

48、: Analysis and compliance test methods for electronic visual displays ISO 11664-2 (CIE S 014-2/E:2006), Colorimetry Part 2: CIE Standard illuminants CIE 15-2004, Colorimetry 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions

49、given in IEC 60050-845:1987 apply. NOTE Several points of view with respect to the preferred terminology on “monochrome“, “achromatic“, “chromatic“, “colour“, “full-colour“, etc. can be encountered in the field amongst spectroscopists, physicists, colour-perception scientists, physical engineers and electrical engineers. In general, all LCDs demonstrate some sort of chromaticity (e.g. as a function of viewing angle, ambient temperature or externally addressable means). Pending d