BS EN 61753-042-2-2014 Fibre optic interconnecting devices and passive components Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for cate.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C Controlled environmentsBS EN 61753-042-2:2014National forewordThis British Standard is the UK implem

2、entation of EN 61753-042-2:2014. Itis identical to IEC 61753-042-2:2014.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this co

3、mmittee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 81740 3ICS 33.180

4、.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments issued since publicationDate Text affectedBRITISH STANDARDBS EN 61753-042-2:2014EUROP

5、EAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61753-042-2 October 2014 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled envi

6、ronments (IEC 61753-042-2:2014) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 042-2: Dispositifs de rflexion pour OTDR de modle fiche-fibre amorce et modle fiche-embase pour catgorie C - Environnements contrls (CEI 61753-042-2:2014) Lichtwellenleit

7、er - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 042-2: OTDR-Reflektorbauteile in Steckverbinder-Pigtail- und Steckverbinder-Buchse-Bauform fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-042-2:2014) This European Standard was approved by CENELEC on 2014-09-25. CENELEC

8、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl

9、ication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CE

10、NELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, I

11、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Eur

12、opisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61753-042-2:2014 E BS EN 61753-042-2:2014EN 61753-042-2:2014 - 2 - F

13、oreword The text of document 86B/3709/CDV, future edition 1 of IEC 61753-042-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-042-2:2014. The following dat

14、es are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-06-25 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-09-25 Attention is dra

15、wn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-042-2:2014 was approved by CENELEC

16、 as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61753-1:2007 NOTE Harmonised as EN 61753-1:2007 BS EN 61753-042-2:2014- 3 - EN 61753-042-2:2014 Annex ZA (normative) Normative references to

17、 international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edi

18、tion of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex

19、is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61300 series Fibre optic interconnecting devices and passive components - Basic test and

20、 measurement procedures EN 61300 series IEC 61300-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 1: General and guidance EN 61300-1 IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement proce

21、dures Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive comp

22、onents - Basic test and measurement procedures Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-14: Tests - Maximum input power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnectin

23、g devices and passive components - Basic test and measurement procedures Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18

24、- BS EN 61753-042-2:2014EN 61753-042-2:2014 - 4 - Publication Year Title EN/HD Year IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnec

25、ting devices and passive components - Basic test and measurement procedures Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-42: Tests - Static side load for strain reli

26、ef EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - B

27、asic test and measurement procedures Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-7 (mod) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-7: Examination

28、s and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - BS EN 61753-042-2:2014 2 IEC 61753-042-2:2014 IEC 2014 CONTENTS 1 Scope 5 2 Normative references. 5 3 Terms, definitions and abbreviations 6 3.1 Terms and definitions 6 3.2 Abbreviation

29、s 6 4 Test 7 5 Test report. 7 6 Reference components 7 7 Performance requirements . 7 7.1 Dimensions . 7 7.2 Sample size 7 7.3 Test details and requirements 7 Annex A (normative) Sample size . 14 Annex B (informative) General information of OTDR reflecting devices . 15 Bibliography . 16 Figure B.1 E

30、xamples of structure of OTDR reflecting device . 15 Figure B.2 Picture of OTDR reflecting device 15 Table 1 Test details and requirements for plug-pigtail style (1 of 4) . 7 Table 2 Test details and requirements for plug-receptacle style (1 of 3) 11 Table A.1 Number of plug-pigtail style samples for

31、 each test . 14 Table A.2 Number of plug-receptacle style samples for each test 14 BS EN 61753-042-2:2014IEC 61753-042-2:2014 IEC 2014 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices fo

32、r category C Controlled environments 1 Scope This part of IEC 61753 contains the minimum initial performance, test and measurement requirements and severities which plug-pigtail style and plug-receptacle style OTDR reflecting devices need to satisfy in order to be categorized as meeting the requirem

33、ents of category C-Controlled environments, as defined in Annex A of IEC 61753-1:2007 11. They are for out-of-band OTDR testing of an optical fibre system. Annex B of this standard provides information concerning this device. 2 Normative references The following documents, in whole or in part, are n

34、ormatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product specific

35、ations Sectional specification for class B single-mode fibres IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1:

36、General and guidance IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: TestsF

37、ibre/cable retention IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests High optical po

38、wer IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold 1Numbers in square brackets refer to the Bibliography. BS EN 61753-042-2:2014 6 IEC 61753-042-2:2014 IEC 2014 IEC 61300-2-18, Fibre optic interconnecting devices

39、 and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22, Fibre optic in

40、terconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44,

41、Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examination

42、and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode

43、 components 3 Terms, definitions and abbreviations For the purposes of this document, the following terms and definitions apply. 3.1 Terms and definitions 3.1.1 OTDR reflecting device optical filter having two ports that light from the signal wavelength ranges transmits from the first port to the se

44、cond port and OTDR light from the OTDR wavelength range launched into one port is (partly) reflected back to that launch port Note 1 to entry: It is used for out of band testing of optical fibre systems. 3.2 Abbreviations FBG Fibre Bragg grating PDL Polarisation dependent loss ONU Optical network un

45、it OTDR Optical time-domain reflectometer TFF Thin-film filtre BS EN 61753-042-2:2014IEC 61753-042-2:2014 IEC 2014 7 4 Test Unless otherwise specified, all test methods are in accordance with the IEC 61300 series. Each test defines the number of samples to be evaluated. The samples used for each tes

46、t are intended to be previously unstressed new samples but may also be selected from previously used samples if desired. The plug-pigtail style samples shall be terminated onto single-mode fibres as per IEC 60793-2-50 category B1.1, B1.3 or B6 in either coated fibres (primary and secondary) or reinf

47、orced cable format. For plug-receptacle style samples fibres as per IEC 60793-2-50 category B1.1, B1.3 or B6 shall be used. All measurements shall be carried out at standard atmosphere condition defined in IEC 61300-1, unless otherwise stated. All tests shall be carried out over the operating wavele

48、ngth range: the signal wavelength ranges of 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm and 1 550 nm to 1 560 nm, and the OTDR wavelength of 1 620 nm to 1 630 nm or 1 645 nm to 1 655 nm, unless otherwise specified. NOTE 1 310 nm, 1 490 nm and 1 550 nm are the nominal or centre wavelengths, stated for

49、 the ranges 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm and 1 550 nm to 1 560 nm as defined in ITU-T Recommendations G.983.3 2, G.984.2 3 and IEEE standard 802.3ah-2004 4. 5 Test report Fully documented test reports and supporting evidences shall be prepared and be available for inspections as evidence that the tests have been carried out and complied with. 6 Reference components The tes