BS EN 61754-19-2002 Fibre optic connector interfaces - Type SG connector family《光纤连接器接口 SG型连接器系列》.pdf

1、BRITISH STANDARD BS EN 61754-19:2002 IEC 61754-19:2001 Fibre optic connector interfaces Part 19: Type SG connector family The European Standard EN 61754-19:2002 has the status of a British Standard ICS 33.180.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 61754-19:200

2、2 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 20 February 2002 BSI 20 February 2002 ISBN 0 580 39015 2 National foreword This British

3、Standard is the official English language version of EN 61754-19:2002. It is identical with IEC 61754-19:2001. It supersedes DD IEC PAS 61754-19:2001 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee GEL/86/2, Fibre optic interconnecting devices and pas

4、sive components, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For

5、 a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement these international or European publications referred to in this document may be found in the BSI Standards

6、Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for th

7、eir correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK inter

8、ests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright date displayed in this document indicates when the

9、document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 61754-19 NORME EUROPENNE EUROPISCHE NORM January 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektr

10、otechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61754-19:2002 E ICS 33.180.20 English version Fibre optic connector interfaces Part 19: Type SG co

11、nnector family (IEC 61754-19:2001) Interfaces de connecteurs pour fibres optiques Partie 19: Famille de connecteurs de type SG (CEI 61754-19:2001) Steckgesichter von Lichtwellenleiter- Steckverbindern Teil 19: Steckverbinderfamilie der Bauart SG (IEC 61754-19:2001) This European Standard was approve

12、d by CENELEC on 2001-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa

13、l standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language a

14、nd notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,

15、 Spain, Sweden, Switzerland and United Kingdom.EN 61754-19:2002 - 2 - Foreword The text of document 86B/1575/FDIS, future edition 1 of IEC 61754-19, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel v

16、ote and was approved by CENELEC as EN 61754-9 on 2001-12-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-09-01 latest date by which the national standards conflicting

17、 with the EN have to be withdrawn (dow) 2004-12-01 The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is claimed that compliance with this International Standard/European Standard may involve the use of a patent concerning SG connectors. The IEC and CE

18、NELEC take no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, th

19、e statement of the holder of this patent right is registered with the IEC. Information may be obtained from: Minnesota Mining and Manufacturing Company (3M) Building A 130-2N-34 6801 River Place Boulevard Austin TX 78726-9000 Attention is drawn to the possibility that some of the elements of this In

20、ternational Standard/European Standard may be the subject of patent rights other than those identified above. IEC and CENELEC shall not be held responsible for identifying any or all such patent rights. _ Endorsement notice The text of the International Standard IEC 61754-19:2001 was approved by CEN

21、ELEC as a European Standard without any modification. _ Page2 EN6175419:2002 BSI20February200261754-19 IEC:2001 1 FIBRE OPTIC CONNECTOR INTERFACES Part 19: Type SG connector family 1 Scope This part of IEC 61754 defines the standard interface dimensions for the type SG family of connectors. 2 Descri

22、ption The parent connector for the type SG connector family is a single position plug of plug/socket connector set configuration. The plug is characterized by duplex cantilevered optical fibres located within the plug interior. Plug optical fibres flex to mate with socket optical fibre ends. Mating

23、socket optical fibres are positioned and aligned by integral V-grooves. Socket V- grooves capture, guide, and align the plug optical fibres during connector set engagement. The spring-release latch limits plug penetration into the socket; it is also a single position key preventing inverted assembly

24、. Contaminant entry is restricted by an integral plug cover and socket door. Each is normally closed when de-mated, but self-actuate to open position for single-action connector set engagement. 3 Interfaces The following figures and tables define the standard interfaces for the type SG connector fam

25、ily. The standard interfaces contained in this standard are listed in the following:61754-19-1: duplex plug connector interface 8 contact angle61754-19-2: duplex socket connector interface 8 contact angle The following connectors are intermateable: 61754-19-1 mates with 61754-19-2. Page3 EN6175419:2

26、002 BSI20February200261754-19 IEC:2001 2 a Plug cover shown in open position (openings expose fibre ends). Transverse cover motion is self-actuated by entry/exit from socket. b Optical fibre (see table 1a, table footnote b ). Figure 1a Duplex plug connector interface Mechanical reference plane N M P

27、 H J L C a B A R AC S AB W V BA BB Y b A D Mechanical reference plane U BC AA T E G F K BD BF AD BG Optical reference plane BE A IEC 2037/01 Page4 EN6175419:2002 BSI20February200261754-19 IEC:2001 3 Table 1a Dimensions of the duplex plug connector interface Dimensions Reference Minimum Maximum Notes

28、 A 21 mm B 11,85 mm 12 mm C 18,5 mm D 1 mm 2 mm Plug body radius, four places E 1,6 mm 3,4 mm F 1,17 mm 1,27 mm Two places G 19 mm 21 mm H 2,2 mm 4,7 mm J 4,5 mm 4,7 mm K 1 mm 2 mm Radius, two places L 9 mm 10,5 mm M 10,6 mm N 6 mm 12,7 mm Two places P 2,1 mm 2,5 mm Latch only R 0,6 mm 0,8 mm S 2,7

29、mm 2,9 mm T 5,3 mm Two places a U 7,85 mm 8 mm V 1,5 mm 1,7 mm Two places W 7,3 mm 7,5 mm Y 1,7 mm 1,9 mm Two places AA 16 18 AB 23 27 AC 28 32 AD 43 See footnote a BA 4,1 mm 4,9 mm See footnote b BB 3,4 mm 4,2 mm See footnote b BC 18 mm 18,3 mm Two places BD 22,2 mm 22,5 mm Two places BE 0,5 mm 2 m

30、m BF 10,5 mm See footnote a BG 6 mm See footnote a NOTE 1 Latch travel is operated so as to permit plug/socket disengagement without interference. NOTE 2 Latching is made so as to prevent plug overtravel engagement with socket. NOTE 3 Non-mandatory internal plug structures may also be present to imp

31、rove performance (for example, to guide fibres, limit minimum fibre bend radii, or increase fibre contact force). To ensure intermateability, they do not extend more than 10,5 mm maximum from the mechanical reference plane toward the plug end. NOTE 4 Minimum optical fibre strip length is 7,4 mm. Unc

32、oated optical fibres do not extend into flex region of mated interfaces. aDefines internal plug cavity, to provide minimum flexure clearance for each optical fibre in assembly with socket. bDimension BA and BB tolerances denote optical fibre endfaces only. Page5 EN6175419:2002 BSI20February200261754

33、-19 IEC:2001 4 Figure 1b Duplex plug connector interface Expanded view from direction A Table 1b Expanded view dimensions of the duplex plug connector interface Dimensions Reference Minimum Maximum Notes AH 7,5 8,5 AJ 30 45 Conic chamfer angle CA (0,125 mm) REF (optical fibre) CB See footnote b 0,09

34、4 mm Fibre endface CC See footnote a NOTE 1 Axis -XX- is the fibre axis parallel to datum A of figure 1a. NOTE 2 Axis -YY- is the fibre axis perpendicular to Axis -XX-. NOTE 3 Y ( - ) faces datum A of figure 1a. NOTE 4 The fibre endface is perpendicular to axis -YY- within 0,5 . NOTE 5 Dimensional r

35、equirements apply to the finished fibre, after termination procedures have been completed. aNo projecting burr permissible. b CB diameter is equal to or greater than the nominal optical fibre core diameter.AJAHCB CC Optical reference plane X ( + ) Y Y ( - ) X CA IEC 2038/01 Page6 EN6175419:2002 BSI2

36、0February200261754-19 IEC:2001 5 Figure 2a Duplex socket connector interface -YY- -YY- -ZZ- Section -XX- AG BA Y BW Optical fibre BX Mechanical reference plane Side section through V-groove Door shown rotated to open position Optical fibre BU G -XX- -XX- BV Optical reference plane BH T U AE F AF BT

37、A BM W BN B BR BS BP Section -YY- Door shown in closed position Section -ZZ- Door rotated from view J E -ZZ- BK AC BJ P BL AB Door shown in closed position B IEC 2039/01 Page7 EN6175419:2002 BSI20February200261754-19 IEC:2001 6 Table 2a Duplex socket connector interface Dimensions Reference Minimum

38、Maximum Notes B 12,02 mm 12,2 mm E 3,4 mm F 0,97 mm 1,07 mm G 21 mm J 4,9 mm 12,2 mm P 2,7 mm 2,9 mm T 4,9 mm 5,1 mm U 8 mm 8,2 mm W 7,6 mm 7,7 mm Y 1,2 mm 1,6 mm Rib width AB 23 27 AC 28 32 AE 30 70 AF 47 49 AG 88 92 BA 4,4 mm 4,6 mm BH (10,6 mm) REF BJ 5,7 mm 6 mm BK 3,6 mm 3,8 mm BL 0,7 mm 1 mm B

39、M 1,3 mm 1,5 mm BN 1,2 mm 1,4 mm BP 1 mm 2,5 mm BR 11,9 mm 12 mm BS 2 mm 2,2 mm BT 11,66 mm 11,81 mm BU 3,6 mm Socket fibre alignment groove length BV 10,95 mm 11,15 mm BW 0,04 mm Maximum radius BX 0,9 mm 1,6 mm V-groove width Page8 EN6175419:2002 BSI20February200261754-19 IEC:2001 7 Figure 2b Duple

40、x socket connector interface Expanded view from direction A Table 2b Expanded view dimensions of the duplex socket connector interface Dimensions Reference Minimum Maximum Notes AH 7,5 8,5 CA (0,125 mm) REF (optical fibre) NOTE 1 Axis -YY- is the fibre axis parallel to datum B of figure 2a. NOTE 2 A

41、xis -XX- is the fibre axis perpendicular to axis -YY-. NOTE 3 X ( ) faces datum B of figure 2a. NOTE 4 The fibre endface is perpendicular to axis -YY- within 0,5 . NOTE 5 Dimensional requirements apply to the finished fibre, after termination procedures have been completed. _ X ( - ) Y Y X ( + ) Opt

42、ical reference plane AH CA IEC 2040/01 Page9 EN6175419:2002 BSI20February2002BS EN 61754-19:2002 IEC 61754-19:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on s

43、tandards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the qual

44、ity of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0

45、)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44

46、 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless othe

47、rwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products

48、and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits

49、contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. C