1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive components Fibre optic connector interfacesPart 26: Type SF connector familyBS EN 61754-26:2012National forewordThis British Standa
2、rd is the UK implementation of EN 61754-26:2012. It isidentical to IEC 61754-26:2012.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represent
3、ed on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 67006
4、 0ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 October 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN
5、61754-26:2012EUROPEAN STANDARD EN 61754-26 NORME EUROPENNE EUROPISCHE NORM September 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Bru
6、ssels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61754-26:2012 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 26: Type SF connector fa
7、mily (IEC 61754-26:2012) Dispositifs dinterconnexion et composants passifs fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 26: Famille de connecteurs de type SF (CEI 61754-26:2012) Lichtwellenleiter -Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenl
8、eiter-Steckverbindern - Teil 26: Steckverbinderfamilie der Bauart SF (IEC 61754-26:2012) This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the st
9、atus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, Fren
10、ch, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria,
11、 Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, S
12、weden, Switzerland, Turkey and the United Kingdom. BS EN 61754-26:2012EN 61754-26:2012 - 2 - Foreword The text of document 86B/3433/FDIS, future edition 1 of IEC 61754-26, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the
13、 IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-26:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-05-28 latest date by which the national stand
14、ards conflicting with the document have to be withdrawn (dow) 2015-08-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement n
15、otice The text of the International Standard IEC 61754-26:2012 was approved by CENELEC as a European Standard without any modification. BS EN 61754-26:2012 2 61754-26 IEC:2012 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Description . 6 3 Interfaces . 6 Figure 1 SF plug connector interface 7 Figure 2 Exp
16、anded view of b (plug endface geometry) 8 Figure 3 Positions of fibres . 9 Figure 4 SF socket connector interface . 10 Figure 5 Expanded view of e (micro holes array geometry) . 11 Figure 6 Positions of micro holes 12 Figure 7 SF adaptor interface . 13 Figure 8 SF adaptor clip interface . 14 Table 1
17、 Dimensions of the SF plug connector interface . 7 Table 2 Dimensions of the SF plug endface 8 Table 3 Positions of fibres for SF plug 9 Table 4 Dimensions of the SF socket connector interface . 10 Table 5 Dimensions of the micro holes array 11 Table 6 Positions of micro holes for SF socket 12 Table
18、 7 Dimensions of the SF adaptor interface 13 Table 8 Dimensions of the SF adaptor clip interface . 14 BS EN 61754-26:201261754-26 IEC:2012 5 INTRODUCTION The International Organization for International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance
19、with this document may involve the use of a patent concerning IEC 61754-26. IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory
20、 terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: Nippon Telegraph and Telephone Corporation, 9-11, Midori-cho, 3-Chome Musashino-Shi, Tokyo 180-8585, Japan. Attentio
21、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. BS EN 61754-26:2012 6 61754-26 IEC:2012 FIBRE OPTIC INTERCONNECTING DEVICES
22、 AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 26: Type SF connector family 1 Scope This part of IEC 61754 defines the standard interface dimensions for the type SF optical board connector that uses a normal glass fibre and the physical contact technique to connect flexible optical bo
23、ards and ribbon fibres. 2 Description The parent connector for the type SF connector family is a multiway connector with a plug/socket connector set configuration, The plug is characterized by multiway cantilevered optical fibres located inside the plug, The plug optical fibres buckled to mate with
24、the socket optical fibre ends, Mating socket optical fibres are positioned and aligned by using multiway micro holes, Socket micro holes capture, guide, and align the plug optical fibres during connector set engagement, The plug fibres and socket fibres are butted together to realize physical contac
25、t connection by employing the buckled force of the plug fibres without using a ferrule or a spring, 3 Interfaces This standard contains the following standard interfaces, IEC 61754-26-1: SF plug connector flat interface for 2 to 16 fibres IEC 61754-26-2: SF socket connector flat interface for 2 to 1
26、6 fibres The following connectors are intermateable: IEC 61754-26-1 mates with IEC 61754-26-2 Figure 1 is an example of a SF plug connector interface. Table 1 gives dimensions of the SF plug connector interface. BS EN 61754-26:201261754-26 IEC:2012 7 Marking (both sides) IEC 1356/12 Figure 1 SF plug
27、 connector interface Table 1 Dimensions of the SF plug connector interface Item Dimensions mm Remarks Minimum Maximum PA 7,6 PB 8,6 8,7 PC1 0,995 1,02 PC2 0,795 0,82 PD 2,6 PE 8,5 8,7 PF 6,75 6,8 PG 5,8 5,85 PH 5,6 PJ 2 2,05 PK 9,4 9,6 PL 0,04 0,06 See Figure 2 PM 0,4 0,5 PN 1 1,1 PP 0,4 PQ 0,2 PR 0
28、,4 PS 6,8 NOTE Put markings on upper and lower faces of PC1 side. Those shapes and sizes are optional. BS EN 61754-26:2012 8 61754-26 IEC:2012 Figure 2 is an expanded view of b for SF plug endface. Table 2 gives dimensions of the SF plug endface. Detail c Detail b IEC 1357/12 Figure 2 Expanded view
29、of b (plug endface geometry) Table 2 Dimensions of the SF plug endface Item Dimensions Notes Minimum Maximum FA ( 0,125 mm) NOTE FB 0,08 mm a FC 25 65 Chamfer angle FD 0,75 mm 0,9 mm Coating removal length NOTE The SF plug is possible to use for A1a multi-mode fibre (IEC 60793-2-10) and B single-mod
30、e fibre (IEC 60793-2-50). aThe minimum diameter of FB shall be larger than the core of the optical fibre. BS EN 61754-26:201261754-26 IEC:2012 9 Figure 3 is an example of the positions of fibres. Table 3 gives dimensions of the positions of fibres for SF plug. The symmetry of cables relative to the
31、X axis shall be within 0,02 mm. IEC 1358/12 NOTE 1 The datum X is the X axis of the dimension PJ at the centre. NOTE 2 The datum Y is the Y axis of the dimension PF at the centre. Figure 3 Positions of fibres Table 3 Positions of fibres for SF plug Item Dimensions mm Notes Minimum Maximum CA 0,115 0
32、,135 1 CB 0,365 0,385 1 CC 0,615 0,635 1 CD 0,865 0,885 1 CE 1,115 1,135 1 CF 1,365 1,385 1 CG 1,615 1,635 1 CH 1,865 1,885 1 NOTE 1 Each dimension is specified at the end of a fibre. BS EN 61754-26:2012 10 61754-26 IEC:2012 Figure 4 is an example of a SF socket connector interface. Table 4 gives di
33、mensions of the SF socket connector interface. Marking (both sides) IEC 1359/12 Figure 4 SF socket connector interface Table 4 Dimensions of the SF socket connector interface Item Dimensions mm Notes Minimum Maximum SA 7,6 SB 8,6 8,7 SC1 0,995 1,02 SC2 0,795 0,82 SD 2,6 SE 8,5 8,7 SF 6,75 6,8 SG 5,7
34、5 5,8 SH 5,6 SJ 1,95 2 SL 0 0,01 See Figure 5 SP 0,4 SQ 0,2 SR 0,4 SS 6,8 NOTE Put on markings on upper and lower faces of SC1 side. Those shape and size are optional. Figure 5 is an example of expanded view of e (micro holes array geometry). Table 5 gives dimensions of the micro holes array. BS EN
35、61754-26:201261754-26 IEC:2012 11 SL Detail e Detail f Detail g IEC 1360/12 Figure 5 Expanded view of e (micro holes array geometry) Table 5 Dimensions of the micro holes array Item Dimensions mm Notes Minimum Maximum MA 1,5 1,6 MB 0,7 0,75 MC 0,45 0,5 MD 0,2 0,25 ME 0,75 MF 0,75 MG 4,25 4,4 MH 0,26
36、5 0,28 MI 4,5 MJ 0,5 MK 0,2 0,25 ML 0,1255 0,1265 NOTE MM 0,2 NOTE Triangular cross-section is available for micro holes. Dimension ML is specified as the inner diameter of an inscribed circle of the triangular cross-section. BS EN 61754-26:2012 12 61754-26 IEC:2012 Figure 6 is an example of the pos
37、itions of micro holes. Table 6 gives dimensions of the positions of micro holes for SF socket. The symmetry of cables relative to the X axis shall be within 0,02 mm. The symmetry may be agreed between users and supplier when the symmetry includes the guide area of the fibre. The guide area of a fibr
38、e shall be more than 0,045 mm from the centre of a micro hole. IEC 1361/12 NOTE 1 The datum X is the X axis of the dimension JJ at the centre. NOTE 2 The datum Y is the Y axis of the dimension JF at the centre. Figure 6 Positions of micro holes Table 6 Positions of micro holes for SF socket Item Dim
39、ension mm Notes Minimum Maximum CA 0,115 0,135 NOTE CB 0,365 0,385 NOTE CC 0,615 0,635 NOTE CD 0,865 0,885 NOTE CE 1,115 1,135 NOTE CF 1,365 1,385 NOTE CG 1,615 1,635 NOTE CH 1,865 1,885 NOTE NOTE 1 Each dimension is specified at the end of a fibre. Figure 7 is an example of SF adaptor interface. Ta
40、ble 7 gives dimensions of the SF adaptor interface. BS EN 61754-26:201261754-26 IEC:2012 13 Marking IEC 1362/12 Figure 7 SF adaptor interface Table 7 Dimensions of the SF adaptor interface Item Dimensions mm Notes Minimum Maximum AA 6,8 6,82 AB 7,6 AC 16,3 16,5 AD 7,8 AE 1,3 AF1 0,97 0,995 AF2 0,77
41、0,795 AG 9 9,1 AH 1,9 2 AJ 9,1 9,2 AK 0,2 AL 0,3 AM 0,2 NOTE Put markings on upper face of AF1 side. Those shapes and sizes are optional. BS EN 61754-26:2012 14 61754-26 IEC:2012 Figure 8 is an example of SF adaptor clip interface. Table 8 gives dimensions of the SF adaptor clip interface. IEC 1363/
42、12 Figure 8 SF adaptor clip interface Table 8 Dimensions of the SF adaptor clip interface Item Dimensions mm Notes Minimum Maximum CA1 16,5 16,7 a CA2 17,2 17,4 b CB 1,4 1,6 CC 5,7 CD 7,5 CE 8,6 CF 9,1 CG 9,4 9,5 CH 1,6 1,7 CJ 7,2 aLength in free condition. bCompression force for clamping condition
43、shall be 9,6 N to 16 N when dimension CA2 is deformed between 17,2 mm and 17,4 mm. _ BS EN 61754-26:2012This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, informa
44、tion and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chi
45、swick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quali
46、ty of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Custom
47、er Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Bu
48、ying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on n
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1