1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationIndustrial communication networks ProfilesPart 5-10: Installation of fieldbuses Installation profiles for CPF 10BS EN 61784-5-10:2012Copyright European Committee for Electrotechn
2、ical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 61784-5-10:2012. It is identical to IEC 61784-5-10:2010. It supersedes BS EN 61784-5
3、-10:2008 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, includ-ing fieldbus.A list of organizations represented on this committee can be obtained on request to its secretary.This publi
4、cation does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012 ISBN 978 0 580 72459 6 ICS 25.040.40; 35.100.40 Compliance with a British Standard cannot co
5、nfer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2012.Amendments issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-10:2012Copyright European Committee for Electrotechnical Stand
6、ardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 61784-5-10 NORME EUROPENNE EUROPISCHE NORM April 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalis
7、ation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-10:2012 E ICS 25.040.40; 35.100.40 Superse
8、des EN 61784-5-10:2008English version Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 (IEC 61784-5-10:2010) Rseaux de communication industriels - Profils - Partie 5-10: Installation des bus de terrain - Profils dinstallation pou
9、r CPF 10 (CEI 61784-5-10:2010) Industrielle Kommunikationsnetze - Profile - Teil 5-10: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 10 (IEC 61784-5-10:2010) This European Standard was approved by CENELEC on 2011-10-19. CENELEC members are bound to comply with the CEN
10、/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Cen
11、tre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same stat
12、us as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, N
13、orway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-10:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted with
14、out license from IHS-,-,-EN 61784-5-10:2012 - 2 - Foreword The text of document 65C/602/FDIS, future edition 2 of IEC 61784-5-10, prepared by SC 65C, “Industrial networks“, of IEC/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and appro
15、ved by CENELEC as EN 61784-5-10:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-10-20 latest date by which the national standards conflicting with the document
16、 have to be withdrawn (dow) 2014-10-19 This document supersedes EN 61784-5-10:2008. This standard is to be used in conjunction with IEC 61918, second edition (2010-07), together with the European Common Modification published with EN 61918:2008. Attention is drawn to the possibility that some of the
17、 elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-10:2010 was approved by CENELEC as a European Standard without any mod
18、ification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC/TR 61158-1 NOTE Harmonized as CLC/TR 61158-1. BS EN 61784-5-10:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot
19、for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 61784-5-10:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of th
20、is document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applie
21、s. Publication Year Title EN/HD Year IEC 61918 2010 Industrial communication networks - Installation of communication networks in industrial premises - - BS EN 61784-5-10:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo
22、reproduction or networking permitted without license from IHS-,-,- 2 61784-5-10 IEC:2010(E) CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions and abbreviated terms .6 4 CPF 10: Overview of installation profiles 6 5 Installation profile conventions .6 6 Conformance to i
23、nstallation profiles7 Annex A (normative) CP 10/1 (Vnet/IP) specific installation profile .8 Bibliography19 Figure 1 Standards relationships5 Table A.1 Network characteristics for balanced cabling based on Ethernet 10 Table A.2 Network characteristics for optical fibre cabling10 Table A.3 Informatio
24、n relevant to copper cable: fixed cables11 Table A.4 Information relevant to copper cable: cords12 Table A.5 Information relevant to optical fibre cables .12 Table A.6 Connectors for balanced cabling CPs based on Ethernet .13 Table A.7 Optical fibre connecting hardware 14 BS EN 61784-5-10:2012Copyri
25、ght European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-10 IEC:2010(E) 5 INTRODUCTION This International Standard is one of a series produced to facilitate the use
26、 of communication networks in industrial control systems. IEC 61918:2010 provides the common requirements for the installation of communication networks in industrial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specif
27、ic communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles
28、 specified in this standard, see IEC/TR 61158-1. Each CP installation profile is specified in a separate annex of this standard. Each annex is structured exactly as the reference standard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined
29、in IEC 61918 (planner, installer, verification personnel, validation personnel, maintenance personnel, administration personnel). By reading the installation profile in conjunction with IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which
30、are modified or replaced. The conventions used to draft this standard are defined in Clause 5. The provision of the installation profiles in one standard for each CPF (for example IEC 61784-5-10 for CPF 10), allows readers to work with standards of a convenient size. INDUSTRIAL PREMISESISO/IEC 24702
31、OFFICE PREMISES ISO/IEC 11801ISO/IEC14763-2IEC 61918(Common requirements)IEC 61158 seriesandIEC 61784-1, -2GENERIC CABLINGBETWEENAUTOMATIONISLANDSAPPLICATION-SPECIFICCABLINGWITHINAUTOMATIONISLANDSBETWEENAUTOMATIONISLANDSDESIGNPLANNING AND INSTALLATIONInstallation ProfilesIEC 61784-5 series(Selection
32、 +Add/Repl/Mod)Common structureData centre AnnexHomeAnnexOfficesAnnexIndustrialAnnexISO/IEC 15018ISO/IEC 24764HOMES DATA CENTRESFigure 1 Standards relationships BS EN 61784-5-10:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for Re
33、saleNo reproduction or networking permitted without license from IHS-,-,- 6 61784-5-10 IEC:2010(E) INDUSTRIAL COMMUNICATION NETWORKS PROFILES Part 5-10: Installation of fieldbuses Installation profiles for CPF 10 1 Scope This part of IEC 61784 specifies the installation profile for CPF 10 (Vnet/IP)1
34、. The installation profile is specified in the annex. This annex is read in conjunction with IEC 61918:2010. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,
35、 the latest edition of the referenced document (including any amendments) applies. IEC 61918:2010, Industrial communication networks Installation of communication networks in industrial premises The normative references of IEC 61918:2010, Clause 2, apply. 3 Terms, definitions and abbreviated terms F
36、or the purposes of this document, the terms, definitions and abbreviated terms of IEC 61918:2010, Clause 3, apply. For profile specific terms, definitions and abbreviated terms see Clause A.3. 4 CPF 10: Overview of installation profiles CPF 10 consists of one communication profile as specified in IE
37、C 61784-2. The installation requirements for CP 10/1 (Vnet/IP) are specified in Annex A. 5 Installation profile conventions The numbering of the clauses and subclauses in the annexes of this standard corresponds to the numbering of IEC 61918 main clauses and subclauses. The annex clauses and subclau
38、ses of this standard supplement, modify, or replace the respective clauses and subclauses in IEC 61918. _ 1Vnet/IP is a trade name of Yokogawa Electric Corporation. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of
39、the trademark holder or any of its products. Compliance to this standard does not require use of the trade name Vnet/IP. Use of the trade name Vnet/IP requires permission of Yokogawa Electric Corporation. BS EN 61784-5-10:2012Copyright European Committee for Electrotechnical Standardization Provided
40、 by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-10 IEC:2010(E) 7 Where there is no corresponding subclause of IEC 61918 in the normative annexes in this standard, the subclause of IEC 61918 applies without modification. The
41、 annex heading letter represents the installation profile assigned in Clause 4 . The annex (sub)clause numbering following the annex letter shall represent the corresponding (sub)clause numbering of IEC 61918 EXAMPLE “Annex B.4.4” in IEC 61784-5-3 means that CP 3/2 specifies the Subclause 4.4 of IEC
42、 61918. All main clauses of IEC 61918 are cited and apply in full unless otherwise stated in each normative installation profile annex. If all subclauses of a (sub)clause are omitted, then the corresponding IEC 61918 (sub)clause applies. If in a (sub)clause it is written “Not applicable”, then the c
43、orresponding IEC 61918 (sub)clause does not apply. If in a (sub)clause it is written “Addition”, then the corresponding IEC 61918 (sub)clause applies with the additions written in the profile. If in a (sub)clause it is written “Replacement”, then the text provided in the profile replaces the text of
44、 the corresponding IEC 61918 (sub)clause. NOTE A replacement can also comprise additions. If in a (sub)clause it is written “Modification”, then the corresponding IEC 61918 (sub)clause applies with the modifications written in the profile. If all (sub)clauses of a (sub)clause are omitted but in this
45、 (sub)clause it is written “(sub)clause x has addition:” (or “replacement”) or is “(Sub)clause x is not applicable.”, then (sub)clause x becomes valid as declared and all the other corresponding IEC 61918 (sub)clauses apply. 6 Conformance to installation profiles Each installation profile within thi
46、s standard includes part of IEC 61918:2010. It may also include defined additional specifications. A statement of compliance to an installation profile of this standard shall be stated2as either Compliance to IEC 61784-5-10:20103for CP 10/1 or Compliance to IEC 61784-5-10 (Ed.2.0) for CP 10/1 where
47、the name within the angle brackets is optional and the angle brackets are not to be included. NOTE The name may be the name of the profile, for example Vnet/IP. If the name is a trade name then the permission of the trade name holder shall be required. Product standards shall not include any conform
48、ity assessment aspects (including quality management provisions), neither normative nor informative, other than provisions for product testing (evaluation and examination). _ 2In accordance with ISO/IEC Directives 3The date should not be used when the edition number is used. BS EN 61784-5-10:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 61784-5-10 IEC:2010(E) Annex A (n
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1