BS EN 61784-5-11-2013 Industrial communication networks Profiles Installation of fieldbuses Installation profiles for CPF 11《工业通信网络 协议集 现场总线的安装 CPF 11的安装协议集》.pdf

1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-11: Installation of fieldbuses Installation profiles for CPF 11BS EN 61784-5-11:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking

2、 permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 61784-5-11:2013. It isidentical to IEC 61784-5-11:2013. It supersedes BS EN 61784-5-11:2012which is withdrawn.The UK participation in its preparation was entrusted to Technical Com-mittee AM

3、T/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its co

4、rrect application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 84198 9ICS 25.040.40; 35.100.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Polic

5、y and Strategy Committee on 31 January 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-11:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted wi

6、thout license from IHS-,-,-EUROPEAN STANDARD EN 61784-5-11 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Ave

7、nue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-11:2013 E ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-11:2012 English version Industrial communication networks - Profiles - Part 5-1

8、1: Installation of fieldbuses - Installation profiles for CPF 11 (IEC 61784-5-11:2013) Rseaux de communication industriels - Profils - Partie 5-11: Installation des bus de terrain - Profils dinstallation pour CPF 11 (CEI 61784-5-11:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-11: Feldbu

9、sinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 11 (IEC 61784-5-11:2013) This European Standard was approved by CENELEC on 2013-10-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar

10、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (Engli

11、sh, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of

12、Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

13、Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-11:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 61784-5-11:2013 - 2 - Foreword The

14、text of document 65C/738/FDIS, future edition 3 of IEC 61784-5-11, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-11:2013. The following dates are fixe

15、d: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-22 This document supersedes EN

16、 61784-5-11:2012. EN 61784-5-11:2013 includes the following significant technical changes with respect to EN 61784-5-11:2012: addition of a new Annex C (normative). This standard is to be used in conjunction with EN 61918:2013. Attention is drawn to the possibility that some of the elements of this

17、document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-11:2013 was approved by CENELEC as a European Standard without any modification. BS EN 6

18、1784-5-11:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 61784-5-11:2013 Annex ZA (normative) Normative references to international publications with the

19、ir corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (inc

20、luding any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN 61918:2013: IEC 61918 2

21、013 Industrial communication networks - Installation of communication networks in industrial premises EN 61918 2013 BS EN 61784-5-11:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without li

22、cense from IHS-,-,- 2 61784-5-11 IEC:2013 CONTENTS INTRODUCTION . 10 1 Scope . 11 2 Normative references . 11 3 Terms, definitions and abbreviated terms . 11 4 CPF 11: Overview of installation profiles 11 5 Installation profile conventions . 11 6 Conformance to installation profiles 12 Annex A (norm

23、ative) CP 11/1 (TCnet-star) specific installation profile 14 A.1 Installation profile scope . 14 A.2 Normative references . 14 A.3 Installation profile terms, definitions, and abbreviated terms . 14 A.4 Installation planning . 14 A.4.1 General . 14 A.4.2 Planning requirements . 14 A.4.2.1 Safety 14

24、A.4.2.2 Security . 14 A.4.2.3 Environmental considerations and EMC . 14 A.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 14 A.4.3 Network capabilities 14 A.4.3.1 Network topology . 14 A.4.3.2 Network characteristics . 15 A.4.4 Selection and use of cabling components

25、 17 A.4.4.1 Cable selection . 17 A.4.4.2 Connecting hardware selection . 18 A.4.4.3 Connections within a channel/permanent link 20 A.4.4.4 Terminators 20 A.4.4.5 Device location and connection . 20 A.4.4.6 Coding and labelling . 20 A.4.4.7 Earthing and bonding of equipment and devices and shielded c

26、abling 20 A.4.4.8 Storage and transportation of cables . 20 A.4.4.9 Routing of cables 20 A.4.4.10 Separation of circuit 20 A.4.4.11 Mechanical protection of cabling components . 21 A.4.4.12 Installation in special areas . 21 A.4.5 Cabling planning documentation 21 A.4.6 Verification of cabling plann

27、ing specification . 21 A.5 Installation implementation . 21 A.5.1 General requirements 21 A.5.2 Cable installation . 21 A.5.2.1 General requirements for all cabling types . 21 A.5.2.2 Installation and routing 22 A.5.2.3 Specific requirements for CPs . 22 BS EN 61784-5-11:2013Copyright British Standa

28、rds Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-11 IEC:2013 3 A.5.2.4 Specific requirements for wireless installation 22 A.5.2.5 Specific requirements for generic cabling in accordan

29、ce with ISO/IEC 24702 22 A.5.3 Connector installation 22 A.5.4 Terminator installation . 22 A.5.5 Device installation . 22 A.5.6 Coding and labelling 22 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 22 A.5.8 As-implemented cabling documentation . 22 A.6 Installation verifi

30、cation and installation acceptance test 22 A.6.1 General . 22 A.6.2 Installation verification . 22 A.6.2.1 General . 22 A.6.2.2 Verification according to cabling planning documentation 22 A.6.2.3 Verification of earthing and bonding 22 A.6.2.4 Verification of shield earthing 22 A.6.2.5 Verification

31、of cabling system 22 A.6.2.6 Cable selection verification . 22 A.6.2.7 Connector verification . 23 A.6.2.8 Connection verification 23 A.6.2.9 Terminators verification . 23 A.6.2.10 Coding and labelling verification . 23 A.6.2.11 Verification report . 23 A.6.3 Installation acceptance test . 23 A.6.3.

32、1 General . 23 A.6.3.2 Acceptance test of Ethernet-based cabling 23 A.6.3.3 Acceptance test of non-Ethernet-based cabling . 23 A.6.3.4 Specific requirements for wireless installation 23 A.6.3.5 Acceptance test report . 23 A.7 Installation administration . 23 A.8 Installation maintenance and installa

33、tion troubleshooting . 23 Annex B (normative) CP 11/2 (TCnet-loop 100) specific installation profile 24 B.1 Installation profile scope . 24 B.2 Normative references . 24 B.3 Installation profile terms, definitions, and abbreviated terms . 24 B.4 Installation planning . 24 B.4.1 General . 24 B.4.2 Pl

34、anning requirements . 24 B.4.2.1 Safety 24 B.4.2.2 Security . 24 B.4.2.3 Environmental considerations and EMC . 24 B.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 24 B.4.3 Network capabilities 24 B.4.3.1 Network topology . 24 B.4.3.2 Network characteristics . 24 B.

35、4.4 Selection and use of cabling components 27 B.4.4.1 Cable selection . 27 BS EN 61784-5-11:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 4 61784-5-11 IEC:201

36、3 B.4.4.2 Connecting hardware selection . 28 B.4.4.3 Connections within a channel/permanent link 30 B.4.4.4 Terminators 30 B.4.4.5 Device location and connection . 30 B.4.4.6 Coding and labelling . 30 B.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 30 B.4.4.8 Storage and t

37、ransportation of cables . 30 B.4.4.9 Routing of cables 30 B.4.4.10 Separation of circuit 30 B.4.4.11 Mechanical protection of cabling components . 31 B.4.4.12 Installation in special areas . 31 B.4.5 Cabling planning documentation 31 B.4.6 Verification of cabling planning specification . 31 B.5 Inst

38、allation implementation . 31 B.5.1 General requirements 31 B.5.2 Cable installation . 31 B.5.2.1 General requirements for all cabling types . 31 B.5.2.2 Installation and routing 32 B.5.2.3 Specific requirements for CPs . 32 B.5.2.4 Specific requirements for wireless installation 32 B.5.2.5 Specific

39、requirements for generic cabling in accordance with ISO/IEC 24702 32 B.5.3 Connector installation 32 B.5.4 Terminator installation . 32 B.5.5 Device installation . 32 B.5.6 Coding and labelling 32 B.5.7 Earthing and bonding of equipment and devices and shield cabling . 32 B.5.8 As-implemented cablin

40、g documentation . 33 B.6 Installation verification and installation acceptance test 33 B.6.1 General . 33 B.6.2 Installation verification . 33 B.6.2.1 General . 33 B.6.2.2 Verification according to cabling planning documentation 33 B.6.2.3 Verification of earthing and bonding 33 B.6.2.4 Verification

41、 of shield earthing 33 B.6.2.5 Verification of cabling system 33 B.6.2.6 Cable selection verification . 33 B.6.2.7 Connector verification . 33 B.6.2.8 Connection verification 33 B.6.2.9 Terminators verification . 33 B.6.2.10 Coding and labelling verification . 33 B.6.2.11 Verification report . 33 B.

42、6.3 Installation acceptance test . 33 B.6.3.1 General . 33 B.6.3.2 Acceptance test of Ethernet-based cabling 33 B.6.3.3 Acceptance test of non-Ethernet-based cabling . 33 B.6.3.4 Specific requirements for wireless installation 33 B.6.3.5 Acceptance test report . 34 BS EN 61784-5-11:2013Copyright Bri

43、tish Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-11 IEC:2013 5 B.7 Installation administration . 34 B.8 Installation maintenance and installation troubleshooting . 34 Annex

44、 C (normative) CP 11/3 (TCnet-loop 1G) specific installation profile . 35 C.1 Installation profile scope . 35 C.2 Normative references . 35 C.3 Installation profile terms, definitions, and abbreviated terms . 35 C.4 Installation planning . 35 C.4.1 General . 35 C.4.2 Planning requirements . 35 C.4.2

45、.1 Safety 35 C.4.2.2 Security . 35 C.4.2.3 Environmental considerations and EMC . 35 C.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 35 C.4.3 Network capabilities 35 C.4.3.1 Network topology . 35 C.4.3.2 Network characteristics . 35 C.4.4 Selection and use of cabli

46、ng components 37 C.4.4.1 Cable selection . 37 C.4.4.2 Connecting hardware selection . 37 C.4.4.3 Connections within a channel/permanent link 38 C.4.4.4 Terminators 38 C.4.4.5 Device location and connection . 39 C.4.4.6 Coding and labelling . 39 C.4.4.7 Earthing and bonding of equipment and devices a

47、nd shielded cabling 39 C.4.4.8 Storage and transportation of cables . 39 C.4.4.9 Routing of cables 39 C.4.4.10 Separation of circuit 39 C.4.4.11 Mechanical protection of cabling components . 39 C.4.4.12 Installation in special areas . 39 C.4.5 Cabling planning documentation 39 C.4.6 Verification of

48、cabling planning specification . 39 C.5 Installation implementation . 40 C.5.1 General requirements 40 C.5.2 Cable installation . 40 C.5.2.1 General requirements for all cabling types . 40 C.5.2.2 Installation and routing 40 C.5.2.3 Specific requirements for CPs . 40 C.5.2.4 Specific requirements fo

49、r wireless installation 40 C.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 40 C.5.3 Connector installation 40 C.5.4 Terminator installation . 40 C.5.5 Device installation . 40 C.5.6 Coding and labelling 40 C.5.7 Earthing and bonding of equipment and devices and shield cablin