1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-19: Installation of fieldbuses Installation profiles for CPF 19BS EN 61784-5-19:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking
2、 permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 61784-5-19:2013. It isidentical to IEC 61784-5-19:2013.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement and
3、control, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 20
4、14.Published by BSI Standards Limited 2014ISBN 978 0 580 81616 1ICS 25.040.40; 35.100.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/
5、corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-19:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 61784-5
6、-19 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rig
7、hts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-19:2013 E ICS 25.040.40; 35.100.40 English version Industrial communication networks - Profiles - Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19 (IEC 61784-5-19:2013
8、) Rseaux de communication industriels - Profils - Partie 5-19: Installation des bus de terrain - Profils dinstallation pour CPF 19 (CEI 61784-5-19:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-19: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 19 (IEC 61784
9、-5-19:2013) This European Standard was approved by CENELEC on 2013-10-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl
10、iographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re
11、sponsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Fi
12、nland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-19:2013Copyr
13、ight British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 61784-5-19:2013 - 2 - Foreword The text of document 65C/738/FDIS, future edition 1 of IEC 61784-5-19, prepared by SC 65C
14、 “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-19:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publi
15、cation of an identical national standard or by endorsement (dop) 2014-07-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-14 This standard is to be used in conjunction with EN 61918:2013. Attention is drawn to the possibility that some o
16、f the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-19:2013 was approved by CENELEC as a European Standard without an
17、y modification. BS EN 61784-5-19:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 61784-5-19:2013 Annex ZA (normative) Normative references to internationa
18、l publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the r
19、eferenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN
20、61918:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN 61918 2013 BS EN 61784-5-19:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networki
21、ng permitted without license from IHS-,-,- 2 61784-5-19 IEC:2013 CONTENTS INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms, definitions and abbreviated terms . 8 4 CPF19: Overview of installation profiles . 8 5 Installation profile conventions . 8 6 Conformance to installation profile
22、s 9 Annex A (normative) CP 19/1 (MECHATROLINK-II) specific installation profile . 11 A.1 Installation profile scope . 11 A.2 Normative references . 11 A.3 Installation profile terms, definitions, and abbreviated terms . 11 A.3.1 Terms and definitions 11 A.3.2 Abbreviated terms . 11 A.3.3 Conventions
23、 for installation profiles . 11 A.4 Installation planning . 12 A.4.1 General . 12 A.4.2 Planning requirements . 12 A.4.3 Network capabilities 12 A.4.4 Selection and use of cabling components 14 A.4.5 Cabling planning documentation 21 A.4.6 Verification of cabling planning specification . 21 A.5 Inst
24、allation implementation . 22 A.5.1 General requirements 22 A.5.2 Cable installation . 22 A.5.3 Connector installation 23 A.5.4 Terminator installation . 24 A.5.5 Device installation . 24 A.5.6 Coding and labelling 24 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 24 A.5.8 A
25、s-implemented cabling documentation . 25 A.6 Installation verification and installation acceptance test 25 A.6.1 General . 25 A.6.2 Installation verification . 25 A.6.3 Installation acceptance test . 26 A.7 Installation administration . 26 A.8 Installation maintenance and installation troubleshootin
26、g . 27 Annex B (normative) CP 19/2 (MECHATROLINK-III) specific installation profile . 29 B.1 Installation profile scope . 29 B.2 Normative references . 29 B.3 Installation profile terms, definitions, and abbreviated terms . 29 B.3.1 Terms and definitions 29 B.3.2 Abbreviated terms . 29 B.3.3 Convent
27、ions for installation profiles . 29 BS EN 61784-5-19:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-19 IEC:2013 3 B.4 Installation planning . 29 B.4.1 Ge
28、neral . 29 B.4.2 Planning requirements . 29 B.4.3 Network capabilities 30 B.4.4 Selection and use of cabling components 31 B.4.5 Cabling planning documentation 36 B.4.6 Verification of cabling planning specification . 36 B.5 Installation implementation . 37 B.5.1 General requirements 37 B.5.2 Cable
29、installation . 37 B.5.3 Connector installation 38 B.5.4 Terminator installation . 38 B.5.5 Device installation . 38 B.5.6 Coding and labelling 39 B.5.7 Earthing and bonding of equipment and devices and shield cabling . 39 B.5.8 As-implemented cabling documentation . 39 B.6 Installation verification
30、and installation acceptance test 39 B.6.1 General . 39 B.6.2 Installation verification . 39 B.6.3 Installation acceptance test . 40 B.7 Installation administration . 40 B.8 Installation maintenance and installation troubleshooting . 40 Bibliography 41 Figure 1 Standards relationships 7 Figure A.1 To
31、pology of CP 19/1 network 13 Figure A.2 Network expansion using repeater 13 Figure A.3 Structure of cable . 15 Figure A.4 Dimensions of single port device connector 17 Figure A.5 Dimensions of dual ports device connector . 17 Figure A.6 Dimensions of cable connector . 18 Figure A.7 Cable connector w
32、ith inductors . 18 Figure A.8 Terminator connection in cable connector housing 19 Figure A.9 Wiring example . 23 Figure A.10 Terminator installed in M-II cable connector 24 Figure A.11 Division of network segment by changing terminator location 28 Figure B.1 Dimensions of IMI device connector 33 Fig
33、ure B.2 Dimensions of IMI cable connector . 34 Table A.1 Basic network characteristics for balanced cabling not based on Ethernet . 13 Table A.2 Number of devices and maximum segment length 14 Table A.3 Information relevant to copper cable: fixed cables 15 Table A.4 Additional cable specifications .
34、 15 Table A.5 Connectors for copper cabling CPs not based on Ethernet . 16 Table A.6 Parameters for balanced cables . 22 Table A.7 Pin assignment and wire colour coding for CP 19/1 connector . 24 BS EN 61784-5-19:2013Copyright British Standards Institution Provided by IHS under license with BSI - Un
35、controlled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 4 61784-5-19 IEC:2013 Table A.8 Typical problems in a network with balanced cabling . 27 Table B.1 Network characteristics for balanced cabling based on Ethernet 31 Table B.2 Information relevant to c
36、opper cable: fixed cables 31 Table B.3 Information relevant to copper cable: cords 32 Table B.4 Connectors for balanced cabling CPs based on Ethernet . 33 Table B.5 Parameters for balanced cables . 37 Table B.6 Pin assignment and wire colour coding for CP 19/2 connector . 38 BS EN 61784-5-19:2013Cop
37、yright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-19 IEC:2013 7 INTRODUCTION This International Standard is one of a series produced to facilitate the use of commu
38、nication networks in industrial control systems. IEC 61918:2013 provides the common requirements for the installation of communication networks in industrial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific commun
39、ication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles specifie
40、d in this standard, see IEC 61158-1. Each CP installation profile is specified in a separate annex of this standard. Each annex is structured exactly as the reference standard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined in IEC 61918
41、 (planner, installer, verification personnel, validation personnel, maintenance personnel, administration personnel). By reading the installation profile in conjunction with IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which are modified
42、 or replaced. The conventions used to draft this standard are defined in Clause 5. The provision of the installation profiles in one standard for each CPF (for example IEC 61784-5-19 for CPF 19), allows readers to work with standards of a convenient size. Figure 1 Standards relationships BS EN 61784
43、-5-19:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 61784-5-19 IEC:2013 INDUSTRIAL COMMUNICATION NETWORKS PROFILES Part 5-19: Installation of fieldbuses Inst
44、allation profiles for CPF 19 1 Scope This part of IEC 61784 specifies the installation profiles for CPF 19 (MECHATROLINK1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2013. 2 Normative references The following documents, in whole or i
45、n part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61918:2013, Industrial communication netw
46、orks Installation of communication networks in industrial premises The normative references of IEC 61918:2013, Clause 2, apply. For profile specific normative references, see Clause A.2. 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbrevia
47、ted terms given in IEC 61918:2013, Clause 3, apply. For profile specific terms, definitions and abbreviated terms see Clauses A.3 and B.3. 4 CPF19: Overview of installation profiles CPF 19 consists of two Communication Profiles as specified in IEC 61784-1. The installation requirements for CP 19/1 (
48、MECHATROLINK-II) are specified in Annex A. The installation requirements for CP 19/2 (MECHATROLINK-III) are specified in Annex B. 5 Installation profile conventions The numbering of the clauses and subclauses in the annexes of this standard corresponds to the numbering of IEC 61918 main clauses and subclauses. _ 1MECHATROLINK is a trade name of YASKAWA ELECTRIC CORPORATION. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1