BS EN 61850-7-3-2011 Communication networks and systems for power utility automation Basic communication structure Common data classes《功率效用自动控制用通信网络和系统 基本通信结构 公用数据类别》.pdf

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication Communication networks and systems for power utility automation Part 7-3: Basic communication structure Common data classes BS EN 61850-7-3:2011National foreword This British

2、Standard is the UK implementation of EN 61850-7-3:2011. It is identical to IEC 61850-7-3:2010. It supersedes BS EN 61850-7-3:2003 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PEL/57, Power systems management and associated information exchange. A l

3、ist of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 60650 2 ICS 33.200 Compliance with a Bri

4、tish Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2011. Amendments issued since publication Amd. No. Date Text affected BRITISH STANDARD BS EN 61850-7-3:2011 EUROPEAN STANDAR

5、D EN 61850-7-3 NORME EUROPENNE EUROPISCHE NORM February 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All righ

6、ts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61850-7-3:2011 E ICS 33.200 Supersedes EN 61850-7-3:2003English version Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes

7、(IEC 61850-7-3:2010) Rseaux et systmes de communication pour lautomatisation des systmes lectriques - Partie 7-3: Structure de communication de base - Classes de donnes communes (CEI 61850-7-3:2010) Kommunikationsnetze und -systeme fr die Automatisierung in der elektrischen Energieversorgung - Teil

8、7-3: Grundlegende Kommunikationsstruktur - Gemeinsame Datenklassen (IEC 61850-7-3:2010) This European Standard was approved by CENELEC on 2011-01-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the sta

9、tus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German)

10、. A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, C

11、roatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61850-7-3:2

12、011EN 61850-7-3:2011 - 2 - Foreword The text of document 57/1087/FDIS, future edition 2 of IEC 61850-7-3, prepared by IEC TC 57, Power systems management and associated information exchange, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61850-7-3 on 2010-12-07. Thi

13、s European Standard supersedes EN 61850-7-3:2003. Compared to EN 61850-7-3:2003, this edition: defines new common data classes used for new standards defining object models for other domains based on EN 61850 and for the representation of statistical and historical data; provides clarifications and

14、corrections to EN 61850-7-3:2003. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which th

15、e EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-09-07 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-12-07 Annex ZA has been added by CENELEC. _ Endorsement notice The text

16、 of the International Standard IEC 61850-7-3:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61850-8 series NOTE Harmonized in EN 61850-8 series (not modifie

17、d). IEC 61850-9 series NOTE Harmonized EN 61850-9 series (not modified). _ BS EN 61850-7-3:2011 - 3 - EN 61850-7-3:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the

18、application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the rele

19、vant EN/HD applies. Publication Year Title EN/HD Year IEC/TS 61850-2 - Communication networks and systems in substations - Part 2: Glossary - - IEC 61850-7-1 - Communication networks and systems in substations - Part 7-1: Basic communication structure for substation and feeder equipment - Principles

20、 and models EN 61850-7-1 - IEC 61850-7-2 - Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) EN 61850-7-2 - IEC 61850-7-4 - Communication networks and systems for power utility a

21、utomation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes EN 61850-7-4 - ISO 4217 - Codes for the representation of currencies and funds - - IEEE C37.118 2005 IEEE Standard for Synchrophasors for Power Systems - - BS EN 61850-7-3:2011 2 61850-7-3 I

22、EC:2010 CONTENTS INTRODUCTION 8 1 Scop e 9 2 Normative references 9 3 Terms and definitions 10 4 Abbreviated terms 10 5 Conditions for attribute inclusion 10 6 Constructed attribute classes . 11 6.1 General . 11 6.2 Quality 11 6.2.1 Overview 11 6.2.2 Va lidity . 12 6.2.3 Detail quality 13 6.2.4 Sour

23、ce . 14 6.2.5 Test . 14 6.2.6 Frozen by operator 14 6.2.7 Quality in the client server context 15 6.2.8 Relation between quality identifiers . 16 6.3 Analogue value 18 6.4 Configuration of analogue value 18 6.5 Range configuration . 19 6.6 Step position with transient indication. 19 6.7 Pulse config

24、uration. 20 6.8 Originator 20 6.9 Unit definition 21 6.10 Vector definition . 21 6.11 Point definition . 22 6.12 CtlModels definition 22 6.13 SboClasses definition . 22 6.14 Cell. 22 6.15 CalendarTime definition 23 7 Common data class specifications 25 7.1 General . 25 7.2 Name spaces . 25 7.3 Commo

25、n data class specifications for status information 25 7.3.1 Application of services . 25 7.3.2 Single point status (SPS) . 26 7.3.3 Double point status (DPS) 27 7.3.4 Integer status (INS) . 27 7.3.5 Enumerated status (ENS). 28 7.3.6 Protection activation information (ACT) . 28 7.3.7 Directional prot

26、ection activation information (ACD) . 29 7.3.8 Security violation counting (SEC) 30 7.3.9 Binary counter reading (BCR) . 30 7.3.10 Histogram (HST) . 31 BS EN 61850-7-3:201161850-7-3 IEC:2010 3 7.3.11 Visible string status (VSS) 31 7.4 Common data class specifications for measurand information . 32 7

27、.4.1 Application of services . 32 7.4.2 Measured value (MV) 33 7.4.3 Complex measured value (CMV) . 34 7.4.4 Sampled value (SAV) 35 7.4.5 Phase to ground/neutral related measured values of a three-phase system (WYE) . 36 7.4.6 Phase to phase related measured values of a three-phase system (DEL) . 37

28、 7.4.7 Sequence (SEQ) . 38 7.4.8 Harmonic value (HMV) . 39 7.4.9 Harmonic value for WYE (HWYE) . 40 7.4.10 Harmonic value for DEL (HDEL) . 41 7.5 Common data class specifications for controls 42 7.5.1 Application of services . 42 7.5.2 Controllable single point (SPC) . 43 7.5.3 Controllable double p

29、oint (DPC) . 44 7.5.4 Controllable integer status (INC) . 45 7.5.5 Controllable enumerated status (ENC) 46 7.5.6 Binary controlled step position information (BSC) . 47 7.5.7 Integer controlled step position information (ISC) . 48 7.5.8 Controllable analogue process value (APC) . 49 7.5.9 Binary cont

30、rolled analog process value (BAC) 50 7.6 Common data class specifications for status settings . 51 7.6.1 Application of services . 51 7.6.2 Single point setting (SPG) 51 7.6.3 Integer status setting (ING) 52 7.6.4 Enumerated status setting (ENG) 52 7.6.5 Object reference setting (ORG) 53 7.6.6 Time

31、setting group (TSG) . 53 7.6.7 Currency setting group (CUG) 54 7.6.8 Visible string setting (VSG) 54 7.7 Common data class specifications for analogue settings 55 7.7.1 Application of services . 55 7.7.2 Analogue setting (ASG) . 56 7.7.3 Setting curve (CURVE) 57 7.7.4 Curve shape setting (CSG) 58 7.

32、8 Common data class specifications for description information . 59 7.8.1 Application of services . 59 7.8.2 Device name plate (DPL) . 60 7.8.3 Logical node name plate (LPL) . 61 7.8.4 Curve shape description (CSD). 62 8 Data attribute semantic . 63 Annex A (normative) Value range for units and mult

33、iplier . 78 Annex B (informative) Functional constraints 81 Annex C (normative) Tracking of configuration revisions . 83 Annex D (normative) SCL enumerations . 84 BS EN 61850-7-3:2011 4 61850-7-3 IEC:2010 Bibliography . 90 Figure 1 Quality identifiers in a single client-server relationship 15 Figure

34、 2 Quality identifiers in a multiple client-server relationship . 15 Figure 3 Interaction of substitution and validity . 17 Figure 4 Configuration of command output pulse . 20 Figure 5 Cell definition . 23 Figure 6 Two-dimensional curve represented by CSG 58 Figure 7 Two-dimensional shape created by

35、 multiple CSG . 59 Table 1 Conditions for presence of attributes 10 Table 2 Quality 12 Table 3 Relation of the detailed quality identifiers with invalid or questionable quality . 13 Table 4 Analogue value 18 Table 5 Configuration of analogue value 18 Table 6 Range configuration . 19 Table 7 Step pos

36、ition with transient indication 19 Table 8 Pulse configuration 20 Table 9 Originator 21 Table 10 Values for orCat . 21 Table 11 Unit 21 Table 12 Vector . 21 Table 13 Point . 22 Table 14 Cell . 23 Table 15 CalendarTime 24 Table 16 Semantic interpretation of calendar time settings . 24 Table 17 Name s

37、pace attributes 25 Table 18 Basic status information template. 26 Table 19 Single point status common data class definition . 26 Table 20 Double point status common data class specification . 27 Table 21 Integer status common data class specification . 27 Table 22 Enumerated status common data class

38、 specification 28 Table 23 Protection activation information common data class specification. 28 Table 24 Directional protection activation information common data class specification. 29 Table 25 Security violation counting common data class specification . 30 Table 26 Binary counter reading common

39、 data class specification 30 Table 27 Histogram common data class specification 31 Table 28 Visible string status common data class definition . 31 Table 29 Basic measurand information template . 32 Table 30 Measured value . 33 Table 31 Complex measured value 34 Table 32 Sampled value . 35 BS EN 618

40、50-7-3:201161850-7-3 IEC:2010 5 Table 33 WYE . 36 Table 34 Delta . 37 Table 35 Sequence 38 Table 36 Harmonic value 39 Table 37 Harmonic values for WYE . 40 Table 38 Harmonic values for delta 41 Table 39 Basic controllable status information template . 42 Table 40 Controllable single point 43 Table 4

41、1 Controllable double point 44 Table 42 Controllable integer status 45 Table 43 Controllable enumerated status . 46 Table 44 Binary controlled step position information 47 Table 45 Integer controlled step position information . 48 Table 46 Controllable analogue process value 49 Table 47 Binary contr

42、olled analog process value . 50 Table 48 Basic status setting template . 51 Table 49 Single point setting . 51 Table 50 Integer status setting 52 Table 51 Enumerated status setting . 52 Table 52 Object reference setting common data class specification 53 Table 53 Time setting group common data class

43、 specification 53 Table 54 Currency setting group common data class specification 54 Table 55 Visible string setting group common data class specification . 54 Table 56 Basic analogue setting template 55 Table 57 Analogue setting 56 Table 58 Setting curve . 57 Table 59 Curve shape setting 58 Table 6

44、0 Basic description information template . 59 Table 61 Device name plate common data class specification 60 Table 62 Logical node name plate common data class specification 61 Table 63 Curve shape description common data class specification 62 Table 64 Semantics of data attributes and data. 63 Table

45、 A.1 SI units: base units . 78 Table A.2 SI units: derived units 78 Table A.3 SI units: extended units . 79 Table A.4 SI units: industry specific units . 79 Table A.5 Multiplier 80 Table B.1 Functional constraints . 82 BS EN 61850-7-3:2011 8 61850-7-3 IEC:2010 INTRODUCTION This document is part of a

46、 set of specifications, which details layered substation com- munication architecture. This architecture has been chosen to provide abstract definitions of classes and services such that the specifications are independent of specific protocol stacks and objects. The mapping of these abstract classes

47、 and services to communication stacks is outside the scope of IEC 61850-7-x and may be found in IEC 61850-8-x (station bus) and IEC 61850-9-x (process bus). IEC 61850-7-1 gives an overview of this communication architecture. This part of IEC 61850 defines constructed attributed classes and common da

48、ta classes related to applications in the power system using IEC 61850 modeling concepts like substations, hydro power or distributed energy resources. These common data classes are used in IEC 61850-7-4 to define compatible dataObject classes. The SubDataObjects, DataAttributes or SubAttributes of

49、the instances of dataObject are accessed using services defined in IEC 61850-7-2. This part of IEC 61850 is used to specify the abstract common data class and constructed attribute class definitions. These abstract definitions are mapped into concrete object definitions that are to be used for a particular protocol (for example MMS, ISO 9506 series). Note th