BS EN 61850-8-1-2011 Communication networks and systems for power utility automation Specific communication service mapping (SCSM) Mappings to MMS (ISO 9506-1 and ISO 9506-2) and t.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationCommunication networks and systems for power utility automationPart 8-1: Specific communication service mapping (SCSM) Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC

2、8802-3BS EN 61850-8-1:2011National forewordThis British Standard is the UK implementation of EN 61850-8-1:2011. It is identical to IEC 61850-8-1:2011. It supersedes BS EN 61850-8-1:2004,which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PEL/57, Power syst

3、ems management and associated information exchange.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISB

4、N 978 0 580 59455 7 ICS 33.200Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2011.Amendments issued since publicationAmd. No. Date Text affectedBRI

5、TISH STANDARDBS EN 61850-8-1:2011EUROPEAN STANDARD EN 61850-8-1 NORME EUROPENNE EUROPISCHE NORM September 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Ma

6、rnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61850-8-1:2011 E ICS 33.200 Supersedes EN 61850-8-1:2004English version Communication networks and systems for power utility automation - Part 8-1: Sp

7、ecific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 (IEC 61850-8-1:2011) Rseaux et systmes de communication pour lautomatisation des systmes lectriques - Partie 8-1: Mise en correspondance des services de communication spcifiques (SCSM) - M

8、ises en correspondance pour MMS (ISO 9506-1 et ISO 9506-2) et pour lISO/CEI 8802-3 (CEI 61850-8-1:2011) Kommunikationsnetze und -systeme fr die Automatisierung der elektrischen Energieversorgung - Teil 8-1: Spezifische Abbildung von Kommunikationsdiensten (SCSM) - Abbildungen auf MMS (nach ISO 9506-

9、1 und ISO 9506-2) und ISO/IEC 8802-3 (IEC 61850-8-1:2011) This European Standard was approved by CENELEC on 2011-07-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wit

10、hout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other langu

11、age made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Repu

12、blic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61850-8-1:2011EN 61850-8-1:2011 Foreword

13、The text of document 57/1109/FDIS, future edition 2 of IEC 61850-8-1, prepared by IEC TC 57, Power systems management and associated information exchange, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61850-8-1 on 2011-07-22. This European Standard supersedes EN 61

14、850-8-1:2004. The main changes with respect to EN 61850-8-1:2004 are listed below: the support of gigabit Ethernet, the link layer redundancy, the extension of the length of the object reference, the extension of the reason for inclusion type for comprehensive logging, the mapping of the tracking se

15、rvices, a second mapping of the objectReference when used in the tracking services, or as linking, the extension of the AdditionalCause enumeration, the simulation of GOOSE telegram, the so-called fixed-length encoded GOOSE, the removal of the SCL Control Block, the mappings of ACSI service error co

16、des and ISO 9506 error codes have changed (see 8.1.3.4). One change that should be noted is the change in usage of object-undefined. The object-undefined code has been replaced by object-non-existent in many responses. Attention is drawn to the possibility that some of the elements of this document

17、may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (do

18、p) 2012-04-22 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-07-22 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61850-8-1:2011 was approved by CENELEC as a European Standard without any modifi

19、cation. _ BS EN 61850-8-1:2011EN 61850-8-1:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cit

20、ed applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60874-10-1 199

21、7 Connectors for optical fibres and cables - Part 10-1: Detail specification for fibre optic connector type BFOC/2,5 terminated to multimode fibre type A1 - - IEC 60874-10-2 1997 Connectors for optical fibres and cables - Part 10-2: Detail specification for fibre optic connector type BFOC/2,5 termin

22、ated to single-mode fibre type B1 - - IEC 60874-10-3 1997 Connectors for optical fibres and cables - Part 10-3: Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre - - IEC 61850 Series Communication networks and systems in substations EN 61850 Series IEC/TS 6185

23、0-2 - Communication networks and systems in substations - Part 2: Glossary - - IEC 61850-5 - Communication networks and systems in substations - Part 5: Communication requirements for functions and device models EN 61850-5 - IEC 61850-6 2009 Communication networks and systems for power utility autom

24、ation - Part 6: Configuration description language for communication in electrical substations related to IEDs EN 61850-6 2010 IEC 61850-7-1 201X1)Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models EN 61850-7-1 201X1)IEC

25、61850-7-2 2010 Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) EN 61850-7-2 2010 IEC 61850-7-3 2010 Communication networks and systems for power utility automation - Part 7-3:

26、Basic communication structure - Common data classes EN 61850-7-3 2011 1)At draft stage. BS EN 61850-8-1:2011EN 61850-8-1:2011 IEC 61850-7-4 2010 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object

27、 classes EN 61850-7-4 2010 IEC 61850-9-1 2003 Communication networks and systems in substations - Part 9-1: Specific Communication Service Mapping (SCSM) - Sampled values over serial unidirectional multidrop point to point link EN 61850-9-1 2003 IEC 61850-9-2 201X1)Communication networks and systems

28、 for power utility automation - Part 9-2: Specific Communication Service Mapping (SCSM) - Sampled values over ISO/IEC 8802-3 EN 61850-9-2 201X1)IEC/TS 62351-6 - Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850 - - IEC 62

29、439-3 + A1 2010 201X1)Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High availability Seamless Redundancy (HSR) EN 62439-3 + A1 2010 201X1)ISO/IEC 7498-1 1994 Information technology - Open Systems Interconnection - Basic Re

30、ference Model: The Basic Model - - ISO/IEC 7498-3 1997 Information technology - Open Systems Interconnection - Basic Reference Model: Naming and addressing - - ISO/IEC 8072 1996 Information technology - Open systems interconnection - Transport service definition - - ISO/IEC 8073 1997 Information tec

31、hnology - Open Systems Interconnection - Protocol for providing the connection-mode transport service - - ISO/IEC 8326 1996 Information technology - Open systems Interconnection - Session service definition - - ISO/IEC 8327-1 1997 Information technology - Open Systems Interconnection - Connection-or

32、iented Session protocol: Protocol specification - - ISO/IEC 8348 2002 Information technology - Open Systems Interconnection - Network service definition - - ISO/IEC 8473-1 1998 Information technology - Protocol for providing the connectionless-mode network service: Protocol specification - - ISO/IEC

33、 8473-2 1996 Information technology - Protocol for profiding the connectionless mode network service - Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork - - ISO/IEC 8602 1995 Information technology - Protocol for providing the OSI connectionless-mode transport service - - BS

34、EN 61850-8-1:2011EN 61850-8-1:2011 ISO/IEC 8649 1996 Information technology - Open systems interconnection - Service definition for the Association Control Service Element (ACSE) - - ISO/IEC 8650-1 1996 Information technology - Open systems interconnection - Connection-oriented protocol for the asso

35、ciation control service element: Protocol specification - - ISO/IEC 8802-2 1998 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 2: Logical link control - - ISO/IEC 8802-3 2000 Information techn

36、ology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - - ISO/IEC 8822 1994 Information technology -

37、 Open Systems Interconnection - Presentation service definition - - ISO/IEC 8823-1 1994 Information technology - Open Systems Interconnection -Connection-oriented presentation protocol: Protocol specification - - ISO/IEC 8824-1 2008 Information technology - Abstract Syntax Notation One (ASN.1): Spec

38、ification of basic notation - - ISO/IEC 8825-1 2008 Information technology - ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) - - ISO/IEC 8877 1992 Information technology - Telecommunications and information exch

39、ange between systems - Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T - - ISO/IEC 9542 1988 Information processing systems - Telecommunications and information exchange between systems - End system to intermediate system routing exchan

40、ge protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473) - - ISO/IEC 9548-1 1996 Information technology - Open Systems Interconnection - Connectionless Session protocol: Protocol specification - - ISO/IEC 9576-1 1995 Information technology

41、 - Open Systems Interconnection - Connectionless Presentation protocol: Protocol specification - - ISO/IEC 10035-1 + A1 1995 1998 Information technology - Open Systems Interconnection - Connectionless protocol for the Association Control Service Element: Protocol specification - - - - BS EN 61850-8-

42、1:2011EN 61850-8-1:2011 ISO/IEC ISP 10608-1 1992 Information technology - International Standardized Profile TAnnnn - Connection-mode Transport Service over Connectionless-mode Network Service - Part 1: General overview and subnetwork-independent requirements - - ISO/IEC ISP 10608-2 1992 Information

43、 technology - International Standardized Profile TAnnnn - Connection-mode Transport Service over Connectionless-mode Network Service - Part 2: TA51 profile including subnetwork-dependent requirements for CSMA/CD Local Area Networks (LANs) - - ISO/IEC 11188-1 1995 Information technology - Internation

44、al Standardized Profile - Common upper layer requirements - Part 1: Basic connection oriented requirements - - ISO/IEC 11188-3 1996 Information technology - Common upper layer requirements - Part 3: Minimal OSI upper layer facilities - - ISO 9506 Series Industrial automation systems - Manufacturing

45、Message Specification - - ISO 9506-1 2003 Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition - - ISO 9506-2 2003 Industrial automation systems - Manufacturing Message Specification - Part 2: Protocol specification - - ISO/ISP 14226-1 1996 Industrial auto

46、mation systems - International Standardized Profile AMM11: MMS General Applications Base Profile - Part 1: Specification of ACSE, Presentation and Session protocols for the use by MMS - - ISO/ISP 14226-2 1996 Industrial automation systems - International Standardized Profile AMM11: MMS General Appli

47、cations Base Profile - Part 2: Common MMS requirements - - ISO/ISP 14226-3 1996 Industrial automation systems - International Standardized Profile AMM11: MMS General Applications Base Profile - Part 3: Specific MMS requirements - - IEEE C37.111 1999 IEEE Standard for Common Format for Transient Data

48、 Exchange (COMTRADE) for Power Systems - - IEEE 754 1985 Binary Floating-Point Arithmetic (R1990) - - IEEE 802.1Q 1998 IEEE Standard for Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks - - IEEE 802.1D 2004 IEEE Standard for Local and Metropoitan Area Networks - Media Access

49、 Control (MAC) Bridges - - RFC 614 - Comments on the File Transfer Protocol - - RFC 640 - Revised FTP reply codes - - BS EN 61850-8-1:2011EN 61850-8-1:2011 RFC 768 - User Datagram Protocol - - RFC 791 - Internet Protocol - DARPA Internet Program Protocol Specification - - RFC 792 - Internet Control Message Protocol - - RFC 793 - Transmission Control Protocol - DARPA Internet Program Protocol Specification - - RFC 826 - Ethernet Address Resolution Protocol - - RFC 894 - Standard for the Transmission of IP Datagra