BS EN 61858-2-2014 Electrical insulation systems Thermal evaluation of modifications to an established electrical insulation system (EIS) Form-wound EIS《电气绝缘系统 对现有电气绝缘系统(EIS)改造的热评估.pdf

1、BSI Standards PublicationElectrical insulation systems Thermal evaluation of modifications to an established electrical insulation system (EIS)Part 2: Form-wound EISBS IEC 61858-2:2014BS EN 61858-2:2014BS EN 61858-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation

2、 of EN 61858-2:2014. It is identical to IEC 61858-2:2014. It supersedes BS IEC 61858-2:2014, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/112, Evaluation and qualification of electrical insulating materials and systems.A list of organizations re

3、presented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978

4、0 580 86919 8ICS 29.080.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2014.Amendments/corrigenda issued since publicationDate Text affected30 Jun

5、e 2014 This corrigendum renumbers BS IEC 61858-2:2014 as BS EN 61858-2:2014. Annex ZA insertedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61858-2 May 2014 ICS 29.080.30 English Version Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulatio

6、n system (EIS) - Part 2: Form-wound EIS (IEC 61858-2:2014) Systmes disolation lectrique - valuation thermique des modifications apportes un systme disolation lectrique (SIE) prouv - Partie 2: Systme disolation lectrique enroulements prforms (CEI 61858-2:2014) Elektrische Isoliersysteme - Thermische

7、Bewertung von Vernderungen an einem erprobten elektrischen Isoliersystem (EIS) - Teil 2: EIS mit Flachdraht-Wicklungen (IEC 61858-2:2014) This European Standard was approved by CENELEC on 2014-03-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co

8、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard

9、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the

10、 national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland

11、, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17

12、, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61858-2:2014 E EN 61858-2:2014 - 2 - Foreword The text of document 112/253/CDV, future edition 1 of IEC 61858-2, prepared by IEC/TC 112 “Evaluation and qualifica

13、tion of electrical insulating materials and systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61858-2:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or

14、 by endorsement (dop) 2014-12-19 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-03-19 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held

15、responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61858-2:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standar

16、d indicated: IEC 60172 NOTE Harmonized as EN 60172. 2 BS EN 61858-2:2014EN 61858-2:2014EN 61858-2:2014 - 2 - Foreword The text of document 112/253/CDV, future edition 1 of IEC 61858-2, prepared by IEC/TC 112 “Evaluation and qualification of electrical insulating materials and systems“ was submitted

17、to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61858-2:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-12-19 latest date by which the national

18、standards conflicting with the document have to be withdrawn (dow) 2017-03-19 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsem

19、ent notice The text of the International Standard IEC 61858-2:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60172 NOTE Harmonized as EN 60172. - 3 - EN 61858-

20、2:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition ci

21、ted applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60034-18-31 2

22、012 Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines EN 60034-18-31 2012 IEC 60085 2007 Electrical insulation - Thermal evaluation a

23、nd designation EN 60085 2008 IEC 60216-5 - Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material EN 60216-5 - IEC 60216-6 - Electrical insulating materials - Thermal endurance properties - Part 6: De

24、termination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method EN 60216-6 - IEC 60317 Series Specifications for particular types of winding wires EN 60317 Series IEC 60317-16 1)- Specifications for particular types of winding wires - Part 16: Polyes

25、ter enamelled rectangular copper wire, class 155 EN 60317-16 1)- IEC 60317-17 - Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 EN 60317-17 - IEC 60317-18 - Specifications for particular types of winding wires - Part 18 :

26、Polyvinyl acetal enamelled rectangular copper wire, class 120 EN 60317-18 - IEC 60317-27 - Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire EN 60317-27 - 1)Withdrawn publication. 3 BS EN 61858-2:2014EN 61858-2:2014EN 61858-2:2014 - 4 - Public

27、ation Year Title EN/HD Year IEC 60317-28 - Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180 EN 60317-28 - IEC 60317-29 - Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated w

28、ith polyamide-imide enamelled rectangular copper wire, class 200 EN 60317-29 - IEC 60317-30 1)- Specifications for particular types of winding wires - Part 30: Polyimide enamelled rectangular copper wire, class 220 EN 60317-30 - IEC 60317-31 - Specifications for particular types of winding wires - P

29、art 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 EN 60317-31 - IEC 60317-32 - Specifications for particular types of winding wires - Part 32: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper

30、wire, temperature index 155 EN 60317-32 - IEC 60317-33 - Specifications for particular types of winding wires - Part 33: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 EN 60317-33 - IEC 60317-39 - Specifications for particular types

31、of winding wires - Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 EN 60317-39 - IEC 60317-40 - Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish impregnated, bare or enamel

32、led rectangular copper wire, temperature index 200 EN 60317-40 - IEC 60317-44 - Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 EN 60317-44 - IEC 60317-47 - Specifications for particular types of winding wires - Part

33、47: Aromatic polyimide enamelled rectangular copper wire, class 240 EN 60317-47 - IEC 60317-53 - Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 EN 60317-53 - 1)Withdrawn publication. 4 BS EN 6185

34、8-2:2014EN 61858-2:2014EN 61858-2:2014 - 4 - Publication Year Title EN/HD Year IEC 60317-28 - Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180 EN 60317-28 - IEC 60317-29 - Specifications for particular types of winding wires

35、- Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 EN 60317-29 - IEC 60317-30 1)- Specifications for particular types of winding wires - Part 30: Polyimide enamelled rectangular copper wire, class 220 EN 60317-30 - IEC 60317-31 - Speci

36、fications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 EN 60317-31 - IEC 60317-32 - Specifications for particular types of winding wires - Part 32: Glass-fibre wound, resin or varnish

37、 impregnated, bare or enamelled rectangular copper wire, temperature index 155 EN 60317-32 - IEC 60317-33 - Specifications for particular types of winding wires - Part 33: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 EN 60317-33 -

38、IEC 60317-39 - Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 EN 60317-39 - IEC 60317-40 - Specifications for particular types of winding wires - Part 40: Glass-fibre b

39、raided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 EN 60317-40 - IEC 60317-44 - Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 EN 60317-44 - IEC 60317-47 - Specifica

40、tions for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 EN 60317-47 - IEC 60317-53 - Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220

41、EN 60317-53 - 1)Withdrawn publication. - 5 - EN 61858-2:2014 Publication Year Title EN/HD Year IEC 60317-58 - Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 EN 60317-58 - IEC 60505 - Evaluation and qualification of electri

42、cal insulation systems EN 60505 - 5 BS EN 61858-2:2014EN 61858-2:2014 2 61858-2 IEC:2014 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 General considerations 9 5 Substitution of phase insulation and/or ground insulation . 11 5.1 Generically ide

43、ntical . 11 5.2 Substitution or addition of selected components and additives 11 5.3 Reduction of thickness 11 6 Substitution of winding wire . 12 6.1 Winding wire . 12 6.2 Substitution of conductor material . 13 6.3 Alternate winding wire . 13 7 Substitution of impregnating resin/varnish . 13 8 Eva

44、luation of additions 13 9 Procedure C Single-point thermal ageing test . 13 9.1 Test objects 13 9.2 Establishing the EIS relative thermal endurance index (EIS RTE) . 13 9.3 Interpretation of results . 14 10 Full thermal aging test (procedure D) . 14 Annex A (normative) Classes of winding wire . 15 A

45、nnex B (informative) Visual representation of form-wound coil manufacturing process . 16 Bibliography 22 Figure 1 Overview of evaluation methods . 10 Figure 2 Substitution of phase and ground insulation . 11 Figure 3 Substitution of winding wire 12 Figure 4 Substitution of conductor material 12 Figu

46、re B.1 Rectangular winding wire shaped into un-formed coil on coil forming machine 16 Figure B.2 Un-formed coil being wrapped with a protective fabric 17 Figure B.3 Un-formed coil completely wrapped with protective fabric . 17 Figure B.4 Coil forming machine stretches and bends oval coil to formed s

47、hape coil in the shaping apparatus . 18 Figure B.5 Formed coil with protective layer removed 18 Figure B.6 Close-up of formed coils knuckle insulation 19 Figure B.7 Formed coil with multiple layers of insulation 19 Figure B.8 Formed coils placed into the form-wound test specimen or Formette 20 Figur

48、e B.9 Insulation details . 21 Table A.1 Winding wire type Rectangular conductor 15 BS IEC 61858-2:201461858-2 IEC:2014 5 INTRODUCTION This International Standard describes procedures for the evaluation of changes to an established electrical insulation system (EIS) for form-wound electro technical d

49、evices and the effect of these changes on the thermal classification of the established EIS. This Part 2 of IEC 61858 is for form-wound EIS. Part 1 of IEC 61858 addresses modifications of wire-wound EIS. General principles for evaluation and qualification of EIS can be found in IEC 60505. Unless the procedures of this standard indicate otherwise, the principles of IEC 60505 should be followed. BS IEC 61858-2:2014 2 61858-2 IEC:2014 CONTENTS FOREWORD . 3INTRODUCTION . 51 Scope 2 Nor ative